Name: Differential Carrier Shim Kit
Brand: Motive Gear
SKU: GM9.5SSK
Price: 21.99 USD

from

$21.99

Product Features:

KIT SHIM SIDE 9.5″ GM

from

$31.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$2.99

Product Features:

CRUSH SLEEVE 9.5 GM 14BLT MIN ORDER 1000

from

$429.99

Yukon 4340 cut to length shaft for GM 14T & 11.5″, 30 spline, 34.8″-38.8″. Yukon 4340 Chrome Moly alloy axles offer a strength increase over stock while retaining a low cost. Yukon 4340 Chrome Moly alloy rear axles come with a limited lifetime warranty against manufacturing defects. Please verify bolt pattern on 2011 & later models. This axle has a 3.562″ bolt pattern. Some late model applcaitons use a larger bolt pattern.

Product Features:

Fits GM 10.5″ 14 bolt truck and GM 11.5″
4340 Chromoly
30 spline
Cut to length design fits 34.8″-38.8″ applications

from

$40.99

Product Features:

Side gear spacer sleeve
Fits GM 9.25″ IFS

from

$499.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits GM 9.25″ front
9.25″ ring gear
30 spline pinion
12 ring gear bolts
5.38 ratio

from

$319.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits GM 9.25″ IFS
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$215.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits HM88610 race
All steel construction

from

$304.99

Yukon 1480 Lifetime Series U/Joint. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.

Product Features:

Clutch kit
Fits GM 10.5″ 14 bolt truck with Eaton positraction
Carbon fiber clutches

from

$23.99

Product Features:

Cross pin bolt
Fits GM 9.5″ and 9.25″ IFS

from

$5.99

Differential Cover B

from

$14.99

Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

Product Features:

Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.

from

$137.90

Differential Bearing

from

$79.99

Product Features:

MINI INSTALL KIT-GM9.5/CHRY9.25 FRT

from

$48.99

10.5″ GM 14 bolt truck pinion nut. 1 1/2″ socket, 15/16″ x 16 thread.

Product Features:

Pinion nut for GM 10.5″ 14 bolt truck
15/16″ x 16 thread
1.5″ socket

from

$11.99

10.5″ GM 14 bolt truck ring gear bolt 4.56 & up. 9/16″ x 18. 2.522″ overall length.

Product Features:

Ring gear bolt for GM 10.5″ 14 bolt truck
4.56 and up ratio
1/2″ x 18 thread
2.522″ overall length

from

$22.99

Product Features:

KIT SHIM GM 10.5 14 BLT

from

$111.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:

Fits GM 9.25″ IFS
Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

from

$98.99

Left hand carrier bearing adjuster for 9.25″ GM IFS.

Product Features:

Side adjuster
Fits 2010 and down GM 9.25″ IFS
Left hand side

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$1110.00

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:

Fits GM 10.5″ 14 bolt truck
4.10 ratio and down only
Clutch style positraction
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

from

$1487.99

The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years. This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

Product Features:

Fits Dana Spicer 60 with 35 spline axles
4.10 and down ratio only
Forged case and 8620 internals for added strength
Works with a variety of air delivery systems
Assembled in the USA

from

$50.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$28.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$362.99

Eaton-type 14 plate Carbon clutch set for 9.5″ GM and 9.75″ Ford.

Product Features:

Clutch kit
Fits GM 9.5″ with Eaton positraction
Carbon fiber clutches

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$191.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

GM 9.25IFS MASTER KIT ’98-ON NO CAGED NEEDLES

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications