2011 Chevrolet Camaro Differentials

Essential 2011 Chevrolet Camaro Differentials

Royal Purple – HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart) (Part No.11744)

HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)

from

$12.99
Royal Purple HMX SAE 5W-30 High-Mileage Synthetic Motor Oil, 1 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity.

Product Features:
  • Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
  • Formulated with robust zinc/phosphorus anti-wear compounds combined with royal purple’s proprietary additive technology
  • Hmx is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
  • Reduces friction and metal-to-metal contact for peak engine performance
  • Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up
  • High-Mileage Formula: Specifically designed for engines with more than 75,000 miles, this full synthetic engine oil helps minimize wear and restore lost performance.
See More

Yukon Gear – Positraction Cross Pin Bolt For GM 12 Bolt Car And Truck (Part No.33344)

Positraction Cross Pin Bolt For GM 12 Bolt Car And Truck

from

$28.99
Positraction cross pin bolt for GM 12P and 12T.

Product Features:
  • Cross pin bolt for GM 12 bolt passenger car and truck
  • For OEM positraction applications only
See More

USA Standard Gear – Master Overhaul Kit For ’10 & Up Camaro With V8 (Part No.37103)

Master Overhaul Kit For '10 & Up Camaro With V8

from

$584.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits GM 8.6″ IRS Camaro
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)

Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette

from

$59.99
Product Features:
  • Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
  • Interlocking design makes installation much easier
See More

National – Shaft Repair Sleeve (Part No.99139)

Shaft Repair Sleeve

from

$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-807046)

Tapered Roller Bearing

from

$42.99
Product Features:
  • Brand may vary by location
See More

Whiteline – Differential Mount Bushing (Part No.W93167)

Differential Mount Bushing

from

$81.99
Whiteline’s differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

Yukon Gear – 7/16" To 3/8" Ring Gear Bolt Spacer Sleeve. (Part No.33056)

7/16" To 3/8" Ring Gear Bolt Spacer Sleeve.

from

$7.99
7/16″ TO 3/8″ ring gear bolt spacer sleeve.

Product Features:
  • Ring gear bolt sleeve
  • Adapts 7/16″ to 3/8″
See More

ACDelco – Diff. Side Cover Sea (Part No.J7041429859ACD)

Diff. Side Cover Sea

from

$19.87
Diff. Side Cover Sea

Energy Suspension – DiffrlBushing (Part No.3.1153R)

DiffrlBushing

from

$55.99
DiffrlBushing

FAG US – TAPERED ROLLER BEARI (Part No.KT45)

TAPERED ROLLER BEARI

from

$24.29
TAPERED ROLLER BEARI

Yukon Gear – Dura Grip Case, GM 7.5 & 7.625", 3.23 & Up (Part No.20106)

Dura Grip Case, GM 7.5 & 7.625", 3.23 & Up

from

$399.99
GM 7.5″ & 7.6″ DURA GRIP case, bare, 3.23 & up, 26spline & 28spline.

Product Features:
  • Dura Grip positraction carrier case
  • Does not include spider gears
  • Fits GM 7.5″ and 7.625″
  • 3.23 and up ratios only
See More

National – Bearings (Part No.M86610)

Bearings

from

$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Bearing Race Driver (Part No.56016)

Bearing Race Driver

from

$188.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM89210 race
  • All steel construction
See More

Yukon Gear – Dana 44 Carrier Installation Kit Replacement (Part No.57003)

Dana 44 Carrier Installation Kit Replacement

from

$128.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 44 differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Dana Spicer 44
  • Includes carrier bearings and races and carrier shim kit
See More

Yukon Gear – 10 & Up V8 Camaro 218Mm / 8.6Irs Pinion Seal (Part No.30290)

10 & Up V8 Camaro 218Mm / 8.6Irs Pinion Seal

from

$56.99
Product Features:
  • Pinion seal
  • Fits GM 8.6″ IRS Camaro
See More

Richmond Gear – RngPnnInstlKt (Part No.83-1044-B)

RngPnnInstlKt

from

$43.99
RngPnnInstlKt

Yukon Gear – Pinion Nut (Part No.33147)

Pinion Nut

from

$26.99
Pinion nut for GM 7.6″ IRS, 8.6″ IRS and some Ford 9.75″, Check threads for proper fit before before installing. 22mm x 1.5mm, Uses 32mm socket.

Product Features:
  • Pinion nut for GM 7.6″ IRS and 8.6″ IRS and some Ford 9.75″
  • 22mm x 1.5 thread
  • 32mm socket
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)

Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80

from

$13.99
Product Features:
  • Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80
See More

Yukon Gear – Master Overhaul Kit For ’10 & Up Camaro With V8 (Part No.14169)

Master Overhaul Kit For '10 & Up Camaro With V8

from

$637.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits GM 8.6″ IRS Camaro
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, side seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush, and silicone.
See More

Yukon Gear – Master Overhaul Kit For GM 8.5" Differential With Aftermarket Positraction (Part No.14088)

Master Overhaul Kit For GM 8.5" Differential With Aftermarket Positraction

from

$309.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit is used in 8.5″ differentials using a Yukon Dura Grip, Eaton posi, ValueTrac, True Trac, Pro-Series Auburn, Detroit Locker or standard carrier with large bearing journals. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. Includes Supershims.

Product Features:
  • Fits GM 8.5″ rear with aftermarket positraction
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1104)

Differential Pinion Shim Kit

from

$12.99


Product Features:
  • KIT SHIM
See More

Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck

from

$39.99
8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

Product Features:
  • Pinion depth shim kit for Toyota 7.5″, 8″ and V6
See More

Richmond Gear – RngPnn (Part No.79-0072-1)

RngPnn

from

$513.99
RngPnn

Motive Gear – Differential Ring and Pinion (Part No.D44-589)

Differential Ring and Pinion

from

$223.99


Product Features:
  • DANA 44 R&P 5:89 RATIO STD CUT
See More

Yukon Gear – Crush Sleeve (Part No.33099)

Crush Sleeve

from

$13.99
Crush Sleeve for Chrysler 9.25″ front, GM 8.6″ IRS, 9.25″ IFS & 9.5″. Approx 0.640″ long.

Product Features:
  • Crush sleeve for Chrysler 9.25″ front, GM 8.6″ IRS, 9.25″ IFS and 9.5″
  • 0.640″ tall
See More

Yukon Gear – Crush Sleeve (Part No.33093)

Crush Sleeve

from

$10.99
Crush Sleeve for Model 35, Chrysler 7.25″, 8.25″ Ford 8″ & GM 7.75″. Approx 0.495″ long.

Product Features:
  • Crush sleeve for AMC Model 35, Chrysler 7.25″ and 8.25″, Ford 8″ and GM 7.75″
  • 0.495″ tall
See More

2011 Chevrolet Camaro Differentials

Maybe you’re in the middle of a full rebuild of that 2011 Chevrolet Camaro. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 56 different Differentials in our inventory ranging from $2.49 to $1,566.99. That means you can find the exact parts or products you need to keep that 2011 Chevrolet Camaro running smoothly.

Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 2011 Chevrolet Camaro. Valvoline, Royal Purple, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2011 Chevrolet Camaro, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Differentials to keep your 2011 Chevrolet Camaro rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2011 Chevrolet Camaro Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2011 Chevrolet Camaro demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Camaro the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular National Differentials

We carry National parts in our stock across Pinion Shaft Seals and Differential Bearings categories, plus more. For a 2011 Chevrolet Camaro, our most popular National Differentials include:
Shaft Repair Sleeve
from $39.99
(1)
Shaft Repair Sleeve
Pinion Shaft Seals
Taper Bearing Cup
from $10.99
(1)
Taper Bearing Cup
Differential Bearings

FAQs for 2011 Chevrolet Camaro Differentials

What are the most purchased Differentials for the 2011 Chevrolet Camaro?

Out of 56 Differentials for the 2011 Chevrolet Camaro, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
Differential Pinion Shaft Lock Bolts