2011 Mazda MX-5 Miata Transmission Parts

Name: Neutral Safety Switch
Brand: Carquest Premium
SKU: CSA3844
Price: 289.99 USD

Below you will find various in-demand Mazda Transmission Parts, components and accessories for your 2011 MX-5 Miata. Advance Auto Parts has popular MX-5 Miata parts like Automatic Transmission Pan and Gaskets, Automatic Transmission Parts, Transmission Cooler and Parts and more. You’ll also find aftermarket and OEM Transmission Parts for other MX-5 Miata model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2011 Mazda MX-5 Miata Transmission Parts below and start saving instantly.

Popular 2011 Mazda MX-5 Miata Transmission Parts Categories

OE Transmission Coolers

Manual Transmission Output Shaft Bearings

Back Up Lamp Switches

Transmission Pan Gaskets

Automatic Transmission Line Connectors

Back Up and Neutral Safety Switches

Transmission Oil Pan Gaskets

Speed Sensors

Transmission Bushings

Automatic Transmission Output Shaft Seals

Transmission Seals and O-rings

Manual Transmission Drive Axle Seals

Shift Shaft Seals

Essential Transmission Parts for 2011 Mazda MX-5 Miatas

from

$289.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$26.19

Output Shaft Seal

from

$73.99

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool® plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

from

$39.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$17.26

SKF’s clutch pilot bearings help guide and locate the driving plate in radial and axial directions and transfer loads from the clutch to the gearbox input shaft. They also enable a difference in rotational speed between crankshaft and gearbox input shafts during clutch actuation.

Product Features:

Extended service life
High running accuracy
Low noise and vibration level
Extremely compact, lightweight design
Sealed for life with high performance, application-specific grease
High axial load carrying capacity
Very high temperature resistance

from

$128.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$57.75

Speedometer Sensor

from

$16.99

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 90 minutes

from

$12.39

3.5 oz. tube, carded – OEM specified. Permatex® Ultra silicones were developed to meet today’s technology changes. Sensor-safe, low odor, noncorrosive.

Product Features:

Outstanding oil resistance and joint movement tolerance
Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones.
Temperature range -65F to 500F (-54°C to 260°C) intermittent
Resists auto and shop fluids and vibration Suggested Applications: Valve covers, oil pans, transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings. DIRECTIONS :
For best results, clean and dry all surfaces with a residue-free solvent such as Permatex® Brake and Parts Cleaner.
Cut nozzle to desired bead size. Gaskets are best formed using a 1/16 to 1/4 (2 to 6 mm) bead.
Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes.
Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
Allow to dry for one hour then re-tighten 1/4 to 1/2 turn.
Silicone will skin over in one hour and fully cure in 24 hours under normal conditions.
Allow more time for cold or very dry conditions.
Clean uncured silicone from hands, tools and clothing with Permatex® Fast Orange® Wipes or Fast Orange® Hand Cleaner. NOTE: Not recommended for use on head gaskets or on parts in contact with gasoline. TECHNICAL DATA SHEET

from

$13.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$28.49

Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:

Ideal for rigid cast aluminum parts
Meets OEM Specifications
Sensor safe & non-corrosive
Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
Blowout resistant, allowing leakproof gaskets to be made in just one minute
Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.

from

$6.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$11.49

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$13.29

Low swell in hydrocarbon fluids
Design type: spring loaded; single-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$67.99

from

$61.49

from

$23.29

Product Features:

Transmission line fitting kit
Ford; 5/8″-18 inverted flare, deep thread
Helps simplify transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines
Crafted from high-quality material that makes it durable and longer-lasting
A high quality, direct fit OE replacement
Easily connects the transmission cooler line to the cooler hose
Hose clamps required

from

$32.49

Product Features:

Transmission line fitting kit
Ford; 1/2″-20 inverted flare, deep thread
Helps simplify transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines
Crafted from high-quality material that makes it durable and longer-lasting
A high quality, direct fit OE replacement
Easily connects the transmission cooler line to the cooler hose
Hose clamps required

from

$16.27

Diff. Side Cover Sea

from

$44.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

Upgrade your 2011 Mazda MX-5 Miata with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2011 Mazda MX-5 Miata, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mazda or enhancing its overall performance, Transmission Parts are key to keeping your MX-5 Miata functioning at its best. At Advance Auto Parts, we offer a wide selection of 28 Transmission Parts for the 2011 Mazda MX-5 Miata, designed to meet your needs without breaking the bank. From Automatic Transmission Pan and Gasket replacements to Automatic Transmission Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2011 Mazda MX-5 Miata at great prices. Our Transmission Parts inventory for this model ranges from just $6.99 to $289.99, with an average price of $53.11. Our 28 Transmission Parts in stock come from 6 trusted brands, so you’re sure to find the right part for your 2011 Mazda MX-5 Miata without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Mazda MX-5 Miata, we stock popular OEM and aftermarket Transmission Parts from top names like Permatex Imperial, and more. Permatex Transmission Parts start at just $6.99 and boast an impressive 5 stars average rating from customers. With 884 customer reviews and counting, our 2011 Mazda MX-5 Miata Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2011 Mazda MX-5 Miata is always ready to roll. We’re committed to providing you with everything you need to keep your MX-5 Miata in top shape, all in one place. Start shopping confidently below for your 2011 Mazda MX-5 Miata!

Best-Selling Automatic Transmission Pan and Gaskets for 2011 Mazda MX-5 Miatas

Enhance the driving experience in your Mazda with 7 quality Automatic Transmission Pan and Gasket components, starting at $6.99.

show more show less

from

$11.49

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$6.99

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$19.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$16.99

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 90 minutes

from

$28.49

Ideal for rigid cast aluminum parts
Meets OEM Specifications
Sensor safe & non-corrosive
Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
Blowout resistant, allowing leakproof gaskets to be made in just one minute
Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.

from

$32.99

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

Designed specially for high-torque and high vibration applications
Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
OEM specified
Low-odor, non-corrosive formula
Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

from

$12.39

3.5 oz. tube, carded – OEM specified. Permatex® Ultra silicones were developed to meet today’s technology changes. Sensor-safe, low odor, noncorrosive.

Product Features:

Outstanding oil resistance and joint movement tolerance
Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones.
Temperature range -65F to 500F (-54°C to 260°C) intermittent
Resists auto and shop fluids and vibration Suggested Applications: Valve covers, oil pans, transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings. DIRECTIONS :
For best results, clean and dry all surfaces with a residue-free solvent such as Permatex® Brake and Parts Cleaner.
Cut nozzle to desired bead size. Gaskets are best formed using a 1/16 to 1/4 (2 to 6 mm) bead.
Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes.
Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
Allow to dry for one hour then re-tighten 1/4 to 1/2 turn.
Silicone will skin over in one hour and fully cure in 24 hours under normal conditions.
Allow more time for cold or very dry conditions.
Clean uncured silicone from hands, tools and clothing with Permatex® Fast Orange® Wipes or Fast Orange® Hand Cleaner. NOTE: Not recommended for use on head gaskets or on parts in contact with gasoline. TECHNICAL DATA SHEET

Most Popular 2011 Mazda MX-5 Miata Automatic Transmission Parts

Customize your Mazda with 1 Automatic Transmission Parts products like Transmission Bushings, all priced under $17.26.

show more show less

from

$17.26

Extended service life
High running accuracy
Low noise and vibration level
Extremely compact, lightweight design
Sealed for life with high performance, application-specific grease
High axial load carrying capacity
Very high temperature resistance

Top Picks for 2011 Mazda MX-5 Miata Transmission Cooler and Parts

Upgrade Mazda MX-5 Miatas with top-quality Transmission Cooler and Parts parts, including 9 OEM and aftermarket selections for your 2011 model.

show more show less

from

$85.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool® plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

from

$59.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems

from

$54.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$39.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design

from

$52.99

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$81.99

High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion

from

$67.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

In-Demand Transmission Bearings for 2011 Mazda MX-5 Miatas

Select from 1 premium Transmission Bearings parts for your 2011 Mazda MX-5 Miata.

show more show less

from

$44.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

Most Sold 2011 Mazda MX-5 Miata Transmission Seals

Explore our best-selling Mazda parts for the 2011 MX-5 Miata among 4 OEM and aftermarket options starting from $13.29.

show more show less

from

$13.79

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$26.19

Output Shaft Seal

from

$16.27

Diff. Side Cover Sea

from

$13.29

Low swell in hydrocarbon fluids
Design type: spring loaded; single-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

Top-Rated Transmission Parts Brands For Your 2011 Mazda MX-5 Miata

Shop for the best-rated brands offering Transmission Parts and other products for your 2011 Mazda MX-5 Miatas. Below you’ll find some of our best rated Transmission Parts from Permatex and Imperial, and more. Transmission Parts from these brands that fit a 2011 MX-5 Miata start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2011 Mazda MX-5 Miata Transmission Parts

When it comes to maintaining or upgrading your 2011 Mazda MX-5 Miata, using quality Transmission Parts is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Transmission Parts, specifically designed for the 2011 Mazda MX-5 Miata. With over 7 Permatex brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $18.48. Plus, with over 106 customer reviews and an average rating of 5 stars, you can trust that our Permatex Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$28.49

This product is not rated

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

“”

from
$32.99

This product is not rated

Ultra Grey RTV Gasket Maker (9.5 oz.)

“”

from
$16.99

This product is not rated

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

“”

Popular Imperial 2011 Mazda MX-5 Miata Transmission Parts

Imperial auto parts is one of the highest quality Transmission Part brands in the market. Any 2011 Mazda MX-5 Miata owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 2011 MX-5 Miata, Advance Auto Parts carries a full inventory of 11 Imperial Transmission Parts. Plus you will be keeping your Mazda in peak condition while saving money because prices on these Imperial Transmission Parts range from $23.29 to $85.99, plus, with more than 115 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from
$67.99

This product is not rated

High Performance Transmission Oil Cooler

“”

from
$85.99

(4)

High Performance Transmission Oil Cooler

“good quality,easy to install.”

from
$32.49

This product is not rated

Transmission Line Fitting Kit

“”

FAQs for 2011 Mazda MX-5 Miata Transmission Parts

Which Transmission Parts are best-sellers for 2011 Mazda MX-5 Miatas?

Out of 28 Transmission Parts that fit 2011 Mazda MX-5 Miatas, the following parts are the top sellers:

High Performance Transmission Oil Cooler (15230020) – $85.99
Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (20230013) – $80.99
The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (12079746) – $16.99

What’s the price range for 2011 Mazda MX-5 Miata Transmission Parts?

Transmission Part prices for the 2011 Mazda MX-5 Miata start at $6.99 and go up to $289.99 for the most premium parts.

What’s the average price of a Transmission Part for a 2011 Mazda MX-5 Miata?

The average price for Transmission Parts for the 2011 Mazda MX-5 Miata is $53.11. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Mazda MX-5 Miata model years?

Yes, we currently carry Transmission Parts for 18 model years of Mazda MX-5 Miatas between 2006 and 2024. Transmission Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Transmission Parts for my 2011 Mazda MX-5 Miata?

The cheapest 2011 Mazda MX-5 Miata Transmission Parts we carry in stock are:

Sensor-Safe, High Torque RTV Silicone Gasket Maker (99997948) – $6.99
Sensor-Safe, High-Torque RTV Silicone Gasket Maker (7160017) – $11.49
Ultra Grey® Rigid High-Torque RTV Silicone Gasket Maker (11263885) – $12.39
Manual Transmission Input Shaft Seal (11892519) – $13.29
Multi Purpose Seal (11077124) – $13.79

What are the top-rated Transmission Parts that fit the 2011 Mazda MX-5 Miata?

Out of 884 reviews by customers, our 2011 Mazda MX-5 Miata Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2011 Mazda MX-5 Miata and their top-rated products:

Transmission Connectors
- Transmission Line Fitting Kit (15230011) – $23.29
Automatic Transmission Pan and Gaskets
- Transmission Line Fitting Kit (15230011) – $23.29

What types of Transmission Parts do you sell for my 2011 Mazda MX-5 Miata?

As of 2/5/25, these are some of the most in-demand types of Transmission Parts for a 2011 Mazda MX-5 Miata:

Can I get help with 2011 Mazda MX-5 Miata Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mazda Transmission Parts and more.

What is your return policy for Mazda MX-5 Miata Transmission Parts?

Advance Auto Parts keeps returns simple. For new Mazda MX-5 Miata Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2011 Mazda MX-5 Miata Transmission Parts

Carquest Premium – Neutral Safety Switch (Part No.CSA3844)

Corteco – Output Shaft Seal (Part No.J1157246008CFW)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)

SKF – Pilot Bearing (Part No.I1010168419SKF)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC2521)

Mitsubishi Electric – Speedometer Sensor (Part No.P4018185142MEA)

Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)

Permatex – Ultra Grey® Rigid High-Torque RTV Silicone Gasket Maker (Part No.3K200329086PMX)

National – Multi Purpose Seal (Part No.710731)

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

National – Manual Transmission Input Shaft Seal (Part No.711043)

Carquest Premium – Back Up Light Switch (Part No.SAA2042)

Carquest Premium – Back Up Light Switch (Part No.SAA3564)

Imperial – Transmission Line Fitting Kit (Part No.240395)

Imperial – Transmission Line Fitting Kit (Part No.240394)

Corteco – Diff. Side Cover Sea (Part No.J7041185418CFW)

National – Bearings (Part No.306)

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

Permatex – Ultra Grey® Rigid High-Torque RTV Silicone Gasket Maker (Part No.3K200329086PMX)

SKF – Pilot Bearing (Part No.I1010168419SKF)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (Part No.243006)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

National – Bearings (Part No.306)

National – Multi Purpose Seal (Part No.710731)

Corteco – Output Shaft Seal (Part No.J1157246008CFW)

Corteco – Diff. Side Cover Sea (Part No.J7041185418CFW)

National – Manual Transmission Input Shaft Seal (Part No.711043)