2011 Mitsubishi Eclipse Belts and Hoses
Find Your Specific 2011 Mitsubishi Eclipse Belts and Hoses
Below you will find various in-demand Mitsubishi Belts and Hoses, components and accessories for your 2011 Eclipse. Advance Auto Parts has popular Eclipse parts like Belt Tensioners, Serpentine and V Belts, Engine Cooling Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other Eclipse model years including
2003,
2004,
2005,
2006,
2007,
2008,
2009,
2010,
2012 and more. Select a category of 2011 Mitsubishi Eclipse Belts and Hoses below and start saving instantly.
Popular 2011 Mitsubishi Eclipse Belts and Hoses Categories
Essential Belts and Hoses for 2011 Mitsubishi Eclipses
Dayco – Dayco Premium Balance Shaft Belt, 20.63 Inch With 55 Round Tooth, 95159 (Part No.95159)
from
$18.29
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.
See More
Dayco – Dayco Premium Balance Shaft Belt, 20.48 Inch With 65 Round Tooth, 95168 (Part No.95168)
from
$31.99
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.
See More
Dayco – Dayco Flex Radiator Hoses EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia., 81051 (Part No.81051)
from
$25.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 26"" Long, 1.31"" Diameter, E72109" (Part No.E72109)
from
$58.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Imperial – "Imperial 1/2"" x 12′ Engine Oil Cooler Hose, 240112" (Part No.240112)
from
$46.99
“1/2″” x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.”
See More
Imperial – Imperial Metal Line Kit for Engine Oil Coolers, 240293 (Part No.240293)
from
$59.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
See More
Dayco – Idler Pulley, Dayco, 89039 (Part No.89039)
from
$24.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Dayco – Idler Pulley, Dayco, 89134 (Part No.89134)
from
$40.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
K&N – K&N Cold Air Intake: Adds Up To 13 Horsepower, With Washable Air Filter, 69-6502TR (Part No.69-6502TR)
from
$419.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 47.25 Long, 6 Rib Count, 473K6 (Part No.473K6)
from
$23.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 47.5 Long, 6 Rib Count, 475K6 (Part No.475K6)
from
$29.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Flex Radiator Hoses EPDM Rubber, 2 Inch Long, 1.25 Inch Inner Dia., 81061 (Part No.81061)
from
$34.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.13"" Long, 1.25"" Diameter, D70897" (Part No.D70897)
from
$16.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Carquest Standard – "Carquest Serpentine Belt: 47.0"" Long, 6 Rib Count, 470K6" (Part No.470K6)
from
$19.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 47.05 Long, 6 Rib Count, 470K6 (Part No.470K6)
from
$19.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dorman – Dorman Idler Pulley (Pulley Only), 419-633 (Part No.419-633)
from
$46.99
This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
See More
Litens – Litens Tensioner Pulley: Direct Fit, Steel, 90mm Diameter, 900225A (Part No.900225A)
from
$49.49
This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Applications include Hyundai/Kia . Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Gates – Gates Vulco-Flex II Flexible Coolant Hose, 25253 (Part No.25253)
from
$28.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11.50"" Long, 1.31"" Diameter, C71792" (Part No.C71792)
from
$16.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Gates – Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28408 (Part No.28408)
from
$1.99
We are proud to offer this CARQUEST product line: CARQUEST Premium Heater Hose By Gates
See More
Gates – Gates Premium Molded Heater Hose, 19214 (Part No.19214)
from
$20.79
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 14 1/4 Inch Length, 87649 (Part No.87649)
from
$12.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Litens – Litens Idler Pulley: Direct Fit, Steel, 90mm Diameter, 900573A (Part No.900573A)
from
$57.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made to the O.E. specified design and meets all performance and durability requirements. This Heavy Duty Steel pulley is specifically designed for 2.0L/2.3L Mitsubishi car and SUV applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Dorman – Dorman Idler/Tensioner Pulley: Specific Fit, Steel, 90 mm Diameter, 419-660 (Part No.419-660)
from
$39.99
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.
See More
Dayco – Idler Pulley, Dayco, 89140 (Part No.89140)
from
$64.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999216A (Part No.999216A)
from
$156.99
This Litens belt tensioner is supplied by the original equipment tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). As with the original equipment part, this tensioner is manufactured in Japan for Mitsubishi’s 4G64 and 4G63 engines. This original equipment design maintains a lift feature for easy belt removal and replacement as well the O.E. specified steel pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Upgrade your 2011 Mitsubishi Eclipse with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 2011 Mitsubishi Eclipse, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mitsubishi or enhancing its overall performance, Belts and Hoses are key to keeping your Eclipse functioning at its best. At Advance Auto Parts, we offer a wide selection of 41 Belts and Hoses for the 2011 Mitsubishi Eclipse, designed to meet your needs without breaking the bank.
From
Belt Tensioner
replacements to
Serpentine and V Belts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2011 Mitsubishi Eclipse at great prices.
Our Belts and Hoses inventory for this model
ranges from just $1.99 to $369.99, with
an average price of $44.65.
Our 41 Belts and Hoses in stock come from 8 trusted brands, so you’re sure to find the right part for your 2011 Mitsubishi Eclipse without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Mitsubishi Eclipse, we stock popular OEM and aftermarket Belts and Hoses from top names
like Litens, Dayco, Driveworks, and more.
Litens Belts and Hoses
start at just $39.99 and boast an impressive 4.7 stars average rating from customers.
Dayco and Driveworks also bring quality to the table, with Belts and Hoses available starting at $23.49, and at an average 4.5 stars rating.
With 533 customer reviews and counting, our 2011 Mitsubishi Eclipse Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2011 Mitsubishi Eclipse is always ready to roll. We’re committed to providing you with everything you need to keep your Eclipse in top shape, all in one place.
Start shopping confidently below for your 2011 Mitsubishi Eclipse!
Best-Selling Belt Tensioners for 2011 Mitsubishi Eclipses
Enhance the driving experience in your Mitsubishi with 1 quality Belt Tensioner components, starting at $156.99.
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999216A (Part No.999216A)
from
$156.99
This Litens belt tensioner is supplied by the original equipment tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). As with the original equipment part, this tensioner is manufactured in Japan for Mitsubishi’s 4G64 and 4G63 engines. This original equipment design maintains a lift feature for easy belt removal and replacement as well the O.E. specified steel pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Most Popular 2011 Mitsubishi Eclipse Serpentine and V Belts
Customize your Mitsubishi with 16 Serpentine and V Belts products
like Serpentine Belts,
V-Belts, and
Drive Belt Idler Assemblies, all
priced under $49.99.
Dayco – Dayco Poly Rib Belt Serpentine Belt 74.5 Long, 6 Rib Count, 5060745 (Part No.5060745)
from
$41.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 47.25 Long, 6 Rib Count, 473K6 (Part No.473K6)
from
$23.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 35.83 Long, 4 Rib Count, 5040358 (Part No.5040358)
from
$30.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 74.5 Long, 6 Rib Count, 745K6 (Part No.745K6)
from
$28.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 47.25 Long, 6 Rib Count, 5060473 (Part No.5060473)
from
$36.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Dayco – Idler Pulley, Dayco, 89148 (Part No.89148)
from
$36.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 47.05 Long, 6 Rib Count, 5060470 (Part No.5060470)
from
$32.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – V-Ribbed Belt, Driveworks, 358K4 (Part No.358K4)
from
$15.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 47.05 Long, 6 Rib Count, 470K6 (Part No.470K6)
from
$19.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K060744 (Part No.K060744)
from
$49.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Dayco – Dayco Premium Balance Shaft Belt, 20.48 Inch With 65 Round Tooth, With Grooved Tip, 95341 (Part No.95341)
from
$24.29
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K040358 (Part No.K040358)
from
$39.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K060470 (Part No.K060470)
from
$34.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Carquest Standard – "Carquest Serpentine Belt: 74.5"" Long, 6 Rib Count, 745K6" (Part No.745K6)
from
$28.49
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
See More
Carquest Standard – "Carquest Serpentine Belt: 47.3"" Long, 6 Rib Count, 473K6" (Part No.473K6)
from
$23.49
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
See More
Carquest Standard – "Carquest Serpentine Belt: 47.0"" Long, 6 Rib Count, 470K6" (Part No.470K6)
from
$19.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
See More
Top Picks for 2011 Mitsubishi Eclipse Engine Cooling Hoses
Upgrade Mitsubishi Eclipses with top-quality Engine Cooling Hoses parts, including 2 OEM and aftermarket selections for your 2011 model.
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14"" Long, 1.34"" Diameter, D72592" (Part No.D72592)
from
$25.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21"" Long, 1.38"" Diameter, E72616" (Part No.E72616)
from
$56.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
In-Demand Heater Hoses for 2011 Mitsubishi Eclipses
Select from 6 premium Heater Hoses parts for your 2011 Mitsubishi Eclipse, with prices ranging from $1.99 to $40.99.
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 19 Inch Length, 87698 (Part No.87698)
from
$14.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Gates – Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28408 (Part No.28408)
from
$1.99
We are proud to offer this CARQUEST product line: CARQUEST Premium Heater Hose By Gates
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 14 1/4 Inch Length, 87649 (Part No.87649)
from
$12.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length, 87688 (Part No.87688)
from
$40.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Gates – Gates Premium Molded Heater Hose, 18868 (Part No.18868)
from
$38.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
See More
Gates – Gates Premium Molded Heater Hose, 18849 (Part No.18849)
from
$14.29
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
See More
Most Sold 2011 Mitsubishi Eclipse Radiator Hoses
Explore our best-selling Mitsubishi parts for the 2011 Eclipse among 6 OEM and aftermarket options starting from $15.99.
Dayco – Dayco Flex Radiator Hoses EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia., 81051 (Part No.81051)
from
$25.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17"" Long, 1.28"" Diameter, E72150" (Part No.E72150)
from
$38.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – Dayco Flex Radiator Hoses EPDM Rubber, 14.75 Inch Long, 1.25 Inch Inner Dia., 81041 (Part No.81041)
from
$15.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 26"" Long, 1.38"" Diameter, E72672" (Part No.E72672)
from
$61.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Gates – Gates Premium Molded Coolant Hose, 22183 (Part No.22183)
from
$45.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Gates – Gates Premium Molded Coolant Hose, 22981 (Part No.22981)
from
$35.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Top-Rated Belts and Hoses Brands For Your 2011 Mitsubishi Eclipse
Shop for the best-rated brands offering Belts and Hoses and other products for your 2011 Mitsubishi Eclipses. Below you’ll find some of our best rated Belts and Hoses from Litens, Dayco, and Driveworks, and more. Belts and Hoses from these brands that fit a 2011 Eclipse start at just $23.49 and are rated as high as 4.7 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.
Popular Litens 2011 Mitsubishi Eclipse Belts and Hoses
When it comes to maintaining or upgrading your 2011 Mitsubishi Eclipse, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 2011 Mitsubishi Eclipse. With over 2 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $39.99, with an average price of just $48.99. Plus, with over 3 customer reviews and an average rating of 4.7 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$39.99
(1)
Litens Idler/Tensioner Pulley: Direct Fit, Steel, 80mm Diameter, 900558A
“Perfect part to assist with degree timing”
from
$57.99
(2)
Litens Idler Pulley: Direct Fit, Steel, 90mm Diameter, 900573A
“Goodyear product and excelent price”
Popular Dayco 2011 Mitsubishi Eclipse Belts and Hoses
Dayco auto parts is one of the highest quality Belts and Hose brands in the market. Any 2011 Mitsubishi Eclipse owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 2011 Eclipse, Advance Auto Parts carries a full inventory of 3 Dayco Belts and Hoses. Plus you will be keeping your Mitsubishi in peak condition while saving money because prices on these Dayco Belts and Hoses range from $25.99 to $41.99, plus, with more than 50 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.
from
$38.99
(5)
"Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17"" Long, 1.28"" Diameter, E72150"
“Fit well”
from
$41.99
(37)
Dayco Poly Rib Belt Serpentine Belt 74.5 Long, 6 Rib Count, 5060745
“I replaced the factory drive belt at close to 130,000 miles. I’m usually pretty meticulous about maintenance but this one slipped through the cracks. ”
from
$25.99
(8)
Dayco Flex Radiator Hoses EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia., 81051
“Exact fit for ’97 Acura CL 2.2.”
FAQs for 2011 Mitsubishi Eclipse Belts and Hoses
Which Belts and Hoses are best-sellers for 2011 Mitsubishi Eclipses?
Out of 41 Belts and Hoses that fit 2011 Mitsubishi Eclipses, the following parts are the top sellers:
- Driveworks Poly Rib Belt Serpentine Belt 74.5 Long, 6 Rib Count, 745K6 (12025520) – $28.49
- Dayco Flex Radiator Hoses EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia., 81051 (5190991) – $25.99
- "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17"" Long, 1.28"" Diameter, E72150" (15590168) – $38.99
What’s the price range for 2011 Mitsubishi Eclipse Belts and Hoses?
Belts and Hose prices for the 2011 Mitsubishi Eclipse start at $1.99 and go up to $369.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 2011 Mitsubishi Eclipse?
The average price for Belts and Hoses for the 2011 Mitsubishi Eclipse is $44.65. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other Mitsubishi Eclipse model years?
What are the cheapest Belts and Hoses for my 2011 Mitsubishi Eclipse?
The cheapest 2011 Mitsubishi Eclipse Belts and Hoses we carry in stock are:
- Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28408 (10504876) – $1.99
- Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 14 1/4 Inch Length, 87649 (15590023) – $12.99
- Gates Premium Molded Heater Hose, 18849 (10510894) – $14.29
- Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 19 Inch Length, 87698 (19590336) – $14.99
- Dayco Flex Radiator Hoses EPDM Rubber, 14.75 Inch Long, 1.25 Inch Inner Dia., 81041 (5190975) – $15.99
What are the top-rated Belts and Hoses that fit the 2011 Mitsubishi Eclipse?
Out of 533 reviews by customers, our 2011 Mitsubishi Eclipse Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2011 Mitsubishi Eclipse and their top-rated products:
- Serpentine and V Belts
- Dayco Poly Rib Belt Serpentine Belt 35.83 Long, 4 Rib Count, 5040358 (20060962) – $30.99
- Driveworks Poly Rib Belt Serpentine Belt 47.25 Long, 6 Rib Count, 473K6 (99984557) – $23.49
- Dayco Poly Rib Belt Serpentine Belt 74.5 Long, 6 Rib Count, 5060745 (19270569) – $41.99
- Hose Fittings
- Dayco Poly Rib Belt Serpentine Belt 35.83 Long, 4 Rib Count, 5040358 (20060962) – $30.99
- Driveworks Poly Rib Belt Serpentine Belt 47.25 Long, 6 Rib Count, 473K6 (99984557) – $23.49
- Dayco Poly Rib Belt Serpentine Belt 74.5 Long, 6 Rib Count, 5060745 (19270569) – $41.99
What types of Belts and Hoses do you sell for my 2011 Mitsubishi Eclipse?
As of 8/2/26, these are some of the most in-demand types of Belts and Hoses for a 2011 Mitsubishi Eclipse:
Can I get help with 2011 Mitsubishi Eclipse Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mitsubishi Belts and Hoses and more.
What is your return policy for Mitsubishi Eclipse Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Mitsubishi Eclipse Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
