2011 Chevrolet Silverado 2500 HD Ignition and Tune-Up Products

Essential 2011 Chevrolet Silverado 2500 HD Ignition and Tune-Up Products

Delphi – Ignition Coil (Part No.GN10165)

Ignition Coil

from

$91.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

Carquest Premium – Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit (Part No.35-8159)

Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit

from

$63.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Dorman – Cabin Air Filter Standard Kit (Part No.259-200)

Cabin Air Filter Standard Kit

from

$68.99
This cabin air filter retrofit kit is designed to match the original filter that is required to restore proper cabin airflow on specified vehicles. Made of quality materials, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this cabin air filter retrofit kit is designed to match the original filter required to restore proper cabin airflow on specified vehicles
  • Ideal solution – this kit is a reliable replacement for the original filter that is clogged or has failed
  • Durable construction – this kit is made from quality materials to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

DENSO – Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, ZTJ16VR10 (Part No.3539)

Iridium Long-Life Spark Plug:  OE Performance, last 100K+ Miles, ZTJ16VR10

from

$9.99
Manufactured to the strictest OE performance, durability and emissions standards.

Product Features:
  • Latest OE technology with DENSO’s patented Iridium Alloy (90% Ir) and fine wire center electrode
  • Platinum ground electrode for extended life
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Sustained spark performance over 100,000 miles
  • Lasts up to three times as long as conventional plugs
  • Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
  • Iridium Long Life
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA3065)

Ignition Coil Connector

from

$119.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Gray Multi-Purpose Pigtail (Part No.PT2655)

Gray Multi-Purpose Pigtail

from

$72.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest – Cornering Light Socket (Part No.PT189)

Cornering Light Socket

from

$23.29
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
  • Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
  • Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
  • High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
  • Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C
See More

Carquest Premium – Engine Crankshaft Position Sensor Connector (Part No.PTA1136)

Engine Crankshaft Position Sensor Connector

from

$69.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

GM Genuine Parts – Fuel Injection Fuel Rail Bolt (Part No.12554211)

Fuel Injection Fuel Rail Bolt

from

$9.99
GM Genuine Parts Studs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3654)

Ignition Knock (Detonation) Sensor

from

$57.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Delphi – Knock Sensor (Part No.AS10261)

Knock Sensor

from

$21.99
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Product Features:
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

Carquest Premium – Diesel Glow Plug Controller (Part No.RAC1811)

Diesel Glow Plug Controller

from

$173.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Glow Plug Control Mo (Part No.F1105780001ACD)

Glow Plug Control Mo

from

$410.16
Glow Plug Control Mo

ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9748GG)

Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core

from

$102.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8343)

Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit

from

$70.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

MSD Ignition – Coils; GM L-Series Truck 99-09; 8-Pack (Part No.82648)

Coils; GM L-Series Truck 99-09; 8-Pack

from

$499.99
Looking to replace your worn out LS coils with a more efficient upgrade? The new MSD Blaster LS Coil line is ideal for your modern GM muscle car or truck. The coils are designed as a bolt-in replacement yet have been thoroughly tested and detailed by our experienced engineering team. The improved efficiency of these Blaster Coils will give your LS the ignition boost you’re looking for.

Product Features:
  • Replacement Coil
  • Full One Year Warranty
See More

MSD Ignition – Blaster LS Coils for 05-13 GM LS2/3/4/7/9 Engines (8-Pack) (Part No.82658)

Blaster LS Coils for 05-13 GM LS2/3/4/7/9 Engines (8-Pack)

from

$549.99
Looking to replace your worn out LS coils with a more efficient upgrade? The new MSD Blaster LS Coil line is ideal for your modern GM muscle car or truck. The coils are designed as a bolt-in replacement yet have been thoroughly tested and detailed by our experienced engineering team. The improved efficiency of these Blaster Coils will give your LS the ignition boost you’re looking for.

Product Features:
  • Replacement Coil
  • Full One Year Warranty
See More

ACDelco – Spark Plug Wire (Part No.357D)

Spark Plug Wire

from

$31.99
ACDelco GM Original Equipment Spark Plug Wires consist of a single wire, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Durable to help transfer high voltage pulses without damage
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – Original Equipment Ignition Wire (Part No.F1030575906ACD)

Original Equipment Ignition Wire

from

$22.14
Built to match the original equipment in length and fit, ACDelco OES Ignition Wires offer a performance advantage over many aftermarket products.

Product Features:
  • ACDelco ignition wires are designed to be like Original in critical areas such as cable length and diameter, terminal design and insulator position
  • Have broad coverage available for most vehicles on the road today from 1980 to present
  • Provide a high degree of Radio Frequency Interference (RFI) suppression
  • Are designed to offer fit, form and function for optimum performance
  • Kevlar reinforced fiberglass core in select sets for increased strength
  • Core sheathed in radio-static absorbent material for increased RFI suppression
  • Wire-wound, stainless steel alloy conductor for maximum spark delivery and RFI suppression on most applications
  • A layer of conductive heat-resistant latex for added durability
  • Insulating rubber-based compound inner jacket helps minimize voltage drop and enhance durability
  • Thick silicone outer jacket for excellent heat resistance
  • Limited lifetime warranty*
See More

GM Genuine Parts – Glow Plug (Part No.63G)

Glow Plug

from

$23.99
GM Genuine Parts Diesel Glow Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Beru – High Tech Type GE & GN Glow Plugs (Part No.F1100225345BER)

High Tech Type GE & GN Glow Plugs

from

$27.16
High-tech glow plugs, pre-start and post-glowing (type GE, type GN) Diesel starting is now quicker, more reliable and more environmentally friendly. BERU is one of the leading manufacturers of glow plugs in the world – and inventor of numerous innovations in Diesel cold start technology The latest diesel car engines are equipped with the innovative three-phase glow technology (pre-heating – heating during starting – post-heating). This means: the glow plug not only heats prior to and during the starting phase, but also up to 180 seconds after starting. This protects the environment and the engine. BERU offers 3-phase glow plugs of the GE and GN type. GE and GN glow plugs in 2-coil technology have not only a heating coil to maintain the optimal heating temperature, but also have a regulator coil that effectively protects the glow plug from overheating. In this way BERU glow plugs are extremely reliable and durable. The GE glow plug is a performance-optimized, controlled glow plug used in engines of the latest generations. The fast heating of the glow plug and the controlled operation are provided by a programmable micro-controller in the glow time control unit.

Product Features:
  • Super quick start glow plugs in new, slim shape
  • Extremely short pre-heating time: from 2 seconds
  • Reliable starting (even at -30C)
  • Can be used for post-heating, as a result environmentally friendly: up to 40% less pollutant emissions during the warm up phase
  • No more cold start knocking
  • Quieter engine running
  • Protects the engine during starting
See More

ACDelco – Professional Glow Plug (Part No.F1100225389ACD)

Professional Glow Plug

from

$38.95
ACDelco’s Professional Glow Plugs meet a wide range of vehicle applications and budgets, making them the perfect choice when it is time to replace your Glow plugs.

Product Features:
  • Designed to give diesel engines the heat they need for cold starts
  • The ACDelco Professional Glow Plugs can function under higher voltages than other glow plugs
  • GN-type regulating coil
  • Self-regulating to control electrical flow from battery as temperatures rise to avoid overheating
  • Full range of reaches – from 21mm to 40mm – to meet chamber requirements in a wide variety of applications
See More

DENSO – Spark Plug Wire Set: Aluminum Steel Core, 8 Wire Set (Part No.671-8063)

Spark Plug Wire Set: Aluminum Steel Core, 8 Wire Set

from

$95.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8158)

Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit

from

$73.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9748RR)

Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core

from

$92.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest – Ignition Switch (Part No.CS1107)

Ignition Switch

from

$42.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Copper alloy conductors ensure superior electrical conductivity with low resistive losses
  • Our parts are 100% tested to verify both mechanical and electrical switching performance
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Ignition Switch (Part No.CSC1304)

Ignition Switch

from

$109.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

GM Genuine Parts – Ignition Switch (Part No.D1485F)

Ignition Switch

from

$51.99
GM Genuine Parts Ignition Starter are designed, engineered, and tested to rigorous standards, and are backed by General Motors. It is a multi-position switch that activates the ignition, accessory, and cranking circuits in your vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Work with vehicle electronics to help optimize vehicle capabilities
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

2011 Chevrolet Silverado 2500 HD Ignition and Tune-Up Products

You count on your 2011 Chevrolet Silverado 2500 HD to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 65 Ignition and Tune-Up Products ranging in price from $2.99 to $628.99, you’re sure to find everything you need for your 2011 Chevrolet Silverado 2500 HD.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 16 different brands like ACDelco, NGK, and DENSO. 2011 Chevrolet Silverado 2500 HD Ignition and Tune-Up Products start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 4,584 extensive product reviews on 2011 Chevrolet Silverado 2500 HD Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit with 4.6 stars and Iridium IX Spark Plug: Single Iridium Fine Wire, TR5IX with 4.6 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2011 Chevrolet Silverado 2500 HD below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 2011 Chevrolet Silverado 2500 HD

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2011 Chevrolet Silverado 2500 HD running right for years to come. In our inventory you’ll find brands like ACDelco, NGK, DENSO, and even more.

Popular Dorman Ignition and Tune-Up Products

You’ll find popular Dorman brand products across Ignition Kits. All are waiting to get your 2011 Chevrolet Silverado 2500 HD back on the road. Some of the top-rated Dorman products in these categories are:
Cabin Air Filter Standard Kit
from $68.99
(1)
Cabin Air Filter Standard Kit
Cabin Air Filter Retrofit Kits
Cabin Air Filter Carbon Kit
from $66.99
(3)
Cabin Air Filter Carbon Kit
Cabin Air Filter Retrofit Kits

Top-Rated DENSO Ignition and Tune-Up Products


If DENSO are what you’re looking for, our inventory holds plenty. We stock DENSO brand Ignition and Tune-Up Products for your 2011 Chevrolet Silverado 2500 HD, and some of our most reviewed DENSO parts include:
PT16TT Platinum TT Spark Plug
from $5.99
(90)
PT16TT Platinum TT Spark Plug
Spark Plugs

FAQs for 2011 Chevrolet Silverado 2500 HD Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 2011 Chevrolet Silverado 2500 HD?

Out of 65 Ignition and Tune-Up Products for the 2011 Chevrolet Silverado 2500 HD, the most popular in our inventory are:
Iridium Spark Plug: Original Equipment Replacement
from $11.99
This product is not rated
Iridium Spark Plug: Original Equipment Replacement
Spark Plugs

What are the top-rated 2011 Chevrolet Silverado 2500 HD Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 2011 Chevrolet Silverado 2500 HD based on customer reviews/ratings are:
Iridium IX Spark Plug: Single Iridium Fine Wire, TR5IX
from $11.99
(74)
Iridium IX Spark Plug: Single Iridium Fine Wire, TR5IX
“The Young Man who helped me was very helpful”