2011 Jeep Wrangler Suspension Parts

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Designed to keep the control arms of your Jeep® Wrangler JK at factory angles, Rancho® rockGEAR® control arm geometry correction brackets deflect road harshness, reduce brake dive and allow for proper caster angle after adding an aftermarket lift kit.

Product Features:

• COMPATIBILITY — Fits Jeep Wrangler JK Unlimited and Rubicon models with 2-in. to 4-in. lift kits that utilize the factory upper and lower control arms
• MAINTAINS CASTER ANGLE — Keeps control arms at factory angles to deflect road harshness, reduce brake dive and allow for proper caster angle on lifted Jeep Wrangler JK models
• EASY TO INSTALL — Bolt-on system for easy installation features four fixed adjustment locations for each height with option for additional caster
• RESISTS CORROSION — Durable black E-coat finish resists rust and corrosion
• ENGINEERED TO LAST — Made of high-strength, low-alloy steel for long life and dependability
• ONE-PIECE SOLUTION — One-piece welded design eliminates need for adjustable control arms or cam bolts for caster correction

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

• Protects the shock’s piston rod from damage
• Universal design for easy installation
• Tie-strap included for a secure fit
• Constructed from high quality urethane for maximum durability
• Multiple color choices available

Featuring a unique, exclusive valving system and advanced compression functionality, Rancho® RS5000®X shocks deliver improved overall on- and off-road handling and performance.

Product Features:

• IMPROVED HANDLING AND PERFORMANCE — Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
• MINIMIZES ROUGH RIDE — Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
• STRONG AND DURABLE — Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
• HANDLES EXTREME TEMPERATURE CHANGES — Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
• SMOOTH PERFORMANCE — Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
• REDUCES FADE — Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
• MAINTAINS VEHICLE CONTROL — Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
• BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
• Rebound Bumper

Shock Kit

Get your 4-door Jeep® Wrangler JK ready for a day on the trail with the Rancho® 2-in. Progressive Sport suspension system. This premium suspension system features Rancho RS9000®XL front and rear shocks that allow customized damping control.

Product Features:

• COMPATIBILITY — Designed for 4-door Jeep Wrangler JK
• BUILT FOR THE TRAIL — Designed to fit up to 33-in. tires, get 2-in. of additional ground clearance needed for trail riding or on-road driving (can accommodate 35-in. tires with trimming, bumpers, sliders, winches, etc. affect lift height)
• COMPLETE SOLUTION — Kit includes four Rancho RS9000®XL shocks, front and rear progressive rate coil springs, front bump stops, rear brake line brackets and mounting hardware
• NINE LEVELS OF ADJUSTMENT — Rancho RS9000®XL shocks with nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• SUPERIOR PERFORMANCE — Front and rear progressive rate coil springs, specifically tuned to provide superior on-road comfort and off-road performance
• EASY TO INSTALL — Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
• NOTES — Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires and is designed with 33-in. tires, using 17-in. wheels with 4.5-in. backspacing (tire size varies between manufacturers)

This SES Suspension upgrade fits the front suspension of a Jeep Wrangler TJ, JK and JL. Each laser-cut piece of steel is precision welded and powder-coated to ensure a quality fit. We have engineered our hollow rubber springs to deliver a progressive spring rate. In other words, the more weight that pushes down on the rubber springs (weight from a snowplow or heavy aftermarket accessories ¿ such as a steel bumper) the harder they work to prevent front-end sag. This SES Suspension Upgrade replaces the jounce stop inside the coil spring. Its unique design ensures superb ride quality ¿ loaded or unloaded. (There should be a 0.5 Inch to 1 Inch gap between rubber spring and axle to ensure unloaded ride quality.) Unlike other auxiliary spring systems, the SES Suspension Upgrade guarantees the best of both worlds.

Product Features:

• Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Cushion Road Shocks
• Simple And Easy To Install

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

• Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
• Gas-charged unit
• Improved handling and control
• Economical OE replacement
• Meets OE product specifications

This coil spring mount kit is precision-engineered and rigorously tested to provide reliable replacement on specific vehicles.

Product Features:

• Coil Spring Mount Kit
• Suspension Coil Spring Mount Kit
• This coil spring mount kit is precision-engineered and rigorously tested to provide reliable replacement on specific vehicles.
• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components

aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement shock absorbers. These shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These are 100% designed and built in the USA. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage

aFe Power is proud to introduce the all new “Glide Guard” On-Board Compressor & Tank Mount. The Glide Guard comes powder-coated in a matte black finish with counter-sunk compressor & tank mounting holes for protection. Once the required aFe left side exit exhaust system (sold separately) is installed, the skid plate mounts neatly in the former factory muffler location tucking your air compressor and tank as high as possible (air compressor and tank not included). The Glide Guard is constructed out of 3/16″ thick steel to withstand extreme off-road conditions. This system bolts in utilizing factory locations and an additional 4 drilled holes with heavy-duty nut plates for a hassle-free install.

Product Features:

• 3/16 in. Thick Steel For Strength And Rigidity
• Maximum Corrosion Protection
• Counter Sunk Compressor
• Factory Attachment Points

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
• PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
• OE-STYLE DESIGN — Engineered to match or exceed OE requirements
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• Bushings manufactured from high quality elastomer compounds for durability and ride performance
• Assembled with proper precompression for ultimate in performance and feel

LeafSpBumper

Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Suspension Trailing Arm is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:

• Bushings included for a complete installation, saving time and labor (where applicable)
• Direct replacement for a trouble-free installation
• Steel, iron or aluminum construction ensures durability
• Powder-coated or painted for long-lasting rust and corrosion resistance INSTALLATION NOTE: It is recommended by the manufacturer that trailing arms be replaced in pairs.

Specifically tuned to provide enhanced off-road control, Rancho® front coil springs deliver 2.5-in. of lift so your Jeep® Wrangler TJ/LJ can accommodate larger wheel/tire combinations.

Product Features:

• COMPATIBILITY — Designed for Jeep Wrangler TJ/LJ
• IMPROVES PERFORMANCE — Specifically tuned to deliver enhanced off-road control
• FITS LARGER TIRES — Provides up to 2.5-in. of lift to accommodate larger wheel/tires (tire size varies by manufacturer, 2-door models, aftermarket bumpers, sliders, winches, etc. affect lift height)
• EASY TO INSTALL — Kit includes two front coil springs that install easily with included hardware
• RESISTS CORROSION — Powder-coated to resist rust and corrosion
• ENGINEERED TO LAST — Made of high-strength steel that is shot peened and heat treated for long life

The pinion and caster angles on this replacement control arm can be adjusted to accommodate modified suspensions. It is precision-engineered and manufactured from durable materials for seamless installation and reliable performance on specified makes, models and years.

Product Features:

• Versatile solution – the pinion and caster angles on this replacement control arm can be adjusted to accommodate modified suspensions
• Ensure fit – precision-engineered for seamless installation on specified vehicle years, makes, models and configurations
• Durable materials – this adjustable control arm is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

• Protects the shock’s piston rod from damage
• Universal design for easy installation
• Tie-strap included for a secure fit
• Constructed from high quality urethane for maximum durability
• Multiple color choices available

Designed to improve ride, Rancho® adjustable control arm kits are for a stock or lifted Jeep® Wrangler JL/Gladiator JT (up to 4.5-in.). Made of heavy tubing, they feature Rancho’s D2 maintenance-free bushings for reduced noise, vibration and harshness.

Product Features:

• COMPATIBILITY — Designed for stock and lifted (up to 4.5-in.) Jeep Wrangler JL and Gladiator JT
• MAINTENANCE-FREE BUSHINGS — Features Rancho’s D2 high-articulation, grease-free, self-centering bushings that have a PTFE liner in the internal bushing that serves as a lubricating agent for long-lasting, maintenance-free operation
• IMPROVES RIDE — Reduces noise, vibration and harshness for improved ride quality
• ADJUSTABLE — Allows adjustment of caster and pinion angles
• ACCOMMODATES LARGER TIRES — Engineered to accommodate larger wheels and tires
• RESISTS CORROSION — Durable black powder-coat finish resists rust and corrosion
• ENGINEERED TO LAST — 1.25-In. OD diameter bar upper arms made of heavy-duty 0.188-in. DOM wall tubing with forged ends for long life
• EASY TO INSTALL — Includes two preassembled control arms for easy installation

Designed to deliver increased ground clearance, the Rancho® 4-in. short arm lift kit delivers the ultimate on- and off-road experience for the Jeep® Wrangler JK. The progressive rate coil springs and adjustable control arms provide comfort and durability.

Product Features:

• ORDERING INFO — Box 3 of 3 for master kit RS66114B, must order RS66114B-1, RS66114B-2 and RS66114B-3 for a complete kit
• COMPATIBILITY — Designed for 2-door and 4-door Jeep Wrangler JK
• BUILT FOR THE TRAIL — Designed to fit up to 37-in. tires, get 4-in. of additional ground clearance and increased wheel travel for rock crawling, trail riding or on-road driving
• COMPLETE SOLUTION — Kit includes front and rear progressive rate coil springs, upper and lower control arms, heavy-duty front and rear adjustable track bars, extended sway bar end links, bump stop spacers and mounting hardware
• MAINTENANCE-FREE BUSHINGS — Adjustable control arms and track bars feature Rancho’s D2 high-articulation, grease-free bushings that allow the sleeve to rotate in the bushing without resistance to reduce wear
• SUPERIOR PERFORMANCE — Front and rear progressive rate coil springs are specifically tuned to provide superior on-road comfort and off-road performance and complies with NHTSA FMVSS126 standards
• ENGINEERED TO LAST — Brackets fabricated from high-strength, low-alloy steel for long life and bolt-on design for easy installation
• REQUIREMENTS — Rancho exhaust cross over pipe (RS720003) or DynoMax® exhaust cross over pipe (88347) is required for 2012-2018 models when not replacing the front driveshaft, sold separately
• NOTES — Tire size varies between manufacturers, aftermarket bumpers, sliders, winches, etc. affect height

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Metal And Rubber Construction
• Meets Quality Standards
• Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
• Easy To Install

Product Features:

• Incredible Improvement in Control
• Maintains Proper Caster and Camber Alignment
• Increase in Handling and Control
• Greatly Reduce Wheel Hop on Quick Acceleration
• Even Braking Control is Improved
• Better Suspension Stability

Whether its replacing deteriorated original units, to compensate loading one side of a vehicle common to 4×4 or looking to obtain that preferred ride height setting Whiteline spring pads are an economical solution.

Product Features:

• Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Upper
• Metal Outer Rubber Inner
• OE Style
• Direct Fit
• Limited 5 Year Warranty

Control Arm