2011 Chevrolet Impala Transmission Parts

Name: GM Original Equipment Transmission Control Module- Remanufactured
Brand: ACDelco
SKU: J2503576976ACD
Price: 226.37 USD

Below you will find various in-demand Chevrolet Transmission Parts, components and accessories for your 2011 Impala. Advance Auto Parts has popular Impala parts like Transmission Seals, Transmission Mounts, Automatic Transmission Parts and more. You’ll also find aftermarket and OEM Transmission Parts for other Impala model years including 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 and more. Select a category of 2011 Chevrolet Impala Transmission Parts below and start saving instantly.

Popular 2011 Chevrolet Impala Transmission Parts Categories

Automatic Transmission Shift Linkage Bushings

OE Transmission Coolers

Torque Strut Mounts

Transmission Solenoids

Transmission Control Modules

Transmission Oil Cooler Lines

Automatic Transmission Shift Solenoids

Transmission Pan Gaskets

Shift Interlock Solenoids

Transmission Oil Cooler Fittings

Automatic Transmission Housing Gaskets

Automatic Transmission Line Connectors

Transmission Mounts

Transmission Oil Pans

Back Up and Neutral Safety Switches

Transmission Oil Pan Gaskets

Automatic Transmission Wiring Harness

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Automatic Transmission Control Modules

Automatic Transmission Output Shaft Seals

Transmission Temperature Sensors

Automatic Transmission Dipstick Seals

Back Up Light Relays

Manual Transmission Output Shaft Seals

Back Up Lamp Connectors

Remanufactured Automatic Transmissions

Back Up Light Wiring Harness

AT Torq Conv. Clutch Pulse Width Mod Solenoid

Essential Transmission Parts for 2011 Chevrolet Impalas

from

$226.37

An ACDelco GM Original Equipment Transmission Control Module is a GM-recommended replacement for your vehicle’s original component. It controls shifting in your vehicle if it has an automatic transmission. This original equipment transmission control module has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

This part requires programming and/or special setup procedures. GM Service Information or equivalent describes the procedures and special tools needed to ensure proper operation in the vehicle
Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$25.49

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$37.99

ACDelco GM Original Equipment Automatic Transmission Speed Sensor is a GM-recommended replacement component for one or more of the following vehicle systems: automatic transmission/transaxle, and/or manual drivetrain and axles. This original equipment sensor will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$39.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$33.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$282.99

B&M Deep Transmission Pans increase the fluid capacity of your transmission, improving the cooling, allowing your transmission to work as efficiently as possible. Included drain plug, eliminates the need to drop the pan to drain the fluid.

Product Features:

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs

from

$44.99

A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:

Unique Safety Interlock Design
Impervious to Vehicle Oils and Chemicals
Strong Enough Too Handle High Performance

from

$10.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$47.49

ACDelco Professional Neutral Safety Switch is a high quality aftermarket replacement component for one or more of the following vehicle systems: automatic transmission/transaxle, and/or manual drivetrain and axles. This premium aftermarket switch is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$8.99

Made of quality materials, this automatic transmission oil cooler line connector matches the fit and function of a damaged original equipment connector to restore leak-free performance between the transmission and the oil cooler.

Product Features:

Quality replacement – this transmission cooler connector matches the fit and function of the original equipment connector.
Durable construction – this oil cooler line connector is made of quality materials for a precise fit and leak-free durability.
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Ideal shop supply – this connector is recommended to have on hand any time service is being performed on the transmission oil cooler line

from

$19.99

CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:

Lifecycle tested to meet or exceed OE specifications
Direct OE replacement
High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
Global coverage for import and/or domestic applications.

from

$53.18

Speedometer Sensor

from

$2.62

Oil Dipstick Seal

from

$32.27

Engine Torque Rod Mo

from

$10.99

AT OIL PAN GASKET

from

$92.99

This shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles.
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current.
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$31.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$8.86

ACDelco is a global leader in automotive replacement parts and related services and offers quality aftermarket products for most makes and models, including General Motors, Ford, Chrysler, Toyota and Honda. ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and After sales, a division of General Motors.

from

$54.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$51.99

Automatic Transmission Torque Converter Clutch Pulse Width Modulation Valve

from

$4.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$149.99

This remanufactured transmission control module has been thoroughly tested to offer the same function and performance as the stock component – electronically controlling the vehicle’s automatic shifting – for far less than replacement at the dealer.

Product Features:

Remanufactured Transmission Control Module.
Remanufactured Transmission Control Module.
This remanufactured transmission control module has been thoroughly tested to offer the same function and performance as the stock component – electronically controlling the vehicle’s automatic shifting – for far less than replacement at the dealer.
Ideal replacement – this remanufactured transmission control module provides the same function and performance of the stock TCM
Cost-effective fix – module is equally compatible as original but far less expensive than replacement from dealership

from

$39.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$2357.00

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.

Product Features:

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$82.39

from

$16.49

ACDelco GM Original Equipment Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$48.99

AT/HARNESS VSS REPR

from

$21.99

Fixing a broken automatic transmission shift cable usually requires replacing the entire cable assembly. This Dorman OE FIX shift cable bushing kit saves expense by allowing the replacement of just the failed bushing..

Product Features:

Convenient solution – this shift cable bushing kit directly replaces a broken bushing and eliminates the need to replace the entire cable assembly..
Save time and money – save the expense and significant installation time of replacing an entire cable assembly
Ensure fit – this bushing kit is vehicle-specific and precision-engineered for specified General Motors and Chrysler models and years
Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

Upgrade your 2011 Chevrolet Impala with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2011 Chevrolet Impala, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Transmission Parts are key to keeping your Impala functioning at its best. At Advance Auto Parts, we offer a wide selection of 73 Transmission Parts for the 2011 Chevrolet Impala, designed to meet your needs without breaking the bank. From Transmission Seal replacements to Transmission Mounts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2011 Chevrolet Impala at great prices. Our Transmission Parts inventory for this model ranges from just $2.62 to $2,421.00, with an average price of $165.20. Our 73 Transmission Parts in stock come from 20 trusted brands, so you’re sure to find the right part for your 2011 Chevrolet Impala without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Chevrolet Impala, we stock popular OEM and aftermarket Transmission Parts from top names like Permatex, Imperial, Dorman, and more. Permatex Transmission Parts start at just $6.99 and boast an impressive 5 stars average rating from customers. Imperial and Dorman also bring quality to the table, with Transmission Parts available starting at $8.99, and at an average 4 stars rating. With 1,554 customer reviews and counting, our 2011 Chevrolet Impala Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2011 Chevrolet Impala is always ready to roll. We’re committed to providing you with everything you need to keep your Impala in top shape, all in one place. Start shopping confidently below for your 2011 Chevrolet Impala!

Best-Selling Transmission Seals for 2011 Chevrolet Impalas

Enhance the driving experience in your Chevrolet with 4 quality Transmission Seal components, starting at $2.62.

show more show less

from

$8.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$8.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40°F to 225°F / -40°C to 107°C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$4.79

Product Features:

Brand may vary by location

from

$2.62

Oil Dipstick Seal

Most Popular 2011 Chevrolet Impala Transmission Mounts

Customize your Chevrolet with 5 Transmission Mounts products like Transmission Mounts and Torque Strut Mounts, all priced under $42.99.

show more show less

from

$29.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 97-09; CHEV 97-11; OLDS 97-04; PONT 97-09; SATURN 05-07;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1997-2011
Weight approx: 2 Lbs
SOLID RUBBER

from

$28.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 06-07; CHEV 06-11;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2006-2011
Weight approx: 1 Lbs
TORQUE STRUT

from

$42.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 94-96; CHEV 91-11; OLDS 91-02; PONT 91-07;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1991-2011
Weight approx: 3 Lbs
HYDRAULIC

from

$36.05

Transmission Mount

from

$31.58

Engine Torque Rod Mo

Top Picks for 2011 Chevrolet Impala Automatic Transmission Parts

Upgrade Chevrolet Impalas with top-quality Automatic Transmission Parts parts, including 19 OEM and aftermarket selections for your 2011 model.

show more show less

from

$43.99

Shift Solenoid

from

$1949.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$92.99

Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles.
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current.
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$21.99

Convenient solution – this shift cable bushing kit directly replaces a broken bushing and eliminates the need to replace the entire cable assembly..
Save time and money – save the expense and significant installation time of replacing an entire cable assembly
Ensure fit – this bushing kit is vehicle-specific and precision-engineered for specified General Motors and Chrysler models and years
Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

from

$174.99

GM Genuine Parts Transmission Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules help control shifting in vehicles with automatic transmissions. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$149.99

Remanufactured Transmission Control Module.
Remanufactured Transmission Control Module.
This remanufactured transmission control module has been thoroughly tested to offer the same function and performance as the stock component – electronically controlling the vehicle’s automatic shifting – for far less than replacement at the dealer.
Ideal replacement – this remanufactured transmission control module provides the same function and performance of the stock TCM
Cost-effective fix – module is equally compatible as original but far less expensive than replacement from dealership

from

$226.37

This part requires programming and/or special setup procedures. GM Service Information or equivalent describes the procedures and special tools needed to ensure proper operation in the vehicle
Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$2421.00

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$2420.00

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$1989.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$1989.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$1989.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$1971.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$1914.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$183.99

ATHARNESS VSS REPR

from

$123.94

AT Pressure Control

from

$81.17

AT Torq Con Cl Pulse

from

$51.99

Automatic Transmission Torque Converter Clutch Pulse Width Modulation Valve

from

$47.29

AT Solenoid

In-Demand Automatic Transmission Pan and Gaskets for 2011 Chevrolet Impalas

Select from 11 premium Automatic Transmission Pan and Gaskets parts for your 2011 Chevrolet Impala, with prices ranging from $6.99 to $75.10.

show more show less

from

$11.49

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$33.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$6.99

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$19.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$39.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$53.99

This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.

Product Features:

Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement.
Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance.
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$16.99

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 90 minutes

from

$39.99

REUSABLE AT PAN GSKT

from

$28.49

Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:

Ideal for rigid cast aluminum parts
Meets OEM Specifications
Sensor safe & non-corrosive
Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
Blowout resistant, allowing leakproof gaskets to be made in just one minute
Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.

from

$32.99

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

Designed specially for high-torque and high vibration applications
Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
OEM specified
Low-odor, non-corrosive formula
Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

from

$75.10

Dorman, AT Oil Pan

Most Sold 2011 Chevrolet Impala Transmission Cooler and Parts

Explore our best-selling Chevrolet parts for the 2011 Impala among 15 OEM and aftermarket options starting from $8.86.

show more show less

from

$85.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$53.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$73.99

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool® plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

from

$59.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems

from

$54.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$39.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design

from

$52.99

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$81.99

High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion

from

$29.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$67.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$309.99

This automatic transmission oil cooler is designed to match the function of an original cooler on specified vehicles. It is engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion, or damage.

Product Features:

Direct replacement – this automatic transmission fluid cooler is designed to match the function of an original cooler on specified vehicle.
Ideal solution – engineered to help maintain proper transmission fluid temperature when an original cooler has failed from heat, corrosion or damage.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$285.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$131.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$8.86

Top-Rated Transmission Parts Brands For Your 2011 Chevrolet Impala

Shop for the best-rated brands offering Transmission Parts and other products for your 2011 Chevrolet Impalas. Below you’ll find some of our best rated Transmission Parts from Permatex, Imperial, and Dorman, and more. Transmission Parts from these brands that fit a 2011 Impala start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2011 Chevrolet Impala Transmission Parts

When it comes to maintaining or upgrading your 2011 Chevrolet Impala, using quality Transmission Parts is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Transmission Parts, specifically designed for the 2011 Chevrolet Impala. With over 6 Permatex brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $19.49. Plus, with over 106 customer reviews and an average rating of 5 stars, you can trust that our Permatex Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$32.99

This product is not rated

Ultra Grey RTV Gasket Maker (9.5 oz.)

“”

from
$28.49

This product is not rated

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

“”

from
$16.99

This product is not rated

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

“”

Popular Imperial 2011 Chevrolet Impala Transmission Parts

Imperial auto parts is one of the highest quality Transmission Part brands in the market. Any 2011 Chevrolet Impala owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 2011 Impala, Advance Auto Parts carries a full inventory of 9 Imperial Transmission Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Imperial Transmission Parts range from $39.99 to $85.99, plus, with more than 114 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from
$73.99

(7)

Maxi-Kool® XL Transmission Oil Cooler

“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”

from
$85.99

(4)

High Performance Transmission Oil Cooler

“good quality,easy to install.”

from
$67.99

This product is not rated

High Performance Transmission Oil Cooler

“”

FAQs for 2011 Chevrolet Impala Transmission Parts

Which Transmission Parts are best-sellers for 2011 Chevrolet Impalas?

Out of 73 Transmission Parts that fit 2011 Chevrolet Impalas, the following parts are the top sellers:

Sensor-Safe, High-Torque RTV Silicone Gasket Maker (7160017) – $11.49
Multi Purpose Seal (18443030) – $8.99
Transmission Oil Pan Gasket (15780904) – $33.99

What’s the price range for 2011 Chevrolet Impala Transmission Parts?

Transmission Part prices for the 2011 Chevrolet Impala start at $2.62 and go up to $2,421.00 for the most premium parts.

What’s the average price of a Transmission Part for a 2011 Chevrolet Impala?

The average price for Transmission Parts for the 2011 Chevrolet Impala is $165.20. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Chevrolet Impala model years?

Yes, we currently carry Transmission Parts for 51 model years of Chevrolet Impalas between 1958 and 2020. Transmission Parts are bought most frequently for the following model years: 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, and 2012.

What are the cheapest Transmission Parts for my 2011 Chevrolet Impala?

The cheapest 2011 Chevrolet Impala Transmission Parts we carry in stock are:

Oil Dipstick Seal (11844774) – $2.62
Auto Transmission Output Shaft Seal (11407780) – $4.79
Sensor-Safe, High Torque RTV Silicone Gasket Maker (99997948) – $6.99
Multi Purpose Seal (18445467) – $8.49
Automatic Transmission Cooling Hose Retainer (10787841) – $8.86

What are the top-rated Transmission Parts that fit the 2011 Chevrolet Impala?

Out of 1,554 reviews by customers, our 2011 Chevrolet Impala Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2011 Chevrolet Impala and their top-rated products:

Transmission Connectors
- Transmission Line Connector (11153251) – $16.49
- Transmission Line Connector – 3/8 in OD Tube x 9/16-18 UNF Thread (10916185) – $8.99
- Transmission Line Connector – Tube Size 3/8 – Thread 9/16-18UNF (10266804) – $10.99
Automatic Transmission Pan and Gaskets
- Transmission Line Connector (11153251) – $16.49
- Transmission Line Connector – 3/8 in OD Tube x 9/16-18 UNF Thread (10916185) – $8.99
- Transmission Line Connector – Tube Size 3/8 – Thread 9/16-18UNF (10266804) – $10.99

What types of Transmission Parts do you sell for my 2011 Chevrolet Impala?

As of 2/5/25, these are some of the most in-demand types of Transmission Parts for a 2011 Chevrolet Impala:

Can I get help with 2011 Chevrolet Impala Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Transmission Parts and more.

What is your return policy for Chevrolet Impala Transmission Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Impala Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2011 Chevrolet Impala Transmission Parts

ACDelco – GM Original Equipment Transmission Control Module- Remanufactured (Part No.J2503576976ACD)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-152)

ACDelco – Automatic Transmission Speed Sensor (Part No.213-4324)

Felpro – AUTOMATIC TRANSMISSION OIL PAN GASKET (Part No.TOS 18723)

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18717)

B & M – Cast Powerglide Transmission Pan (Part No.70280)

Energy Suspension – Transmission Mount (Part No.3.1108R)

National – Bearings (Part No.LM501314)

ACDelco – Neutral Safety Switch (Part No.D2219C)

Dorman – Transmission Line Connector With 3/8 Tube X 1/4-18 In. Thread (Part No.800-604)

Carquest Premium – Automatic Transmission Fluid Temperature Sensor (Part No.WTA1322)

ACDelco – Speedometer Sensor (Part No.P4018545508ACD)

Mahle – Oil Dipstick Seal (Part No.A1120666332MAH)

International Suspension Group – Engine Torque Rod Mo (Part No.A7035411243ISG)

ATP – AT OIL PAN GASKET (Part No.JG-108)

Dorman – Transmission Shift Interlock Solenoid (Part No.924-975)

ACDelco – Black Multi-Purpose Pigtail (Part No.PT2647)

ACDelco – Automatic Transmission Cooling Hose Retainer (Part No.J2004409720ACD)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)

GM Genuine Parts – Automatic Transmission Torque Converter Clutch Pulse Width Modulation Valve (Part No.24227747)

Driveworks – Oil Seal (Part No.S-9613S)

Dorman – Remanufactured Transmission Control Module (Part No.599-120)

ACDelco – Multi-Purpose Pigtail (Part No.PT2834)

Spartan – Automatic Transmission Assembly; GM FWD 4T65E 4-Speed (Part No.4717A-FL)

ACDelco – Automatic Transmission Solenoid (Part No.J4006209907ACD)

ACDelco – Black Multi-Purpose Relay (Part No.D1780C)

ATP – AT/HARNESS VSS REPR (Part No.JE-15)

Dorman – Help – Shift Cable Bushing Kit (Part No.14104)

National – Multi Purpose Seal (Part No.3543)

National – Multi Purpose Seal (Part No.100165)

Driveworks – Auto Transmission Output Shaft Seal (Part No.S-100165)

Mahle – Oil Dipstick Seal (Part No.A1120666332MAH)

Anchor – Transmission Mount: Left, 1 Piece (Part No.2818)

Anchor – Torque Strut Motor Mount: Front Left, Front Right, 1 Piece (Part No.3090)

Anchor – Transmission Mount: Left, Rear, 1 Piece (Part No.2712)

Autopart International Inc – Transmission Mount (Part No.J60002803428API)

International Suspension Group – Engine Torque Rod Mo (Part No.A7035413279ISG)

ATP – Shift Solenoid (Part No.JE-54)

Shift Pro by ETE – 4T65E Automatic Transmission Assembly (Part No.T280465)

Dorman – Transmission Shift Interlock Solenoid (Part No.924-975)

Dorman – Help – Shift Cable Bushing Kit (Part No.14104)

GM Genuine Parts – Transmission Control Module (Part No.24252114)

Dorman – Remanufactured Transmission Control Module (Part No.599-120)

ACDelco – GM Original Equipment Transmission Control Module- Remanufactured (Part No.J2503576976ACD)

Spartan – Automatic Transmission Assembly; GM FWD 4T65E 4-Speed (Part No.4793A-JZ)

Spartan – Automatic Transmission Assembly; GM FWD 4T65E 4-Speed (Part No.4794A-JZ)

Moveras – 4T65E – Automatic Transmission (Part No.M01511)

Moveras – 4T65E – Automatic Transmission (Part No.M01759)

Moveras – 4T65E – Automatic Transmission (Part No.M01689)

Shift Pro by ETE – 4T65E Automatic Transmission Assembly (Part No.T280461)

Shift Pro by ETE – 4T65E Automatic Transmission Assembly (Part No.T280480)

ATP – ATHARNESS VSS REPR (Part No.JE-31)

ACDelco – AT Pressure Control (Part No.J4006209898ACD)

ACDelco – AT Torq Con Cl Pulse (Part No.J4006209906ACD)

GM Genuine Parts – Automatic Transmission Torque Converter Clutch Pulse Width Modulation Valve (Part No.24227747)

ACDelco – AT Solenoid (Part No.J4006209881ACD)

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18717)

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

Felpro – AUTOMATIC TRANSMISSION OIL PAN GASKET (Part No.TOS 18723)

Dorman – Transmission Oil Pan: Direct Fit, Steel, 13.5 Quart (Part No.265-814)

Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)

ATP – REUSABLE AT PAN GSKT (Part No.JG-143)

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

Dorman – Dorman, AT Oil Pan (Part No.J5030683698DOR)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-958)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (Part No.243006)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-122)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Dorman – Transmission Oil Cooler (Part No.918-245)