2007 Chevrolet Suburban 1500 Fuel Pumps

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

The ACDelco GM Original Equipment Fuel Pump Driver Module is a GM-recommended replacement for your vehicle’s original component. The Fuel Pump Driver Module is used on modern return-less fuel supply systems, where the fuel pump output is regulated based on engine speed and load. These modules control the voltage delivered to the vehicle’s fuel pump, regulating the fuel pump’s speed. This helps to maintain the optimum fuel pressure and fuel delivery to the engine throughout its full operating range. This original equipment module has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• GM-recommended replacement part for your GM vehicle’s original factory fuel pump driver module
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

GM Genuine Parts Fuel Pump Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules help relay power to your vehicle’s fuel pump. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Helps power the fuel pump
• Helps your vehicle to idle smoothly
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

The ACDelco GM Original Equipment Fuel Pump Control Module regulates the voltage supply to the electric fuel pump, and is a GM-recommended replacement for your vehicle’s original component. The control module receives an electrical signal from the engine control module that determines the voltage applied to the pump – this alters the pump motor speed and fuel pressure. This original equipment fuel pump control module has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Fuel Pump Driver Module

Fuel Pump Driver Module

Fuel Pump Driver Module

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

• BAR Certified adapters
• Adapter check’s a fuel cap’s ability to hold pressure.
• Adapters meet EPA standards for recommended fleet coverage.
• Check adapter application chart for specific makes and models

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

• BAR Certified adapters
• Adapter check’s a fuel cap’s ability to hold pressure.
• Adapters meet EPA standards for recommended fleet coverage.
• Check adapter application chart for specific makes and models

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

• BAR Certified adapters
• Adapter check’s a fuel cap’s ability to hold pressure.
• Adapters meet EPA standards for recommended fleet coverage.
• Check adapter application chart for specific makes and models

This fuel sender connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this fuel sender connector matches the appearance and function of the factory hardware on specified applications
• Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

GM Genuine Parts Fuel Pump Module Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These module assemblies help deliver fuel to your vehicle’s fuel injectors, providing a steady, reliable fuel supply to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Helps provide a reliable fuel supply to your vehicle’s engine
• Electrical connections are designed to help eliminate high resistance due to vehicle vibration
• Designed to optimize pump life and reduce fuel pump noise
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

• Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
• Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
• Lower amperage draws less load on vehicle’s electrical system
• Part is validated, tested and matched to the right vehicle application
• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Lower failure rates due to its innovative design and durability

Fuel Pump Assembly

Fuel modules are designed to provide uninterrupted flow of fuel to the engine at system pressure. Depending on customer needs, the Delphi Series 7000 Fuel Module can integrate a pump, fuel level sensor, fuel filter, reservoir with active and passive filling mechanisms, and regulator in a compact, modular package that is easy to install. The Delphi Series 7000 Fuel Module also offers an in-tank fuel filter with 10-12 µm filtration. The Delphi Series 7000 Fuel Module provides superior low fuel handling and fuel level sensing performance with its enhanced bottom reference design. It also offers reduced noise levels and improved pump durability compared to conventional fuel modules. The simplicity of design also results in lower cost. This module is targeted to meet California ZEV requirements.

Product Features:

• Acetal cover can accommodate 116mm tank opening to permit integrated filter in reservoir
• Single stage turbine pump provides quiet, energy efficient operation
• Active reservoir-fill mechanism (high pressure jet pump) to maintain fuel supply in reservoir
• Passive reservoir fill mechanism helps fill the reservoir at low-fuel volumes
• High capacity filter media helps supply clean fuel to the injection system
• Available serviceable in-tank fuel filter for markets with poor quality fuels

Continental fuel modules are a genuine OEM part. They are identical in fit, form, and function and provide the genuine quality of OE components supplied to auto manufacturers worldwide. Professional technicians and DIYers alike want quality products for ease of installation, fit, and performance. Continental fuel modules are designed for long service life and simplified installation. They are built in OE ISO TS certified facilities and manufactured to the highest quality standards. They offer dependable performance and robust design by being a genuine OEM part while still maintaining a competitive price.

GM Genuine Parts Fuel Pump Module Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These module assemblies help deliver fuel to your vehicle’s fuel injectors, providing a steady, reliable fuel supply to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Helps provide a reliable fuel supply to your vehicle’s engine
• Electrical connections are designed to help eliminate high resistance due to vehicle vibration
• Designed to optimize pump life and reduce fuel pump noise
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

The Denso Electric Fuel Pump Assembly is built to meet the stringent requirements of carmakers for high output, extended reliability and reduced noise.

Product Features:

• OE-Equivalent and direct fit for easy installation
• OE connections and fittings
• The high output turbine delivers fuel with minimal pressure pulsation for quieter operation
• Ultra-high balanced armature to minimize noise and vibration
• High pressure check valve provides superior hot fuel handling characteristics
• The brushes are designed for durability, efficiency, and low-resistance operation
• High quality relief valve to protect the fuel delivery system

Fuel Pump and Level Sensor Module with Seals

Product Features:

• Helps provide a reliable fuel supply to your vehicle’s engine
• Electrical connections are designed to help eliminate high resistance due to vehicle vibration
• Designed to optimize pump life and reduce fuel pump noise
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

The ACDelco Electric Fuel Pump Assembly and their related components are designed to meet the highest standards in the industry. This helps to ensure their ability to provide impressive fuel delivery performance, quick engine starts and continuous fuel supply, minimum noise and vibration, long-lasting durability and easy installation and fit. The ACDelco Fuel Pump is manufactured in ISO-9001 and QS-9000 registered facilities, quality is assured and backed by competitive warranty coverage.

Product Features:

• Hybrid Modular Reservoir Assembly (MRA)
• Latest fuel level sensor design eliminates failures due to worn fingers on sensor wiper arm, sulfur contamination, wire wound sensors and lead sensor kits
• Improved electrical connections that eliminate below-cover burning due to vehicle vibration over previous designs
• Improved pump design to increase pump life and reduce pump noise over previous designs
• Pump changed from a roller vane design to a ge-rotor design
• The ACDelco fuel pump line includes: electric (in-line and in-tank), modular assemblies and mechanical pumps.

GM Genuine Parts Fuel Pump Module Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These module assemblies help deliver fuel to your vehicle’s fuel injectors, providing a steady, reliable fuel supply to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Helps provide a reliable fuel supply to your vehicle’s engine
• Electrical connections are designed to help eliminate high resistance due to vehicle vibration
• Designed to optimize pump life and reduce fuel pump noise
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

• Meets or exceeds OE specifications for fit, form and function
• 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
• OE upgraded turbine impellers greatly reduce fuel pulsation
• All fuel pumps are 100% performance tested
• Includes installation gaskets or seals where applicable

CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability.

Product Features:

• Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
• Triple barb hose fitting provides superior, long-lasting seal
• Superior return porting for optimum fuel flow
• Enhanced pump to flange harness design provides worry-free electrical performance
• Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
• Gradient density, dual zone filtration designed for better contamination resistance

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

• Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
• Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
• Lower amperage draws less load on vehicle’s electrical system
• Part is validated, tested and matched to the right vehicle application
• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Lower failure rates due to its innovative design and durability

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

• Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
• Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
• Lower amperage draws less load on vehicle’s electrical system
• Part is validated, tested and matched to the right vehicle application
• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Lower failure rates due to its innovative design and durability

CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability.

Product Features:

• Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
• Triple barb hose fitting provides superior, long-lasting seal
• Superior return porting for optimum fuel flow
• Enhanced pump to flange harness design provides worry-free electrical performance
• Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
• Gradient density, dual zone filtration designed for better contamination resistance

ACDelco Gold (Professional) Fuel Pump and Sender Assemblies are a high quality alternative to Original Equipment (OE) parts. A fuel pump and sender assembly is submerged inside of a fuel tank which is common among most electronic fuel-injected vehicles. This is comprised of a connector, pump body, and fuel lever sender. A connector is located near the top of the fuel tank, which is used to supply power and ground for the fuel pump and sensing wires of the fuel level sender. The pump body is where an electric motor is mounted to a small vein pump which picks up gas and then pressurizes the fuel system. The fuel level sender is attached to the fuel pump housing. This float rides on the fuel level while the sensing resistor provides feedback data for the fuel gauge. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

• Provides steady reliable fuel supply
• Supplies precise measurement of fuel levels in tank
• Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
• Premium aftermarket replacement part
• Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability.

Product Features:

• Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
• Triple barb hose fitting provides superior, long-lasting seal
• Superior return porting for optimum fuel flow
• Enhanced pump to flange harness design provides worry-free electrical performance
• Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
• Gradient density, dual zone filtration designed for better contamination resistance