2011 Chevrolet Corvette Performance and Racing Products
Find Your Specific 2011 Chevrolet Corvette Performance and Racing Products
Below you will find various in-demand Chevrolet Performance and Racing Products, components and accessories for your 2011 Corvette. Advance Auto Parts has popular Corvette parts like Performance Exhaust Products, Performance Air Intake Kits, Performance Suspension Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Corvette model years including
2010,
2012,
2013,
2014,
2015,
2016,
2017,
2018,
2019 and more. Select a category of 2011 Chevrolet Corvette Performance and Racing Products below and start saving instantly.
Popular 2011 Chevrolet Corvette Performance and Racing Products Categories
Essential Performance and Racing Products for 2011 Chevrolet Corvettes
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 22 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-12732)
from
$529.99
Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The end tanks are constructed out of 3/16 in. TIG welded aluminum plate tanks that incorporate three multi-directional vanes that efficiently direct air flow through the entire core for maximum cooling. The Bladerunner intercooler also comes with 4 1/8 in. pre-tapped ports for easy gauge installation as well as other auxiliary input options. Tested at 200psi which is perfect for the high boost applications. In recent testing the Bladerunner intercooler produced a 200 deg. temperature drop and a 100 deg. EGT drop as well as increasing air flow by 30 percent. Don’t waste your time and money on modified factory intercooler. Invest in the aFe Bladerunner intercooler. the most sophisticated intercooler design on the planet.
Product Features:
See More
Product Features:
- 1-Piece Heat Shield
- Mandrel Bent Tubing
- Hassle Free Installation
K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (Part No.57-3052)
from
$499.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)
from
$111.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Competition Cams – Set of 16 Single Springs w/ 1.254" O.D., 1.254" I.D., 1.700" Installed Height (Part No.981-16)
from
$126.99
Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.
Product Features:
See More
Product Features:
- Seat pressure: 105 lbs. @ 1.700″, Open Pressure: 273 lbs. @ 1.250″
- O.D.: 1.254″, I.D.: .880″
- Single valve springs with damper
- Approximately .490″ max lift at recommended installed height
FAG US – CUP (Part No.LM48510)
from
$7.69
CUP
K&N – Cold Air Intake: Adds Up To 11 Horsepower, With Million Mile Air Filter (Part No.63-1050)
from
$449.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 18 Horsepower, With Million Mile Air Filter (Part No.63-3073)
from
$499.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Energy Suspension – Control Arm Bushing Set (Part No.3.3177R)
from
$83.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.3.3142R)
from
$118.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.3.3145G)
from
$78.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.3.3176R)
from
$74.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.3.3108G)
from
$105.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.3.3177G)
from
$87.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Hooker Headers – LS1 Swap Long Tube Headers for 66-72 Chevelle, El Camino & More (Part No.2456HKR)
from
$318.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Hooker Headers – LS Cast Iron Exhaust Manifold (Part No.8501-3HKR)
from
$576.99
LS Cast Iron Exhaust Manifold
Hooker Headers – Super Comp. Header (Part No.2123-1HKR)
from
$1133.00
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Edelbrock – Water Pump for Small-Block 1984-91 350 Corvettes in Polished Finish (Short) (Part No.8825)
from
$472.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.
Product Features:
See More
Product Features:
- Maximum Cooling for Street and Racing Engines
- Internal Passages Are Balanced for Maximum Flow
- Impeller is Larger than Others For Max Pressure
- Impeller Vanes Dramatically Increase Flow Rates
- Equal Distribution to Both Sides of Block
- Only Flows in One-Direction for Optimum Efficiency
Weiand – Team G; Water Pump Spacer Kit (Part No.8207)
from
$112.99
Use with a short water pump to convert to a long water pump.
Product Features:
See More
Product Features:
- Water Pump Spacer Kit
Edelbrock – Water Pump Big-Block Chevy Short/Standard in Satin Finish (Part No.8850)
from
$374.99
Product Features:
See More
- 5/8in. pilot shaft, aluminum, short style water pump
- Unique O-ring provides a far superior seal than conventional gaskets
- Extremely durable as well as efficient
- Provides maximum flow, maximum pressure and equal distribution to both sides of the block within 1-percent
- Includes heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, and leak-proof seals
Edelbrock – Water Pump Big-Block Chevy Short/Standard in Black Finish (Part No.88503)
from
$402.99
Edelbrock #88503 Water Pump big block Chevy short black ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooling” Water Pu
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.625 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 5.750 in. Block To Hub Height
- Black Finish
B & M – Flexplate For 168 Tooth 454 CID Engine (Part No.20233)
from
$158.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1965-90 Chevrolet big block 454ci (externally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions
Product Features:
See More
Product Features:
- NHRA/IHRA Legal For All Classes
- Includes SFI Certification Sticker
- Ideal For Street Applications
- To Extreme Duty Racing
- To High RPM Use
Hays – Flexplate GM Ls (Part No.10-030)
from
$179.99
Flexplate GM Ls
Hays – Flexplate: Chevy 57-85 (153T) (Part No.10-012)
from
$145.99
Constructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.
Product Features:
See More
Product Features:
- Thicker Than Stock Steel Plate
- Ring Gear Securely Welded
- Dual Bolt Patterns
- Zinc-Dichromate Plated To Resist Corrosion
- Withstands High Torque and RPM
Hays – Flywheel: GM Ls-1 30Lb Steel (Part No.10-730)
from
$448.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
Hypertech – Street Runner Power Chip (Part No.155371)
from
$158.89
Hypertech Power Chips are engineered for stock 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. Street Runner Power Chips are designed for daily street driving or competition in unmodified vehicles using a stock thermostat.
Product Features:
See More
Product Features:
- Designed For Daily Street Driving
- For Unmodified Vehicles w/Stock Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
Hypertech – ThermoMaster Power Computer Chip, with Overdrive (Part No.159302)
from
$252.89
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).
Product Features:
See More
Product Features:
- Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
Hypertech – ThermoMaster Power Chip (Part No.11552)
from
$168.89
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).
Product Features:
See More
Product Features:
- Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
- Product might not be available in all states due to local laws.
Hypertech – ThermoMaster Power Computer Chip, with Overdrive (Part No.158332)
from
$252.89
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).
Product Features:
See More
Product Features:
- Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
Upgrade your 2011 Chevrolet Corvette with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2011 Chevrolet Corvette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your Corvette functioning at its best. At Advance Auto Parts, we offer a wide selection of 13 Performance and Racing Products for the 2011 Chevrolet Corvette, designed to meet your needs without breaking the bank.
From
Performance Exhaust Product
replacements to
Performance Air Intake Kits
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2011 Chevrolet Corvette at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $7.69 to $999.99, with
an average price of $354.08.
Our 13 Performance and Racing Products in stock come from 10 trusted brands, so you’re sure to find the right part for your 2011 Chevrolet Corvette without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2011 Chevrolet Corvette is always ready to roll. We’re committed to providing you with everything you need to keep your Corvette in top shape, all in one place.
Start shopping confidently below for your 2011 Chevrolet Corvette!
Best-Selling Performance Exhaust Products for 2011 Chevrolet Corvettes
Enhance the driving experience in your Chevrolet with 1 quality Performance Exhaust Product components, starting at $576.99.
Hooker Headers – LS Cast Iron Exhaust Manifold (Part No.8501-3HKR)
from
$576.99
LS Cast Iron Exhaust Manifold
Most Popular 2011 Chevrolet Corvette Performance Air Intake Kits
Customize your Chevrolet with 3 Performance Air Intake Kits products
like Engine Cold Air Intakes and
Performance Air Intake Kits, all
priced under $999.99.
K&N – Cold Air Intake: Adds Up To 27 Horsepower, With Million Mile Air Filter (Part No.63-3080)
from
$999.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 18 Horsepower, With Million Mile Air Filter (Part No.63-3073)
from
$499.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 22 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-12732)
from
$529.99
Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The end tanks are constructed out of 3/16 in. TIG welded aluminum plate tanks that incorporate three multi-directional vanes that efficiently direct air flow through the entire core for maximum cooling. The Bladerunner intercooler also comes with 4 1/8 in. pre-tapped ports for easy gauge installation as well as other auxiliary input options. Tested at 200psi which is perfect for the high boost applications. In recent testing the Bladerunner intercooler produced a 200 deg. temperature drop and a 100 deg. EGT drop as well as increasing air flow by 30 percent. Don’t waste your time and money on modified factory intercooler. Invest in the aFe Bladerunner intercooler. the most sophisticated intercooler design on the planet.
Product Features:
See More
Product Features:
- 1-Piece Heat Shield
- Mandrel Bent Tubing
- Hassle Free Installation
Top Picks for 2011 Chevrolet Corvette Performance Suspension Products
Upgrade Chevrolet Corvettes with top-quality Performance Suspension Products parts, including 3 OEM and aftermarket selections for your 2011 model.
Energy Suspension – Control Arm Bushing Set (Part No.3.3177R)
from
$83.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.3.3176R)
from
$74.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.3.3177G)
from
$87.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
In-Demand Performance Engines for 2011 Chevrolet Corvettes
Select from 2 premium Performance Engines parts for your 2011 Chevrolet Corvette, with prices ranging from $524.99 to $594.99.
Competition Cams – VALVE SPRINGS, 1.310" BEEHIVE 1 ST (Part No.26918-16)
from
$594.99
With a .625″ maximum lift, these Beehive Valve Springs were designed for hydraulic roller cams in LS1, LS2 and LS6 engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.
Product Features:
See More
Product Features:
- Seat pressure: 125 lbs. @ 1.800″, Open Pressure: 367 lbs. @ 1.150″
- O.D.: 1.075″ (Top) 1.310″ (Bottom), I.D.: .650″ (Top) .885″ (Bottom)
- Designed for hydraulic roller cams
- .625″ maximum lift, 1.310″ O.D.
- Originally designed for LS engine applications but will work in 5.7L Hemi engines and many others
Edelbrock – Water Pump for GM LS Victor Pro (Clockwise Rotation) (Part No.8895)
from
$524.99
Edelbrock #8895 Water Pump GM gen III ls1 & gen iv ls engines insert style ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “supe
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.750 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 6.00 in. Block To Hub Height
- Natural Finish
Most Sold 2011 Chevrolet Corvette Performance Transmissions
Explore our best-selling Chevrolet parts for the 2011 Corvette among 1 OEM and aftermarket options starting from $7.69.
FAG US – CUP (Part No.LM48510)
from
$7.69
CUP
FAQs for 2011 Chevrolet Corvette Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2011 Chevrolet Corvettes?
Out of 13 Performance and Racing Products that fit 2011 Chevrolet Corvettes, the following parts are the top sellers:
- Speedometer Calibrator Color: Recalibrate your speedometer to account for changes to tire size (12452493) – $239.99
- Flexplate GM Ls (11889215) – $179.99
- X4 Performance Programmer (11844155) – $456.99
What’s the price range for 2011 Chevrolet Corvette Performance and Racing Products?
Performance and Racing Product prices for the 2011 Chevrolet Corvette start at $7.69 and go up to $999.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2011 Chevrolet Corvette?
The average price for Performance and Racing Products for the 2011 Chevrolet Corvette is $354.08. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet Corvette model years?
What are the cheapest Performance and Racing Products for my 2011 Chevrolet Corvette?
The cheapest 2011 Chevrolet Corvette Performance and Racing Products we carry in stock are:
- CUP (50206003) – $7.69
- Control Arm Bushing Set (22907962) – $74.99
- Control Arm Bushing Set (22907967) – $83.99
- Control Arm Bushing Set (22907966) – $87.99
- Flexplate GM Ls (11889215) – $179.99
What are the top-rated Performance and Racing Products that fit the 2011 Chevrolet Corvette?
Out of 16 reviews by customers, our 2011 Chevrolet Corvette Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2011 Chevrolet Corvette and their top-rated products:
- Performance Air Intake Kits
- Cold Air Intake: Adds Up To 27 Horsepower, With Million Mile Air Filter (10443238) – $999.99
- Cold Air Intake: Adds Up To 18 Horsepower, With Million Mile Air Filter (10173533) – $499.99
What types of Performance and Racing Products do you sell for my 2011 Chevrolet Corvette?
As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 2011 Chevrolet Corvette:
Can I get help with 2011 Chevrolet Corvette Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.
What is your return policy for Chevrolet Corvette Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
