2011 Cadillac Escalade ESV Transmission Parts

Below you will find various in-demand Cadillac Transmission Parts, components and accessories for your 2011 Escalade ESV. Advance Auto Parts has popular Escalade ESV parts like Automatic Transmission Parts, Transmission Seals, Transmission Bearings and more. You’ll also find aftermarket and OEM Transmission Parts for other Escalade ESV model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2011 Cadillac Escalade ESV Transmission Parts below and start saving instantly.

Popular 2011 Cadillac Escalade ESV Transmission Parts Categories

Automatic Transmission Shift Linkage Bushings

Transmission Torque Converters

OE Transmission Coolers

Manual Transmission Differential Bearings

Torque Converter Hardware

Transmission Oil Cooler Lines

Transmission Shift Cables

Transmission Pan Gaskets

Automatic Transmission Drain Plugs

Shift Interlock Solenoids

Automatic Transmission Line Connectors

Pinion Bearings

Transmission Mounts

Back Up and Neutral Safety Switches

Transmission Oil Pan Gaskets

Transmission Dipsticks

Speed Sensors

Automatic Transmission Differential Bearings

Axle Intermediate Shaft Seals

Pinion Seals

Transmission Seals and O-rings

Back Up Light Switch Connectors

Torque Converter Seals

Automatic Transmission Oil Cooler Gaskets

Input Shaft Bearings

Back Up Lamp Connectors

Automatic Transmission Flexplate Mounting Bolts

Shift Shaft Seals

Manual Transmission Extension Housing Seals

Remanufactured Automatic Transmissions

Manual Transmission Bearing

Essential Transmission Parts for 2011 Cadillac Escalade ESVs

from

$24.49

Fixing a broken automatic transmission shift cable usually requires replacing the entire cable assembly. This Dorman OE FIX shift cable bushing kit saves expense by allowing the replacement of just the failed bushing.

Product Features:

Convenient solution – this shift cable bushing kit directly replaces a broken bushing and eliminates the need to replace the entire cable assembly
Save time and money – save the expense and significant installation time of replacing an entire cable assembly
Ensure fit – this bushing kit is vehicle-specific and precision-engineered for specified General Motors and Chrysler models and years
Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

from

$17.49

Ditch the wrenches and rags and get this Dorman Twist Drain oil drain plug. It’s specially designed to simplify changing your oil by replacing your factory plug with a tool-free, clean and easy solution. Just push, twist and drain. It also features a custom tapered O-ring that ensures a leak-proof seal, and is finished with electrophoresis and anodization for rust resistance.

Product Features:

Simplifies service – this trademark Dorman Twist Drain plug replaces the original equipment oil drain plug and allows for cleaner and easier oil changes
Tool-free solution – eliminates need for wrench to drain oil pan; simply push, twist and drain
Leak resistant – proprietary inner seal handles high pressure and temperature to prevent leaks
Corrosion resistant – specially coated to avoid rust for a long service life

from

$36.99

REUSABLE AT PAN GSKT

from

$203.99

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:

Fluid Balanced

from

$15.29

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$13.99

AT OIL PAN GASKET

from

$10.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$31.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$8.99

Made of quality materials, this automatic transmission oil cooler line connector matches the fit and function of a damaged original equipment connector to restore leak-free performance between the transmission and the oil cooler.

Product Features:

Quality replacement – this transmission cooler connector matches the fit and function of the original equipment connector
Durable construction – this oil cooler line connector is made of quality materials for a precise fit and leak-free durability
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Ideal shop supply – this connector is recommended to have on hand any time service is being performed on the transmission oil cooler line

from

$38.99

Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. That is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating. Complete with washers and nuts where applicable.

Product Features:

Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter
Flanged Nut
Increased Strength And Improved Flywheel Register
0.88″ Underhead Length
Set of 6
200,000 PSI
1-PC Rear Main

from

$25.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$10.49

This torque converter hardware is designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this torque converter hardware is designed to match the fit and function of the original hardware on specified vehicles
Ideal solution – this hardware is a reliable replacement for original hardware that has failed due to fatigue
Durable construction – this hardware is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$12.49

This Dorman Automatic Transmission Oil Cooler Gasket eliminates leaks where the oil cooler line connects to the transmission. Gasket may break down over time, causing leaks, and should be replaced any time the oil cooler line and transmission are separated.

Product Features:

Durable construction – rubber over steel construction creates a positive seal and retains its shape
Direct replacement – fits and functions like original equipment
Easy to install – direct-fit, no special tools required
Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance

from

$16.29

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$14.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$16.99

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$32.99

This shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$23.79

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$29.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$17.79

Product Features:

Brand may vary by location

from

$81.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$6.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$34.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$2882.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$44.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$16.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$64.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Neutral Safety Switch prevents the engine from starting unless the transmission is in neutral or park, enhancing safety by reducing the risk of accidental movement while starting the vehicle. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$18.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CADI 00-20; CHEV 91-21; GMC 91-21;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1991-2021
Weight approx: 2 Lbs
MATERIAL: RUBBER, STEEL
HEIGHT: 2.06 INCH / 52.32 MM
STUD: M10x1.5 1.15 INCH / 29.21 MM

Upgrade your 2011 Cadillac Escalade ESV with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2011 Cadillac Escalade ESV, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Transmission Parts are key to keeping your Escalade ESV functioning at its best. At Advance Auto Parts, we offer a wide selection of 66 Transmission Parts for the 2011 Cadillac Escalade ESV, designed to meet your needs without breaking the bank. From Automatic Transmission Part replacements to Transmission Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2011 Cadillac Escalade ESV at great prices. Our Transmission Parts inventory for this model ranges from just $4.99 to $3,166.00, with an average price of $396.61. Our 66 Transmission Parts in stock come from 19 trusted brands, so you’re sure to find the right part for your 2011 Cadillac Escalade ESV without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Cadillac Escalade ESV, we stock popular OEM and aftermarket Transmission Parts from top names like National, Dorman, Imperial, and more. National Transmission Parts start at just $14.99 and boast an impressive 4.3 stars average rating from customers. Dorman and Imperial also bring quality to the table, with Transmission Parts available starting at $8.99, and at an average 4.2 stars rating. With 776 customer reviews and counting, our 2011 Cadillac Escalade ESV Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2011 Cadillac Escalade ESV is always ready to roll. We’re committed to providing you with everything you need to keep your Escalade ESV in top shape, all in one place. Start shopping confidently below for your 2011 Cadillac Escalade ESV!

Best-Selling Automatic Transmission Parts for 2011 Cadillac Escalade ESVs

Enhance the driving experience in your Cadillac with 11 quality Automatic Transmission Part components, starting at $24.49.

show more show less

from

$24.99

This automatic transmission dipstick is designed to match the fit and function of the original dipstick on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this automatic transmission dipstick is designed to match the fit and function of the original dipstick on specified vehicles
Restores functionality – reliable replacement for an original dipstick that has bent or broken due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$24.49

Convenient solution – this shift cable bushing kit directly replaces a broken bushing and eliminates the need to replace the entire cable assembly
Save time and money – save the expense and significant installation time of replacing an entire cable assembly
Ensure fit – this bushing kit is vehicle-specific and precision-engineered for specified General Motors and Chrysler models and years
Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

from

$32.99

Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3166.00

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.

Product Features:

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.
With Mobil 1 Fluid

from

$3165.00

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.
With Mobil 1 Fluid

from

$2882.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$2869.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2857.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). [Torque Converter] All of converters are dynamic balanced All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2849.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$2849.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2612.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Top Picks for 2011 Cadillac Escalade ESV Transmission Bearings

Upgrade Cadillac Escalade ESVs with top-quality Transmission Bearings parts, including 6 OEM and aftermarket selections for your 2011 model.

show more show less

from

$14.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$23.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$16.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$44.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$34.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$23.79

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

In-Demand Transmission Mounts for 2011 Cadillac Escalade ESVs

Select from 3 premium Transmission Mounts parts for your 2011 Cadillac Escalade ESV, with prices ranging from $18.99 to $90.99.

show more show less

from

$18.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1991-2021
Weight approx: 2 Lbs
MATERIAL: RUBBER, STEEL
HEIGHT: 2.06 INCH / 52.32 MM
STUD: M10x1.5 1.15 INCH / 29.21 MM

from

$23.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CADI 99-14; CHEV 82-19; GMC 82-14; HUMMER 03-10; ISUZU 06-08; OLDS 91-94;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1982-2019
Weight approx: 5 Lbs
STUDS: M10-150
INTERLOCK
BOLT HOLES CENTERLINE: 7.5 INCH / 190.5 MM

from

$90.99

A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:

Unique Safety Interlock Design
Impervious to Vehicle Oils and Chemicals
Strong Enough Too Handle High Performance

Most Sold 2011 Cadillac Escalade ESV Transmission Cooler and Parts

Explore our best-selling Cadillac parts for the 2011 Escalade ESV among 13 OEM and aftermarket options starting from $25.99.

show more show less

from

$31.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

Product Features:

Imperial Maxi-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$85.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
33% more efficient than a comparable tube and fin design

from

$163.99

This automatic transmission oil cooler is designed to match the function of an original cooler on specified vehicles. It is engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion, or damage.

Product Features:

Direct replacement – this automatic transmission fluid cooler is designed to match the function of an original cooler on specified vehicle
Ideal solution – engineered to help maintain proper transmission fluid temperature when an original cooler has failed from heat, corrosion or damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$83.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$95.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$67.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

Top-Rated Transmission Parts Brands For Your 2011 Cadillac Escalade ESV

Shop for the best-rated brands offering Transmission Parts and other products for your 2011 Cadillac Escalade ESVs. Below you’ll find some of our best rated Transmission Parts from National, Dorman, and Imperial, and more. Transmission Parts from these brands that fit a 2011 Escalade ESV start at just $8.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 2011 Cadillac Escalade ESV Transmission Parts

When it comes to maintaining or upgrading your 2011 Cadillac Escalade ESV, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 2011 Cadillac Escalade ESV. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.99, with an average price of just $31.49. Plus, with over 13 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $43.99

(2)

Shaft Repair Sleeve

“As a mechanic I dont have time or money to waste on inferior products, which this is not. Great product,great price”

from $14.99

(3)

Bearing Race

“Used on my diesel truck”

from $35.49

(8)

Multi-Purpose Seal

“Nicely made. Heavy duty-just like factory parts.”

Popular Dorman 2011 Cadillac Escalade ESV Transmission Parts

Dorman auto parts is one of the highest quality Transmission Part brands in the market. Any 2011 Cadillac Escalade ESV owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2011 Escalade ESV, Advance Auto Parts carries a full inventory of 3 Dorman Transmission Parts. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Dorman Transmission Parts range from $8.99 to $31.99, plus, with more than 9 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $8.99

(5)

Transmission Line Connector – 3/8 in OD Tube x 9/16-18 UNF Thread

“Put on my 2004 silverado”

from $24.99

(1)

Transmission Oil Dipstick: Direct Replacement, Steel

“In stock.Great price.”

from $31.99

(3)

Transmission Oil Cooler Line

“Great fit”

FAQs for 2011 Cadillac Escalade ESV Transmission Parts

Which Transmission Parts are best-sellers for 2011 Cadillac Escalade ESVs?

Out of 66 Transmission Parts that fit 2011 Cadillac Escalade ESVs, the following parts are the top sellers:

Transmission Mount: Rear, 1 Piece (5303486) – $23.49
Transmission Mount: Rear, 1 Piece (19300302) – $18.99
Torque Convertor Bolts (11839775) – $10.49

What’s the price range for 2011 Cadillac Escalade ESV Transmission Parts?

Transmission Part prices for the 2011 Cadillac Escalade ESV start at $4.99 and go up to $3,166.00 for the most premium parts.

What’s the average price of a Transmission Part for a 2011 Cadillac Escalade ESV?

The average price for Transmission Parts for the 2011 Cadillac Escalade ESV is $396.61. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Cadillac Escalade ESV model years?

Yes, we currently carry Transmission Parts for 20 model years of Cadillac Escalade ESVs between 2003 and 2024. Transmission Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Transmission Parts for my 2011 Cadillac Escalade ESV?

The cheapest 2011 Cadillac Escalade ESV Transmission Parts we carry in stock are:

Multi-Purpose Seal (99997207) – $4.99
Multi-Purpose Seal (18442932) – $6.99
Transmission Line Connector – 3/8 in OD Tube x 9/16-18 UNF Thread (10916185) – $8.99
Torque Convertor Bolts (11839775) – $10.49
Multi-Purpose Seal (11035563) – $10.99

What are the top-rated Transmission Parts that fit the 2011 Cadillac Escalade ESV?

Out of 776 reviews by customers, our 2011 Cadillac Escalade ESV Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2011 Cadillac Escalade ESV and their top-rated products:

Automatic Transmission Pan and Gaskets
- EZ Drain Engine Oil Drain Plug: M12-1.75 Thread, 21 mm Head, 1 Pack (11953660) – $17.49
Transmission Cooler and Parts
- EZ Drain Engine Oil Drain Plug: M12-1.75 Thread, 21 mm Head, 1 Pack (11953660) – $17.49

What types of Transmission Parts do you sell for my 2011 Cadillac Escalade ESV?

As of 11/2/25, these are some of the most in-demand types of Transmission Parts for a 2011 Cadillac Escalade ESV:

Can I get help with 2011 Cadillac Escalade ESV Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Transmission Parts and more.

What is your return policy for Cadillac Escalade ESV Transmission Parts?

Advance Auto Parts keeps returns simple. For new Cadillac Escalade ESV Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2011 Cadillac Escalade ESV Transmission Parts

Dorman – Help – Shift Cable Bushing Kit (OE Fix) (Part No.14104)

Dorman – EZ Drain Engine Oil Drain Plug: M12-1.75 Thread, 21 mm Head, 1 Pack (Part No.092-018)

ATP – REUSABLE AT PAN GSKT (Part No.JG-142)

Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.GM88H)

FAG US – Shaft Seal (Part No.SS2332)

ATP – AT OIL PAN GASKET (Part No.SG-30)

National – Multi-Purpose Seal (Part No.710597)

Carquest Premium – Multi-Use Connector (Part No.PTA1078)

Dorman – Transmission Line Connector with 3/8 Tube X 1/4-18 In. Thread (Part No.800-604)

ARP Auto Racing – For Use With Gen Iii/ Ls Series Chevy Small Block, 0.880" Under Head L (Part No.244-2901)

GM Genuine Parts – Multi-Purpose Pigtail Kit (Part No.PT3786)

Dorman – Help – Torque Convertor Bolts (Part No.14099)

Dorman – Help – Transmission Oil Cooler Seal (Part No.66219)

National – Multi-Purpose Seal (Part No.710533)

National – Bearing Race (Part No.M802011)

Motive Gear – Differential Pinion Seal (Part No.26064028)

Dorman – Transmission Shift Interlock Solenoid (Part No.924-977)

FAG US – Cone (Part No.KLM603049)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-153)

Driveworks – Transfer Case Output Shaft Seal (Part No.S-4503N)

Carquest Premium – ABS sensor (Part No.ARA1019)

National – Multi-Purpose Seal (Part No.4950)

FAG US – Bearing – TRB (Tapered Roller Bearing) (Part No.KT36)

Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T6L80E1890T4)

National – Multi-Purpose Bearing (Part No.109)

Driveworks – Taper Bearing Set (Part No.S-A-36)

Carquest Premium – Neutral Safety Switch (Part No.CSC1705)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2811)

Dorman – Help – Transmission Oil Dipstick: Direct Replacement, Steel (Part No.921-049)

Dorman – Help – Shift Cable Bushing Kit (OE Fix) (Part No.14104)

Dorman – Transmission Shift Interlock Solenoid (Part No.924-977)

Spartan – Automatic Transmission Assembly; GM RWD 6L80 6-Speed Billet Converter With Mobil 1 Fluid (Part No.8111A-JMB)

Spartan – Automatic Transmission Assembly; GM 4WD 6L80 6-Speed Billet Converter With Mobil 1 Fluid (Part No.8108A-JMB)

Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T6L80E8304T4)

Shift Pro by ETE – 6L80 Automatic Transmission Assembly (Part No.T282006)

Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T6L80E8304T2)

Moveras – 6L80 – Automatic Transmission (Part No.M01845)

Shift Pro by ETE – 6L80 Automatic Transmission Assembly (Part No.T282007)

Moveras – 6L80 – Automatic Transmission (Part No.M01884)

National – Multi-Purpose Seal (Part No.710536)

National – Multi-Purpose Seal (Part No.710507)

National – Multi-Purpose Seal (Part No.710636)

National – Multi-Purpose Seal (Part No.710830)

Driveworks – Transfer Case Output Shaft Seal (Part No.S-4503N)

National – Multi-Purpose Seal (Part No.710545)

National – Multi-Purpose Seal (Part No.330385)

National – Multi-Purpose Seal (Part No.710533)

FAG US – Shaft Seal (Part No.SS2332)

National – Bearing Race (Part No.M802011)

National – Tapered Roller Bearing Cone (Part No.M802048)

Driveworks – Taper Bearing Set (Part No.S-A-36)

National – Multi-Purpose Bearing (Part No.109)

FAG US – Bearing – TRB (Tapered Roller Bearing) (Part No.KT36)

FAG US – Cone (Part No.KLM603049)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2811)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2638)

Energy Suspension – Transmission Mount (Part No.3.1129R)

Dorman – Transmission Oil Cooler Line (Part No.624-710)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243012)

Dorman – Transmission Oil Cooler (Part No.918-213)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.241018)

Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-994)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242016)