2011 Chevrolet Silverado 2500 HD Brake Parts

Essential 2011 Chevrolet Silverado 2500 HD Brake Parts

GM Genuine Parts – Rear Disc Brake Pad Set with Clips, Boots, and Caps (Part No.171-1024)

Rear Disc Brake Pad Set with Clips, Boots, and Caps

from

$163.99
GM Genuine Parts Disc Brake Pads are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Disc Brake Pads are the friction material used in disc brakes that press against the brake rotor to stop the vehicle. This friction-enhancing material is bonded and/or riveted to steel backing plates. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Integrally molded – friction material molded to backing plate for bond integrity
  • Premium shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

PowerStop – Front And Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z36 Truck And Tow (Part No.K4423-36)

Front And Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z36 Truck And Tow

from

$580.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z36 Truck & Tow Brake Upgrade Kit is recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well. This brake pad and rotor kit comes with everything you need, including premium stainless-steel hardware, for an easy, bolt-on installation. The low-dust Ceramic brake pads are reinforced with Carbon-Fiber to provide severe-duty stopping power without sacrificing everyday drivability. These pads are paired with Drilled & Slotted rotors that keep brake temperatures down by maximizing heat dissipation, critical for those long mountain descents. Whether towing a boat or trailer, hauling for the jobsite, or tackling a tough off-road trail, get the easy and affordable, bolt-on performance upgrade with the Z36 Truck & Tow Brake Upgrade Kit.

Product Features:
  • This complete brake kit has been engineered to handle the added stress of towing, hauling, mountainous driving and lifted trucks
  • Proprietary Carbon-Fiber Ceramic Z36 brake pads enhance the strength of a typical ceramic brake pad compound to handle heavier loads
  • Stainless-steel pad shims resist the increased temperatures common on heavy duty applications
  • Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
  • Drilled & Slotted performance rotors provide maximum cooling
  • Bolt-on upgrade for stock brakes, no modifications necessary
  • Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
  • Rotors are zinc plated for maximum protection against rust.
  • Brake rotors, pads & hardware engineered to work together to increase the overall braking power on vehicles with heavier loads
  • Buy with confidence from the originator & industry leader of brake kits
See More

Carquest Wearever – Inlet Bolt (sold by each) (Part No.301H5375)

Inlet Bolt (sold by each)

from

$1.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Banjo Bolts allow the brake fluid to transfer

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured with quality materials to suppress high stress levels
  • Corrosion resistant coating for long-lasting durability against harsh roads
See More

Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.18-B4730)

Semi Loaded Disc Brake Caliper with Bracket

from

$71.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • 100% new phenolic pistons for improved resistance to heat transfer and miles of worry-free operation in all conditions
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • 100% new phenolic pistons for improved resistance to heat transfer and miles of worry-free operation in all conditions
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Dorman – Help – Brake Master Cylinder Gasket (Part No.42072)

Brake Master Cylinder Gasket

from

$9.99
This brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles
  • Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

PowerStop – Red Powder Coated Calipers (Part No.S4728)

Red Powder Coated Calipers

from

$213.99
PowerStop Performance Brake Calipers are made specifically with the enthusiast in mind. These calipers bolt directly in place of the stock calipers, and they look and perform great behind stock or custom wheels. PowerStop calipers and the brackets are remanufactured in our Chicago, IL facility and treated with a electrostatic high-temperature red powder-coating. The easy to clean powder coating helps to resist rust and corrosion thus extending the life of your calipers. PowerStop calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This insures that every caliper is inspected for quality and safety. PowerStop caliper pairs are expertly assembled using new seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. The performance color is a nice touch that really stands out behind your wheels!

Product Features:
  • All calipers are thoroughly inspected for quality and safety. Pressure tested to prevent leaks.
  • New seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets
  • High temperature EPDM rubber for extended life.
  • Premium silicone lubrication provides smoother operation.
  • The easy to clean powder coating helps to resist rust and corrosion and extends the life of calipers.
See More

Wearever – Hydraulic Booster – Domestic Unloaded (Part No.52-7371)

Hydraulic Booster - Domestic Unloaded

from

$259.99
Prior Automotive Remanufactured Brake Boosters offer elite performance and reliable stopping power whenever and wherever you need it. Prior Automotive is renowned in the Remanufacturing industry for quality. Since Prior’s early days as a rebuilder, its attention to detail and obsession with quality has made the Prior name special. We are even able to improve upon the original engineering of many brake boosters! From quality control protocols, proprietary engineering methods not duplicated by any other remanufacturer, assembly, all the way to packaging – NO ONE DOES IT QUITE LIKE PRIOR!

Product Features:
  • Every remanufactured unit is inspected and tested to meet or exceed original vehicle performance specifications
  • 100% new seals, O-rings, and critical wear parts replaced
  • Preventative anti-rust solution used to increase life of every booster
  • O.E. quality diaphragms and check-valves
  • Extreme resistance to wear
  • Proprietary assembly techniques
  • Over 60 years of remanufacturing experience
See More

Carquest Frontline – Severe Duty Brake Pads Both, With Hardware, Ideal For Heavy Towing And Hauling (Part No.FLD785)

Severe Duty Brake Pads Both, With Hardware, Ideal For Heavy Towing And Hauling

from

$70.99
Providing maximum braking performance on towing, heavy hauling, and frequent braking applications, Carquest Frontline Severe Duty brake pads are the ideal choice for severe duty applications.

Product Features:
  • Severe duty friction formulations dissipate heat faster for extended pad life
  • On-vehicle testing similar to original equipment tests
  • Patented 4-Layer HEX Shim Technology provides quiet braking
  • HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
  • PTFE coated hardware and caliper pin grease included for nearly every application
  • Powder-coated backing plate prevents corrosion
See More

GM Genuine Parts – Parking Brake Switch (Part No.15045983)

Parking Brake Switch

from

$6.29
GM Genuine Parts Parking Brake Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.18-B5306)

Semi Loaded Disc Brake Caliper with Bracket

from

$99.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • 100% new phenolic pistons for improved resistance to heat transfer and miles of worry-free operation in all conditions
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • 100% new phenolic pistons for improved resistance to heat transfer and miles of worry-free operation in all conditions
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

Carquest Premium – Engine Camshaft Position Sensor Connector (Part No.PTA1226)

Engine Camshaft Position Sensor Connector

from

$40.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Wearever – Disc Brake Caliper Bracket Mounting Bolt (Part No.H801)

Disc Brake Caliper Bracket Mounting Bolt

from

$4.29
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Mounting Bolts sets provide direct re

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured with quality materials to suppress high stress levels
  • Prevents noise and premature wear
  • Corrosion resistant coating for long-lasting durability against harsh roads
See More

Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH317206)

Disc Brake Rotor Meets or Exceeds OE Design

from

$178.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
See More

Carquest Premium – Brake Fluid Level Sensor (Part No.SBA3681)

Brake Fluid Level Sensor

from

$13.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14249)

Disc Brake Caliper Guide Pin Kit

from

$20.79
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
See More

ACDelco – Multi-Purpose Relay (Part No.D1741C)

Multi-Purpose Relay

from

$29.99
ACDelco Professional Temperature Control Relay is a high quality aftermarket replacement component for one or more of the following vehicle systems: HVAC. This premium aftermarket relay is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.16199)

Disc Brake Caliper Guide Pin Boot Kit

from

$10.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Prevents noise and premature wear
See More

Carquest Wearever – Parking Brake Hardware Kit (Part No.H7311)

Parking Brake Hardware Kit

from

$29.49
Brakes are designed as a system and all the parts need to work together for best performance. Parking brakes hold the vehicle in place when the vehicle is parked. Because the parking brake is so important, you want to be sure all it’s hardware and components are in good shape.

Product Features:
  • Contains all the necessary hardware for easy installation
  • Direct replacement for a perfect fit, form and function
  • Corrosion resistant for long-lasting durability against harsh roads
  • Manufactured with quality materials to restrain high tolerances
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-3331)

Remanufactured Brake Master Cylinder

from

$84.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Dorman – Body Bolt M6-1.0 x 25mm (Part No.963-232)

Body Bolt M6-1.0 x 25mm

from

$3.79
These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

Product Features:
  • Durable materials – manufactured to specific thread tolerance standards
  • Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
  • Multipurpose usefulness – can be used in a variety of applications, from auto to home
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

ACDelco – Ceramic Front Disc Brake Pad Set with Hardware (Part No.14D784CH)

Ceramic Front Disc Brake Pad Set with Hardware

from

$64.99
ACDelco Silver (Advantage) Ceramic Disc Brake Pads are a quality, high value alternative for General Motors vehicles as well as most makes and models and are backed by General Motors. These brake pads have a ceramic formulation that uses less metal, providing quality braking power in a quiet and low-dusting package. Also, hardware clip kits are included where applicable. ACDelco Silver (Advantage) Ceramic Disc Brake Pads are available for all makes and models. ACDelco Silver (Advantage) parts are a good choice for many vehicles on the road today. Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage.

Product Features:
  • Ceramic, Semi-Metallic, and Organic formulas provide safety and reliability for a range of vehicle applications
  • Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
  • No curing or machining required, ready to be installed right out of the box
  • Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage
  • Economical value with dependable quality
  • For General Motors vehicles as well as most makes and models
See More

Carquest Wearever – Parking Brake Cable (Part No.BCA660200)

Parking Brake Cable

from

$40.49
This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
  • Quality design – inner cables are sheathed and lubricated to provide improved durability
  • Long-lasting construction – flexible casings are completely covered with conduit to prevent wear and tear of interior cables
  • Tough materials – zinc-plated fittings prevent corrosion
See More

Driveworks – Electrical Relay (Part No.83267)

Electrical Relay

from

$15.79
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

PowerStop – Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K5190)

Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver

from

$269.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:
  • This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
  • PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
  • Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Drilled & Slotted performance rotors provide maximum cooling
  • Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
  • Bolt-on upgrade for stock brakes, no modifications necessary
  • Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
  • Rotors are zinc plated for maximum protection against rust.
  • Buy with confidence from the originator & industry leader of brake kits
See More

Carquest Frontline – Brake Rotor G09465SD: Rear, Designed for Severe-Duty Performance (Part No.G09465SD)

Brake Rotor G09465SD: Rear, Designed for Severe-Duty Performance

from

$203.99
Carquest Frontline brake rotors are manufactured to withstand severe-duty use, making them the ideal choice for police, emergency vehicles, fleet and severe duty applications. Machined, balanced and with more carbon content, Frontline severe-duty castings meet or exceed original equipment specifications, delivering better stopping power, superior heat dissipation, and high tensile strength. Carquest Frontline rotors are fully coated to protect against corrosion and rust build-up, which can shorten rotor life. These rotors are the preferred choice when looking for the best performance on severe-duty applications.Tech Tip: Burnish the pads to the rotor by applying the 30/30/30 rule: 30 stops from 30 mph with 30 seconds of cool down between stops.

Product Features:
  • Designed for severe duty performance
  • Coating promotes unrestricted heat venting by preventing rust and corrosion build-up
  • Manufactured to exact quality and dimensional specifications for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Optimal metallurgy and casting thickness to preventing warping
  • OE vane configuration to dissipate heat and increase pad life
  • Proper harmonic design helps to reduce brake noise
See More

ACDelco – Black Multi-Purpose Pigtail (Part No.PT2629)

Black Multi-Purpose Pigtail

from

$35.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

GM Genuine Parts – Parking Brake Shoe Lining Kit (Part No.171-0930)

Parking Brake Shoe Lining Kit

from

$47.49
GM Genuine Parts Parking Brake Shoes are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Parking brake shoes are curved friction material used in parking brakes. The friction-enhancing material is bonded and/or riveted to a steel backing.GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Rust-preventive coating to help protect against corrosion
  • Equipped with GM OE fit; no retrofitting is required
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

2011 Chevrolet Silverado 2500 HD Brake Parts

You count on your 2011 Chevrolet Silverado 2500 HD to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 87 Brake Parts ranging in price from $3.79 to $782.99, you’re sure to find everything you need for your 2011 Chevrolet Silverado 2500 HD.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 14 different brands like Carquest Premium, Carquest Platinum Painted, and Carquest. 2011 Chevrolet Silverado 2500 HD Brake Parts start as low as $3.79!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 2,844 extensive product reviews on 2011 Chevrolet Silverado 2500 HD Brake Parts. Some of the top-rated Brake Parts products we carry are Brake Hydraulic Hose with 4.0 stars and Ceramic Brake Pads – (4-Pad Set) with 4.5 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 2011 Chevrolet Silverado 2500 HD below to get started!

Top-Rated Brake Parts Brands For Your 2011 Chevrolet Silverado 2500 HD

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2011 Chevrolet Silverado 2500 HD running right for years to come. In our inventory you’ll find brands like Carquest Premium, Carquest Platinum Painted, Carquest, and even more.

Popular ACDelco Brake Parts

You’ll find popular ACDelco brand products across Brake Hydraulic Parts. All are waiting to get your 2011 Chevrolet Silverado 2500 HD back on the road. Some of the top-rated ACDelco products in these categories are:
Multi-Purpose Relay
from $29.99
(1)
Multi-Purpose Relay
Brake Pressure Relays

Top-Rated Dorman – Help Brake Parts


If Dorman – Help are what you’re looking for, our inventory holds plenty. We stock Dorman – Help brand Brake Parts for your 2011 Chevrolet Silverado 2500 HD, and some of our most reviewed Dorman – Help parts include:
Master Cylinder Caps
from $9.49
(22)
Master Cylinder Caps
Master Cylinder Caps and Gaskets
Brake Hose Bolts M10-1.5 X 22.8mm
from $8.49
(21)
Brake Hose Bolts M10-1.5 X 22.8mm
Brake Hose Bolts
Brake Master Cylinder Gasket
from $9.99
(15)
Brake Master Cylinder Gasket
Master Cylinder Caps and Gaskets

FAQs for 2011 Chevrolet Silverado 2500 HD Brake Parts

What are the most purchased Brake Parts for the 2011 Chevrolet Silverado 2500 HD?

Out of 87 Brake Parts for the 2011 Chevrolet Silverado 2500 HD, the most popular in our inventory are:
Brake Pads
from $64.99
(21)
Brake Pads
Front Brake Pads and Shoes

What are the top-rated 2011 Chevrolet Silverado 2500 HD Brake Parts?

Top-rated Brake Parts for your 2011 Chevrolet Silverado 2500 HD based on customer reviews/ratings are:
Brake Hydraulic Hose
from $45.99
(20)
Brake Hydraulic Hose
“Easy to install. Picture on the display is excellent! Camera is adjustable so you can see the hitch if you want to use it to align the trailer tongue.”
Ceramic Brake Pads - (4-Pad Set)
from $64.99
(17)
Ceramic Brake Pads – (4-Pad Set)
“Is good material specially in workings trucks”
Disc Brake Caliper Bracket Mounting Bolt
from $4.29
(14)
Disc Brake Caliper Bracket Mounting Bolt
“Perfect fit”