Name: Fuel Pump Flow Control Module
Brand: GM Genuine Parts
SKU: 20898936
Price: 151.99 USD

from

$151.99

GM Genuine Parts Fuel Pump Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules help relay power to your vehicle’s fuel pump. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Helps power the fuel pump
Helps your vehicle to idle smoothly
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$195.99

If your GM vehicle starts hard, stalls or is running poorly, it could be because of a failing fuel pump driver module. But when the factory module fails on select models, the dealership’s replacement part requires expensive calibration and programming. This time-saving Dorman OE FIX replacement is pre-programmed for an easier and more predictable installation. It also features a thermal- and vibration-tested backing plate for greater resistance to corrosion, and upgraded active electronic components for added reliability.

Product Features:

Pre-programmed replacement – this fuel pump driver module for GM vehicles directly replaces the original and requires no programming for installation
Upgraded design – module features enhanced microcontroller and new active electronic components for added reliability
Durable construction – module housing is thermal- and vibration-tested, with a powder-coated aluminum backing plate for corrosion resistance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$194.99

If your GM vehicle starts hard, stalls or is running poorly, it could be because of a failing fuel pump driver module. But when the factory module fails on select models, the dealership’s replacement part requires expensive calibration and programming. This time-saving Dorman OE FIX replacement is pre-programmed for an easier and more predictable installation. It also features a thermal- and vibration-tested backing plate for greater resistance to corrosion, and upgraded active electronic components for added reliability.

Product Features:

Pre-programmed replacement – this fuel pump driver module for GM vehicles directly replaces the original and requires no programming for installation
Upgraded design – module features enhanced microcontroller and new active electronic components for added reliability
Durable construction – module housing is thermal- and vibration-tested, with a powder-coated aluminum backing plate for corrosion resistance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$219.99

If your GM vehicle starts hard, stalls or is running poorly, it could be because of a failing fuel pump driver module. But when the factory module fails on select models, the dealership’s replacement part requires expensive calibration and programming. This time-saving Dorman OE FIX replacement is pre-programmed for an easier and more predictable installation. It also features a thermal- and vibration-tested backing plate for greater resistance to corrosion, and upgraded active electronic components for added reliability.

Product Features:

Pre-programmed replacement – this fuel pump driver module for GM vehicles directly replaces the original and requires no programming for installation
Upgraded design – module features enhanced microcontroller and new active electronic components for added reliability
Durable construction – module housing is thermal- and vibration-tested, with a powder-coated aluminum backing plate for corrosion resistance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$15.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$39.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$108.99

CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Triple barb hose fitting provides superior, long-lasting seal
Superior return porting for optimum fuel flow
Enhanced pump to flange harness design provides worry-free electrical performance
Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
Gradient density, dual zone filtration designed for better contamination resistance

from

$461.99

GM Genuine Parts Fuel Pump Module Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These module assemblies help deliver fuel to your vehicle’s fuel injectors, providing a steady, reliable fuel supply to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a reliable fuel supply to your vehicle’s engine
Electrical connections are designed to help eliminate high resistance due to vehicle vibration
Designed to optimize pump life and reduce fuel pump noise
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$311.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$452.51

Fuel modules are designed to provide uninterrupted flow of fuel to the engine at system pressure. Depending on customer needs, the Delphi Series 7000 Fuel Module can integrate a pump, fuel level sensor, fuel filter, reservoir with active and passive filling mechanisms, and regulator in a compact, modular package that is easy to install. The Delphi Series 7000 Fuel Module also offers an in-tank fuel filter with 10-12 µm filtration. The Delphi Series 7000 Fuel Module provides superior low fuel handling and fuel level sensing performance with its enhanced bottom reference design. It also offers reduced noise levels and improved pump durability compared to conventional fuel modules. The simplicity of design also results in lower cost. This module is targeted to meet California ZEV requirements.

Product Features:

Acetal cover can accommodate 116mm tank opening to permit integrated filter in reservoir
Single stage turbine pump provides quiet, energy efficient operation
Active reservoir-fill mechanism (high pressure jet pump) to maintain fuel supply in reservoir
Passive reservoir fill mechanism helps fill the reservoir at low-fuel volumes
High capacity filter media helps supply clean fuel to the injection system
Available serviceable in-tank fuel filter for markets with poor quality fuels

from

$411.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$449.99

GM Genuine Parts Fuel Pump Module Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These module assemblies help deliver fuel to your vehicle’s fuel injectors, providing a steady, reliable fuel supply to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a reliable fuel supply to your vehicle’s engine
Electrical connections are designed to help eliminate high resistance due to vehicle vibration
Designed to optimize pump life and reduce fuel pump noise
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$166.99

Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$249.99

Fuel Pump Driver Module

from

$164.99

Fuel Pump Driver Module

from

$152.99

Fuel Pump Driver Module

from

$158.99

GM Genuine Parts Fuel Pump Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules help relay power to your vehicle’s fuel pump. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Helps power the fuel pump
Helps your vehicle to idle smoothly
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$618.37

The ACDelco GM Original Equipment Fuel Pump Control Module regulates the voltage supply to the electric fuel pump, and is a GM-recommended replacement for your vehicle’s original component. The control module receives an electrical signal from the engine control module that determines the voltage applied to the pump – this alters the pump motor speed and fuel pressure. This original equipment fuel pump control module has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$286.60

The ACDelco GM Original Equipment Fuel Pump Driver Module is a GM-recommended replacement for your vehicle’s original component. The Fuel Pump Driver Module is used on modern return-less fuel supply systems, where the fuel pump output is regulated based on engine speed and load. These modules control the voltage delivered to the vehicle’s fuel pump, regulating the fuel pump’s speed. This helps to maintain the optimum fuel pressure and fuel delivery to the engine throughout its full operating range. This original equipment module has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory fuel pump driver module
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$189.99

GM Genuine Parts Fuel Pump Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules help relay power to your vehicle’s fuel pump. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Helps power the fuel pump
Helps your vehicle to idle smoothly
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$49.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$52.99

This fuel sender connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel sender connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience