2011 Chevrolet Camaro Drivetrains
Find Your Specific 2011 Chevrolet Camaro Drivetrains
Below you will find various in-demand Chevrolet Drivetrains, components and accessories for your 2011 Camaro. Advance Auto Parts has popular Camaro parts like Drive Shafts and Axles, Differentials, Transfer Cases and more. You’ll also find aftermarket and OEM Drivetrains for other Camaro model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2011 Chevrolet Camaro Drivetrains below and start saving instantly.
Popular 2011 Chevrolet Camaro Drivetrains Categories
Essential Drivetrains for 2011 Chevrolet Camaros
Driveworks – Taper Bearing Set (Part No.S-A-5)
from
$9.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Adapter Sleeve Fro GM 7.2", 7.625" & 8.0" Yokes To Use Triple Lip Pinion Seal (Part No.41210)
from
$25.99
Yukon 4340 Chrome-Moly replacement outer stub for D44 ’87-’94 Wrangler with a length of 8.31″ and 27 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.
Product Features:
See More
Product Features:
- 27 spline
- 8.31″ long
- Fits Dana Spicer 30 in 1987-1994 Wrangler
- Outer stub
- 5-760X U-joint size
- 4340 Chromoly
- For WARN hub conversion only
Yukon Gear – Bearing Race Driver (Part No.56017)
from
$215.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM89410 race
- All steel construction
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
National – Shaft Repair Sleeve (Part No.99125)
from
$30.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Yukon Gear – Bearing Install Kit For GM 8.5" With HD Differential (Part No.11069)
from
$263.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set. This kit is used in 8.5″ differentials using a Yukon Dura Grip, Eaton posi, ValueTrac, True Trac, Pro-Series Auburn, Detroit Locker or standard carrier with large bearing journals.
Product Features:
See More
Product Features:
- Fits GM 8.5″ rear with aftermarket positraction
- Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.
Motive Gear – Differential Pinion Seal (Part No.8460N)
from
$8.29
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)
National – Multi-Purpose Seal (Part No.5208)
from
$20.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Multi-Purpose Seal (Part No.710864)
from
$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Whiteline – Rear Differential Bushing (Part No.W93167)
from
$61.99
Whiteline’s differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.
Product Features:
See More
Product Features:
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)
from
$59.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Pro-King – Differential Cross Shaft (Part No.742G930)
from
$2.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Powertrax – Grip LOK Traction System (Part No.LK444430)
from
$658.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Pro-King – Differential Ring Gear Bolt (Part No.742J935)
from
$0.91
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
Yukon Gear – High Performance Ring & Pinion Gear Set For GM 12 Bolt Car In A 3.73 Ratio (Part No.24123)
from
$404.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits GM 12 bolt passenger car
- 8.875″ ring gear diameter
- 30 spline pinion
- 12 ring gear bolts
- 3.73 ratio
National – Multi Purpose Seal (Part No.7412S)
from
$4.99
Product Features:
See More
- Design type: spring loaded; single-lip
- Temperature range: -40 deg. F to 225 deg. F / -40 deg. C to 107 deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Pro-King – Differential Crush Sleeve (Part No.721A034)
from
$2.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
National – Tapered Roller Bearing Cone (Part No.HM89449)
from
$23.99
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)
from
$39.99
8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.
Product Features:
See More
Product Features:
- Pinion depth shim kit for Toyota 7.5″, 8″ and V6
Carquest Premium – C/V Axle (Part No.NCV706691)
from
$145.99
C/V Axle
National – Bearing (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Shaft Repair Sleeve (Part No.99210)
from
$47.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Motive Gear – Differential Gear Install Kit (Part No.GM7.5IK)
Dorman – Drive Shaft: Adjustable (Part No.976-677)
from
$657.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Powertrax – Lock Right Locker (Part No.1930-LR)
from
$445.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Yukon Gear – Zip Locker Soleniod Valve (Part No.34014)
Upgrade your 2011 Chevrolet Camaro with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 2011 Chevrolet Camaro, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Drivetrains are key to keeping your Camaro functioning at its best. At Advance Auto Parts, we offer a wide selection of 65 Drivetrains for the 2011 Chevrolet Camaro, designed to meet your needs without breaking the bank.
From
Drive Shafts and Axle
replacements to
Differentials
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2011 Chevrolet Camaro at great prices.
Our Drivetrains inventory for this model
ranges from just $2.99 to $1,566.99, with
an average price of $199.84.
Our 65 Drivetrains in stock come from 14 trusted brands, so you’re sure to find the right part for your 2011 Chevrolet Camaro without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Chevrolet Camaro, we stock popular OEM and aftermarket Drivetrains from top names
like Valvoline, National, Driveworks, and more.
Valvoline Drivetrains
start at just $35.99 and boast an impressive 4.8 stars average rating from customers.
National and Driveworks also bring quality to the table, with Drivetrains available starting at $8.99, and at an average 4.3 stars rating.
With 2,124 customer reviews and counting, our 2011 Chevrolet Camaro Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2011 Chevrolet Camaro is always ready to roll. We’re committed to providing you with everything you need to keep your Camaro in top shape, all in one place.
Start shopping confidently below for your 2011 Chevrolet Camaro!
Best-Selling Drive Shafts and Axles for 2011 Chevrolet Camaros
Enhance the driving experience in your Chevrolet with 17 quality Drive Shafts and Axle components, starting at $9.99.
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Driveworks – Taper Bearing Set (Part No.S-A-5)
from
$9.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)
from
$59.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Shaft Repair Sleeve (Part No.99125)
from
$30.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
National – Multi-Purpose Seal (Part No.710864)
from
$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Drive Axle Shaft Seal (Part No.710888)
from
$23.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Carquest Premium – New CV Axle Assembly (Part No.NCV706661)
from
$132.99
Manufactured to be an OE replacement, CV axles use 100% new materials and are engineered for ease of installation and long service.
Product Features:
See More
Product Features:
- All New Materials
- Engineered for OE Fitment
- Negative 40 Degree Rated CV Boots
- Moly-Blend Grease in inner and outer joints
- New nut and mounting hardware included if required
Carquest Premium – C/V Axle (Part No.NCV706691)
from
$145.99
C/V Axle
Dorman – Rear Drive Shaft: Adjustable (Part No.976-738)
from
$709.99
Product Features:
See More
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Two-Piece Steel Driveshaft Assembly (OE Fix) (Part No.946-029)
from
$699.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance.
Product Features:
See More
Product Features:
- Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
- Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
- All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Dorman – Two-Piece Steel Driveshaft Assembly (OE Fix) (Part No.946-030)
from
$685.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance.
Product Features:
See More
Product Features:
- Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
- Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
- All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Dorman – Drive Shaft: Adjustable (Part No.976-677)
from
$657.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Carquest Premium – CV Axle Assembly (Part No.NCV10297)
from
$171.99
Product Features:
See More
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Dorman – Driveshaft Flex Coupler (Part No.935-510)
from
$135.99
This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles
- Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Anchor – Center Support Bearing (Part No.6148)
from
$72.99
Product Features:
See More
- Center support bearings support a driveshaft between transmission and differential. This mount relieves stress on driveline components.
- Natural and SBR rubber provide maximum life and performance.
- Steel fasteners are heat treated grade 5 bolts.
- A special bonding agent is used to ensure a rubber to metal bond.
- Rubber material is mixed to specific Durometer, hardness.
- Limited Warranty.
- All center supports are specifically engineered and designed to OE standards using the latest CAD/CAM engineering process ensuring the highest consistency and quality.
- Only natural and Styrene Butadiene rubber is used to provide premium abrasion resistance and aging stability to ensure maximum life and performance.
- Any included fasteners are hardened steel with heat treated Grade No. 5 bolts.
- Chemlock bonding agent is used to ensure a superior rubber-to-metal bond.
- Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- The housing frame is made from durable heavy gauge steel that extends the service life.
- Most center supports include a sealed bearing and dust shield and are ready to install.
Yukon Gear – 10 & Up V6 Camaro 195Mm / GM 7.6Irs Pinion Seal (Part No.30289)
Yukon Gear – 10 & Up V6 Camaro 195Mm / GM 7.6Irs Stub Axle Seal (Part No.30288)
from
$51.99
’10 & up V6 Camaro GM 7.6IRS stub axle seal.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Stub axle seal
- Fits GM 7.6″ IRS Camaro
Most Popular 2011 Chevrolet Camaro Differentials
Customize your Chevrolet with 43 Differentials products
like Differential Oil,
Differential Bearings, and
Differential Pinion Seals, all
priced under $1,566.99.
Valvoline – MaxLife Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.773775)
from
$35.99
Valvoline MaxLife Multi-Vehicle ATF is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi. Recommended for use in the following applications: GM DEXRON-II, DEXRON-III, DEXRON-VI, Ford MERCON LV, Toyota/Lexus Type T, T-II, T-IV, WS, Honda/Acura, ATF-Z1, Nissan/Infiniti Matic-D, Matic-J, Matric-K, Matic-S, Hyundai/Kia SP-II, SP-III, SP-IV, SPH-IV, BMW 7045E, ETL 8072B, LA2634, LT71141, Allison C-4, Mercedes Benz NAG-1, Volvo 1161521, 1161540, 97340, 1273.41, and VW/Audi G-052-025-A2, G-052-162-A1. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base oils and long life friction modifiers to help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
National – Bearing Race (Part No.LM501314)
from
$11.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Driveworks – Taper Bearing Cone (Part No.S-LM-501349)
from
$10.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)
from
$6.79
This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)
from
$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.
Product Features:
See More
Product Features:
- Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)
from
$44.99
3 Qt. Penzoil 80W90 conventional gear Oil.
Product Features:
See More
Product Features:
- Includes three quarts of conventional oil
Motive Gear – Ring Gear Bolt (Part No.14066913)
Yukon Gear – Ring Gear Bolt (Part No.33049)
from
$6.99
Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.
Product Features:
See More
Product Features:
- Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
- 7/16″ x 20
National – Bearing Race (Part No.M86610)
from
$9.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Dorman – Help – Pinion Crush Sleeves (Part No.81058)
from
$6.99
This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles
- Required replacement – when servicing the differential
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Tapered Roller Bearing Cone (Part No.HM89249)
from
$31.99
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)
from
$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
National – Tapered Roller Bearing Cone (Part No.HM804846)
from
$43.99
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.32207)
from
$46.99
Product Features:
See More
- CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS: Precision manufactured using high-quality materials for durability and performance
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
Yukon Gear – Pinion Depth Shims For GM 7.5", 7.75", 8.2" & 12 Bolt Truck (Part No.55008)
from
$21.99
Product Features:
See More
- Pinion depth shims for GM 7.5″, 7.625″, 7.6 IFS, 7.6 IRS, 7.75″, 8.2″, 1955-1964 passenger car and 12 bolt car and truck
Yukon Gear – Crush Sleeve (Part No.33099)
from
$13.99
Crush Sleeve for Chrysler 9.25″ front, GM 8.6″ IRS, 9.25″ IFS & 9.5″. Approx 0.640″ long.
Product Features:
See More
Product Features:
- Crush sleeve for Chrysler 9.25″ front, GM 8.6″ IRS, 9.25″ IFS and 9.5″
- 0.640″ tall
Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)
from
$59.99
Product Features:
See More
- Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
- Interlocking design makes installation much easier
National – Bearing Race (Part No.HM89210)
from
$14.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Crush Sleeve For GM 7.6" IRS, 8.5", 8.6", 8.75", 8.875" & Nissan Titan Rear – Approx 0.620" Long (Part No.33097)
from
$5.99
Replacement Crush Sleeve for GM 7.6″ IRS, 8.5″, 8.6″, 8.75″, 8.875″ & Nissan Titan rear. Approx 0.620″ long.
Product Features:
See More
Product Features:
- Crush sleeve for Jeep JK rear, GM 7.6″ IRS, 8.5″ and 8.6″ and Nissan Titan rear
- 0.620″ tall
Motive Gear – Differential Crush Sleeve (Part No.14012691)
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – Minor Install Kit For GM 8.6Irs Rear Differential (Part No.12085)
from
$192.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (with Supershims).
Product Features:
See More
Product Features:
- Fits GM 8.6″ IRS Camaro
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
Top Picks for 2011 Chevrolet Camaro Transfer Cases
Upgrade Chevrolet Camaros with top-quality Transfer Cases parts, including 5 OEM and aftermarket selections for your 2011 model.
National – Bearing Race (Part No.14276)
from
$8.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi Purpose Seal (Part No.7412S)
from
$4.99
Product Features:
See More
- Design type: spring loaded; single-lip
- Temperature range: -40 deg. F to 225 deg. F / -40 deg. C to 107 deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Shaft Repair Sleeve (Part No.99196)
from
$33.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Yukon Gear – 2010 & Up V8 Camaro 218Mm / GM 8.6Irs Axle Seal (Part No.30287)
National – Shaft Repair Sleeve (Part No.99210)
from
$47.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Top-Rated Drivetrains Brands For Your 2011 Chevrolet Camaro
Shop for the best-rated brands offering Drivetrains and other products for your 2011 Chevrolet Camaros. Below you’ll find some of our best rated Drivetrains from Valvoline, National, and Driveworks, and more. Drivetrains from these brands that fit a 2011 Camaro start at just $8.99 and are rated as high as 4.8 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.
Popular Valvoline 2011 Chevrolet Camaro Drivetrains
When it comes to maintaining or upgrading your 2011 Chevrolet Camaro, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 2011 Chevrolet Camaro. With over 1 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $35.99. Plus, with over 446 customer reviews and an average rating of 4.8 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$35.99
(446)
MaxLife Multi-Vehicle Automatic Transmission Fluid, 1 Gallon
“Good quality great price”
Popular National 2011 Chevrolet Camaro Drivetrains
National auto parts is one of the highest quality Drivetrain brands in the market. Any 2011 Chevrolet Camaro owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2011 Camaro, Advance Auto Parts carries a full inventory of 3 National Drivetrains. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these National Drivetrains range from $8.99 to $39.99, plus, with more than 4 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.
from
$39.99
(1)
Shaft Repair Sleeve
“used these speedy sleeves on the front axle of my Kubota with the wheel seals,saved me from spending 15 times more on the axle’s, Thank’s”
FAQs for 2011 Chevrolet Camaro Drivetrains
Which Drivetrains are best-sellers for 2011 Chevrolet Camaros?
Out of 65 Drivetrains that fit 2011 Chevrolet Camaros, the following parts are the top sellers:
- Taper Bearing Set (5050529) – $9.99
- 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (11645418) – $57.99
- Differential Shaft Lock Bolt (5707714) – $6.79
What’s the price range for 2011 Chevrolet Camaro Drivetrains?
Drivetrain prices for the 2011 Chevrolet Camaro start at $2.99 and go up to $1,566.99 for the most premium parts.
What’s the average price of a Drivetrain for a 2011 Chevrolet Camaro?
The average price for Drivetrains for the 2011 Chevrolet Camaro is $199.84. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Drivetrains for other Chevrolet Camaro model years?
What are the cheapest Drivetrains for my 2011 Chevrolet Camaro?
The cheapest 2011 Chevrolet Camaro Drivetrains we carry in stock are:
- Ring Gear Bolt (20520168) – $2.99
- Differential Crush Sleeve (20520169) – $2.99
- Differential Crush Sleeve (10593146) – $3.99
- Multi Purpose Seal (18444966) – $4.99
- Crush Sleeve For GM 7.6" IRS, 8.5", 8.6", 8.75", 8.875" & Nissan Titan Rear – Approx 0.620" Long (11643342) – $5.99
What are the top-rated Drivetrains that fit the 2011 Chevrolet Camaro?
Out of 2,124 reviews by customers, our 2011 Chevrolet Camaro Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2011 Chevrolet Camaro and their top-rated products:
- Transfer Cases
- Bearing Race (3272338) – $8.99
- Multi Purpose Seal (18444966) – $4.99
- Differentials
- Bearing Race (3272338) – $8.99
- Multi Purpose Seal (18444966) – $4.99
- Drive Shafts and Axles
- Bearing Race (3272338) – $8.99
- Multi Purpose Seal (18444966) – $4.99
What types of Drivetrains do you sell for my 2011 Chevrolet Camaro?
As of 3/1/26, these are some of the most in-demand types of Drivetrains for a 2011 Chevrolet Camaro:
Can I get help with 2011 Chevrolet Camaro Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Drivetrains and more.
What is your return policy for Chevrolet Camaro Drivetrains?
Advance Auto Parts keeps returns simple. For new Chevrolet Camaro Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
