2005 Mitsubishi Eclipse Belts and Hoses

Below you will find various in-demand Mitsubishi Belts and Hoses, components and accessories for your 2005 Eclipse. Advance Auto Parts has popular Eclipse parts like Serpentine and V Belts, Fuel Hoses, Heater Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other Eclipse model years including 2003, 2004, 2006, 2007, 2008, 2009, 2010, 2011, 2012 and more. Select a category of 2005 Mitsubishi Eclipse Belts and Hoses below and start saving instantly.

Popular 2005 Mitsubishi Eclipse Belts and Hoses Categories

Serpentine Belts

Idler Pulleys

Belt Tensioner Pulleys

Engine Oil Cooler Hoses

Drive Belt Idler Assemblies

Essential Belts and Hoses for 2005 Mitsubishi Eclipses

from

$39.99

This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:

Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles.
Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$35.99

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Canada to the O.E. specified design and meets all performance and durability requirements. This Heavy duty Steel pulley is specifically designed for Subaru car and SUV applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance.
Installation instructions included.
Running surface designed and engineered for proper belt tracking.

from

$32.49

Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.

Product Features:

Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles.
Durable construction – made of fuel-resistant materials to reduce future failure potential.
Regulatory compliant – built to meet emission and inspection standards
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$20.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$34.49

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$23.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$32.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$22.79

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a round, reinforced tooth w/ grooved tip profile; designed to fit the timing sprockets precisely

from

$20.68

The Mitsuboshi Balance Shaft Belt is made to meet or exceed tough OE performance specifications and is resistant to high temperatures, is oil resistant and provides low noise and reliable operation.

Product Features:

OE-Equivalent and a direct fit application.
Precision molded teeth.
Resistant to abrasion and heat.
Durable long life performance.

from

$16.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$21.79

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:

Improved sealing surface for greater leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimum inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$32.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$13.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$104.99

This pulley is manufactured by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Germany using the O.E. specified split steel pulley design and meets all performance and durability requirements. Comes with a new spacer and washer to ensure correct fit. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$33.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$24.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$40.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$17.35

The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$47.13

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$1.79

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time
Similar to SAE 20R3 Class D-3
Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.

from

$16.79

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$23.49

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$46.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$28.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$2.49

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time, which prolongs service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Caution: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$48.49

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

from

$87.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

Upgrade your 2005 Mitsubishi Eclipse with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2005 Mitsubishi Eclipse, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mitsubishi or enhancing its overall performance, Belts and Hoses are key to keeping your Eclipse functioning at its best. At Advance Auto Parts, we offer a wide selection of 47 Belts and Hoses for the 2005 Mitsubishi Eclipse, designed to meet your needs without breaking the bank. From Serpentine and V Belt replacements to Fuel Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2005 Mitsubishi Eclipse at great prices. Our Belts and Hoses inventory for this model ranges from just $1.79 to $161.23, with an average price of $36.69. Our 47 Belts and Hoses in stock come from 9 trusted brands, so you’re sure to find the right part for your 2005 Mitsubishi Eclipse without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Mitsubishi Eclipse, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco Driveworks, and more. Dayco Belts and Hoses start at just $8.29 and boast an impressive 5 stars average rating from customers. With 482 customer reviews and counting, our 2005 Mitsubishi Eclipse Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Mitsubishi Eclipse is always ready to roll. We’re committed to providing you with everything you need to keep your Eclipse in top shape, all in one place. Start shopping confidently below for your 2005 Mitsubishi Eclipse!

Best-Selling Serpentine and V Belts for 2005 Mitsubishi Eclipses

Enhance the driving experience in your Mitsubishi with 20 quality Serpentine and V Belt components, starting at $14.29.

show more show less

from

$21.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$17.79

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$25.99

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
Belt tooth profile specifically designed to fit sprockets precisely and maintain timing effectiveness

from

$28.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$33.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$32.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$35.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$17.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$14.29

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$32.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$27.75

Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

from

$37.09

OE-Equivalent and a direct fit application.
Precision molded teeth.
Resistant to abrasion and heat.
Durable long life performance.

from

$40.49

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$36.89

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$28.52

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$28.49

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$21.99

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

from

$18.38

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

from

$15.64

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

from

$15.48

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

Top Picks for 2005 Mitsubishi Eclipse Heater Hoses

Upgrade Mitsubishi Eclipses with top-quality Heater Hoses parts, including 9 OEM and aftermarket selections for your 2005 model.

show more show less

from

$16.49

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$18.29

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$20.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$8.29

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$11.79

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$21.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$18.99

Heater Hose

from

$18.99

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$14.79

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

In-Demand Pulleys for 2005 Mitsubishi Eclipses

Select from 6 premium Pulleys parts for your 2005 Mitsubishi Eclipse, with prices ranging from $45.99 to $161.23.

show more show less

from

$85.99

This Litens pulley is manufactured by one of the largest original equipment suppliers in the world and meets all form, fit, and performance characteristics of the original equipment part . The Litens replacement part is constructed of heavy duty steel for long life and trouble free performance. NOTE: This pulley has been recently upgraded to a “pulley assembly” by including preassembled attachment hardware to improve ease of installation and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the largest original equipment part suppliers to ensure proper form, fit, and performance.
Heavy Duty steel pulley with a long lasting automotive bearing.
Precision steel stamping with close tolerance ball bearing pocket. Pre-assembled pulleys save installation time and ensure that all components are assembled to original specifications for both installation and performance
Electro-deposited coating (e-coat) for superior corrosion resistance.
Running surface designed and engineered for proper belt tracking.
97.6mm O.D.; 10.mm I.D (with bushing); 25.9mm width; smooth running surface; high-grade steel construction. For use with a 4- rib serpentine belt.

from

$45.99

This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Applications include Hyundai/Kia . Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$107.99

This pulley is manufactured by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and conforms to original equipment material and tolerance specs and meets performance and durability requirements. This pulley for Mitsubishi applications is constructed of high-grade steel for long life and optimum performance. Included with this pulley are a I.D. reducer/dust cover and a new bolt washer. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$64.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$161.23

Acc. Belt Idler Pull

from

$61.99

This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Applications include Mitsubishi . Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Most Sold 2005 Mitsubishi Eclipse Engine Cooling Hoses

Explore our best-selling Mitsubishi parts for the 2005 Eclipse among 6 OEM and aftermarket options starting from $13.99.

show more show less

from

$46.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$13.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$36.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$14.99

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$32.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$18.03

Radiator Hose

Top-Rated Belts and Hoses Brands For Your 2005 Mitsubishi Eclipse

Shop for the best-rated brands offering Belts and Hoses and other products for your 2005 Mitsubishi Eclipses. Below you’ll find some of our best rated Belts and Hoses from Dayco and Driveworks, and more. Belts and Hoses from these brands that fit a 2005 Eclipse start at just $8.29 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2005 Mitsubishi Eclipse Belts and Hoses

When it comes to maintaining or upgrading your 2005 Mitsubishi Eclipse, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2005 Mitsubishi Eclipse. With over 19 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.29, with an average price of just $27.07. Plus, with over 109 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$8.29

This product is not rated

Molded Heater Hose; EPDM Rubber, 9/32 Inch Diameter, 5 Inch Length

“”

from
$11.79

This product is not rated

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 1/2 Inch Length

“”

from
$64.99

This product is not rated

Serpentine Idler/Tensioner Pulley; Steel, 70mm Dia., 21mm Width, 4 Grooves

“”

Popular Driveworks 2005 Mitsubishi Eclipse Belts and Hoses

Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 2005 Mitsubishi Eclipse owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2005 Eclipse, Advance Auto Parts carries a full inventory of 4 Driveworks Belts and Hoses. Plus you will be keeping your Mitsubishi in peak condition while saving money because prices on these Driveworks Belts and Hoses range from $14.29 to $21.99, plus, with more than 15 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from
$17.79

(1)

Poly Rib Belt Serpentine Belt; 37.01 Long, 5 Rib Count

“Fit great”

from
$17.99

(1)

Poly Rib Belt Serpentine Belt; 54 Long, 5 Rib Count

“2000 2.4 galant. Fit for ac power steering. Can’t vouch for longevity as it’s only been 10 miles”

from
$21.99

(8)

Poly Rib Belt Serpentine Belt; 47.25 Long, 6 Rib Count

“The product was easy to assemble”

FAQs for 2005 Mitsubishi Eclipse Belts and Hoses

Which Belts and Hoses are best-sellers for 2005 Mitsubishi Eclipses?

Out of 47 Belts and Hoses that fit 2005 Mitsubishi Eclipses, the following parts are the top sellers:

Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (10504876) – $1.79
Flex Radiator Hoses; EPDM Rubber, 14.75 Inch Long, 1.25 Inch Inner Dia. (5190975) – $14.99
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22" Long, 1.31" Diameter (5190789) – $13.99

What’s the price range for 2005 Mitsubishi Eclipse Belts and Hoses?

Belts and Hose prices for the 2005 Mitsubishi Eclipse start at $1.79 and go up to $161.23 for the most premium parts.

What’s the average price of a Belts and Hose for a 2005 Mitsubishi Eclipse?

The average price for Belts and Hoses for the 2005 Mitsubishi Eclipse is $36.69. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Mitsubishi Eclipse model years?

Yes, we currently carry Belts and Hoses for 22 model years of Mitsubishi Eclipses between 1990 and 2012. Belts and Hoses are bought most frequently for the following model years: 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2004, and 2003.

What are the cheapest Belts and Hoses for my 2005 Mitsubishi Eclipse?

The cheapest 2005 Mitsubishi Eclipse Belts and Hoses we carry in stock are:

Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (10504876) – $1.79
Molded Heater Hose; EPDM Rubber, 9/32 Inch Diameter, 5 Inch Length (15590209) – $8.29
Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 1/2 Inch Length (15590145) – $11.79
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22" Long, 1.31" Diameter (5190789) – $13.99
Poly Rib Belt Serpentine Belt; 35.5 Long, 4 Rib Count (5061598) – $14.29

What are the top-rated Belts and Hoses that fit the 2005 Mitsubishi Eclipse?

Out of 482 reviews by customers, our 2005 Mitsubishi Eclipse Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2005 Mitsubishi Eclipse and their top-rated products:

Serpentine and V Belts
- Premium Balance Shaft Belt, 20.48 Inch With 65 Round Tooth (3700496) – $25.99
- Poly Rib Belt Serpentine Belt; 47.25 Long, 6 Rib Count (99984557) – $21.99
- Poly Rib Belt Serpentine Belt; 37.01 Long, 5 Rib Count (5064848) – $17.79
Engine Cooling Hoses
- Premium Balance Shaft Belt, 20.48 Inch With 65 Round Tooth (3700496) – $25.99
- Poly Rib Belt Serpentine Belt; 47.25 Long, 6 Rib Count (99984557) – $21.99
- Poly Rib Belt Serpentine Belt; 37.01 Long, 5 Rib Count (5064848) – $17.79

What types of Belts and Hoses do you sell for my 2005 Mitsubishi Eclipse?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2005 Mitsubishi Eclipse:

Can I get help with 2005 Mitsubishi Eclipse Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mitsubishi Belts and Hoses and more.

What is your return policy for Mitsubishi Eclipse Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Mitsubishi Eclipse Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2005 Mitsubishi Eclipse Belts and Hoses

Dorman – Idler/Tensioner Pulley: Specific Fit, Steel, 90 mm Diameter (Part No.419-660)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 80mm Diameter (Part No.900558A)

Dorman – Fuel Filler Neck Hose (Part No.573-052)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 1/2 Inch Length (Part No.87816)

Gates – Premium Molded Heater Hose (Part No.18868)

Driveworks – Poly Rib Belt Serpentine Belt; 51 Long, 5 Rib Count (Part No.510K5)

Dayco – Poly Rib Belt Serpentine Belt; 54 Long, 5 Rib Count (Part No.5050540)

Dayco – Premium Balance Shaft Belt, 20.48 Inch With 65 Round Tooth, With Grooved Tip (Part No.95341)

Mitsuboshi – Mitsuboshi Balance Shaft Belt (Part No.A5002312117MBL)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 1.31" Diameter (Part No.C71850)

Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25252)

Gates – Premium Molded Coolant Hose (Part No.22981)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22" Long, 1.31" Diameter (Part No.E71189)

Litens – Tensioner Pulley: Direct Fit, Steel, 76mm Diameter (Part No.900200A)

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 82mm Dia., 27mm Width, Smooth (Part No.89148)

Dayco – V-Belt Idler/Tensioner Pulley; Steel, 81mm Dia., 16.4mm Width, Grooves (Part No.89039)

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 84mm Dia., 25mm Width, Smooth (Part No.89134)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100030646MBL)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W1000168904MBL)

Gates – Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (Part No.28408)

Gates – Premium Molded Heater Hose (Part No.18030)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (Part No.80402)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 26" Long, 1.38" Diameter (Part No.E72672)

Gates – Premium Molded Coolant Hose (Part No.21557)

Gates – Safety Stripe« Standard Straight Heater Hose (Part No.28409)

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Driveworks – Poly Rib Belt Serpentine Belt; 47.25 Long, 6 Rib Count (Part No.473K6)

Driveworks – Poly Rib Belt Serpentine Belt; 37.01 Long, 5 Rib Count (Part No.370K5)

Dayco – Premium Balance Shaft Belt, 20.48 Inch With 65 Round Tooth (Part No.95168)

Dayco – Poly Rib Belt Serpentine Belt; 37.01 Long, 5 Rib Count (Part No.5050370)

Dayco – Poly Rib Belt Serpentine Belt; 47.25 Long, 6 Rib Count (Part No.5060473)

Dayco – Poly Rib Belt Serpentine Belt; 35.5 Long, 4 Rib Count (Part No.5040355)

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 90mm Dia., 31.2mm Width, Smooth (Part No.89138)

Driveworks – Poly Rib Belt Serpentine Belt; 54 Long, 5 Rib Count (Part No.540K5)

Driveworks – Poly Rib Belt Serpentine Belt; 35.5 Long, 4 Rib Count (Part No.355K4)

Dayco – Poly Rib Belt Serpentine Belt; 54 Long, 5 Rib Count (Part No.5050540)

Bando – Multi Rib (Serpentine) Belt (Part No.W100091462BAN)

Mitsubishi – Mitsuboshi Balance Shaft Belt (Part No.A5002169609MBL)

Gates – Micro-V« Serpentine Drive Belt (Part No.K040355)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100091462MBL)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100091461MBL)

Gates – Micro-V« Serpentine Drive Belt (Part No.K060470)

Bando – Multi Rib (Serpentine) Belt (Part No.W100091461BAN)

Bando – Multi Rib (Serpentine) Belt (Part No.W100027667BAN)

Bando – Multi Rib (Serpentine) Belt (Part No.W100029090BAN)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100029090MBL)

Dorman – Fuel Filler Neck Hose (Part No.573-052)

Dayco – Molded Heater Hose; EPDM Rubber, 23/64 Inch Diameter, 5 Inch Length (Part No.86825)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length (Part No.80401)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 1/2 Inch Length (Part No.87816)

Dayco – Molded Heater Hose; EPDM Rubber, 9/32 Inch Diameter, 5 Inch Length (Part No.86815)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 1/2 Inch Length (Part No.87817)

Dayco – Molded Heater Hose; EPDM Rubber, 5/16 Inch Diameter, 11 1/4 Inch Length (Part No.87007)

Gates – Heater Hose (Part No.R3030177597GAT)

Gates – Premium Molded Heater Hose (Part No.19214)

Gates – Premium Molded Heater Hose (Part No.18249)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900215A)

Litens – Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900225A)

Litens – Idler Pulley: Direct Fit, Steel, 90mm Diameter, w/ Hardware (Part No.900202A)

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 70mm Dia., 21mm Width, 4 Grooves (Part No.89140)

INA – Acc. Belt Idler Pull (Part No.G60201070299INA)

Litens – Tensioner Pulley: Direct Fit, Steel, 75mm Diameter (Part No.900219A)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 26" Long, 1.31" Diameter (Part No.E72109)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22" Long, 1.31" Diameter (Part No.E71189)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.28" Diameter (Part No.C71695)

Dayco – Flex Radiator Hoses; EPDM Rubber, 14.75 Inch Long, 1.25 Inch Inner Dia. (Part No.81041)

Gates – Premium Molded Coolant Hose (Part No.22183)

Dayco – Radiator Hose (Part No.G20001662039DAY)