2010 Toyota Tundra Exhaust Parts

Essential 2010 Toyota Tundra Exhaust Parts

Flowmaster Inc. – Super 50 Muffler, 2.5in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound (Part No.8524553)

Super 50 Muffler, 2.5in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound

from

$206.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:
  • Mild to stock exterior exhaust tone
  • Minimal interior resonance
  • Excellent choice for large displacement vehicles
  • Improved horsepower, torque and potential mileage improvement
See More

Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.56209)

Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed

from

$213.99
Combining the only broad-market stainless-steel construction with a direct fit OE-style replacement, Walker® Quiet-Flow® SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.

Product Features:
  • CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15305)

Street Series Cat-Back Performance Exhaust System

from

$1159.99
The MagnaFlow 2014-2021 Toyota Tundra Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.6L, 5.7L 2014-2021 Toyota Tundra with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Rolled Edge tips, this Toyota Tundra exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tundra’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15305 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15305 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

aFe POWER – MACH Force-Xp Cat Back Exhaust System: Black Tip, 409 Stainless Steel, Unleashes All Available HP (Part No.49-46006-B)

MACH Force-Xp Cat Back Exhaust System: Black Tip, 409 Stainless Steel, Unleashes All Available HP

from

$865.99
The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:
  • 3 in. Mandrel Bent 409 Stainless Steel Tubing
  • Hassle Free Installation
  • Free-Flow Muffler
  • Aggressive Sound
See More

JBA Performance – 2013S 1 1/2" Header Shorty Stainless Steel 07-09 Toyota Tundra 4.7L (Part No.2013S)

2013S 1 1/2" Header Shorty Stainless Steel 07-09 Toyota Tundra 4.7L

from

$765.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:
  • JBA Performance Exhaust 2013S 1 1/2″ Header Shorty Stainless Steel 07-09 Toyota Tundra 4.7L
  • Mandrel bent stainless steel tube
See More

Flowtech – Shorty Smog Headers (Part No.91730FLT)

Shorty Smog Headers

from

$499.99
Shorty Smog Headers

Walker – Clamp V-Band Bolt Dia 0.3125 Length Nut Type Hex Pipe Dia 3.162 (Part No.36542)

Clamp V-Band Bolt Dia 0.3125 Length Nut Type Hex Pipe Dia 3.162

from

$13.29
Complete your exhaust repair with a Walker® V band clamp. Featuring a T-bolt latch design for superior clamping and sealing, Walker hardware is manufactured from durable and robust material for long service life.

Product Features:
  • SUPERIOR SEAL — T-bolt latch design for superior clamping and sealing
  • OE DESIGN — Designed with OE-style features for secure fit
  • THE RIGHT CONNECTION — For use with flared connectors
  • PREMIUM MATERIALS – Made from robust material for durability and long life
  • BETTER TOGETHER — Use Walker® accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

BRExhaust – Exhaust Clamp (Part No.255-1007)

Exhaust Clamp

from

$13.79
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.

Product Features:
  • whilst developing the exhaust system
  • BRExhaust also develops the installation hardware to the same standards.
  • Manufactured from quality materials to ensure maximum durability
  • Proper fit and functionality to finish your install
  • Perfect, gas-tight performance
  • Exhaust accessory that facilitates a complete installation process.
  • Built to OEM specifications
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.61124)

Exhaust Pipe Flange Gasket

from

$12.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Walker – Donut Exhaust Pipe Flange Gasket: Fiber, Heat Resistant, Premium Materials (Part No.31332)

Donut Exhaust Pipe Flange Gasket: Fiber, Heat Resistant, Premium Materials

from

$4.49
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust 35473 Exhaust System Hanger Insulator (Part No.35473)

Exhaust 35473 Exhaust System Hanger Insulator

from

$10.29
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust 35017 Exhaust System Hanger Insulator (Part No.35017)

Exhaust 35017 Exhaust System Hanger Insulator

from

$14.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust 35725 Exhaust System Hanger Insulator (Part No.35725)

Exhaust 35725 Exhaust System Hanger Insulator

from

$6.99
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Donut Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials (Part No.31374)

Donut Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials

from

$5.29
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.52573)

OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$650.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52573. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2005-2006 Toyota Tundra and interchanges with OE part 17410-0P010. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.83603)

CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed

from

$713.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:
  • CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
  • SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
See More

Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.83402)

CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed

from

$437.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:
  • CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
  • SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
See More

Ishino – Exhaust Manifold Gasket (Part No.A8111161191ISH)

Exhaust Manifold Gasket

from

$98.87
Exhaust Manifold Gasket

Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66080)

Seal-4-Good Header Flange Gasket

from

$48.99
Seal-4-Good Header Flange Gasket

Felpro – Exhaust Manifold Gasket Set (Part No.MS 97029)

Exhaust Manifold Gasket Set

from

$51.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

BRExhaust – Direct-Fit Premium Resonator Assembly (Part No.228-121)

Direct-Fit Premium Resonator Assembly

from

$230.99
BRExhaust direct-fit exhaust resonators are designed to install easily and help you retain the OE exhaust sound you are looking for. The resonator is engineered to optimally reduce unwanted noises and backpressure while protecting against corrosion. Aluminized steel construction ensures maximum durability.

Product Features:
  • Direct-fit configuration
  • Saves installation time by eliminating the need for the labor intensive bending and welding required with split system exhaust components
  • Optimal noise reduction
  • Low backpressure and corrosion protection
  • Constructed using 16-gauge aluminized steel
  • Aluminized steel construction for maximum durability
  • Constructed to help reduce flex and withstand vehicle vibration
See More

BRExhaust – Direct-Fit Premium Resonator Assembly (Part No.228-825)

Direct-Fit Premium Resonator Assembly

from

$220.99
BRExhaust direct-fit exhaust resonators are designed to install easily and help you retain the OE exhaust sound you are looking for. The resonator is engineered to optimally reduce unwanted noises and backpressure while protecting against corrosion. Aluminized steel construction ensures maximum durability.

Product Features:
  • Direct-fit configuration
  • Saves installation time by eliminating the need for the labor intensive bending and welding required with split system exhaust components
  • Optimal noise reduction
  • Low backpressure and corrosion protection
  • Constructed using 16-gauge aluminized steel
  • Aluminized steel construction for maximum durability
  • Constructed to help reduce flex and withstand vehicle vibration
See More

BRExhaust – Direct-Fit Premium Muffler Assembly (Part No.286-393)

Direct-Fit Premium Muffler Assembly

from

$299.99
This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle¿while the interior design of the muffler box ensures quiet performance.

Product Features:
  • Based on the original OEM design for a guaranteed perfect fit
  • No welds inside the silencer
  • Easy installation
  • Aluminized steel construction for maximum durability
  • Constructed to reduce flex and withstand vehicle vibration
  • External drain hole extends muffler life by allowing moisture to escape
  • Uniform flow holes facilitate even distribution of exhaust flow through the muffler’s interior
See More

JBA Performance – 2011SY 2 1/4" Stainless Steel Mid-Pipe 05-06 Tundra Y Pipe (Part No.2011SY)

2011SY 2 1/4" Stainless Steel Mid-Pipe 05-06 Tundra Y Pipe

from

$367.99
JBA 409 series stainless steel mid-pipes are the perfect compliment to your JBA Headers or JBA Exhaust system. These systems open up the flow on exhaust systems for a dramatic increase in performance and improved sound. They are available for many popular

Product Features:
  • JBA Performance Exhaust 2011SY 2 1/4″ Stainless Steel Mid-Pipe 05-06 Tundra Y Pipe
  • O2 sensor provisions where required
See More

Dynomax – 53699 Exhaust Intermediate Pipe (Part No.53699)

53699 Exhaust Intermediate Pipe

from

$83.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS – Made from stainless steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Walker – Tail Pipe Aluminized 47.25" (Part No.54747)

Tail Pipe Aluminized 47.25"

from

$79.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

BRExhaust – Direct-Fit Premium Tail Pipe (Part No.800-165)

Direct-Fit Premium Tail Pipe

from

$127.99
If you are looking for a replacement exhaust pipe that will fit and perform exactly like the stock one and last even longer, this pipe is engineered to meet OE specs to ensure precise, factory-like fit, performance and reliability. This part features a direct-fit design to enable easy installation. BRExhaust exhaust pipes are designed for easy bolt-on installations. The use of mandrel-bent steel of at least 16-gauge thickness eliminates the need for flow-resistant wrinkle bends, thereby enhancing overall exhaust performance.

Product Features:
  • Bolt-on installation
  • Direct-fit replacement
  • Produced using precision-manufacturing for easy fitment
  • High quality, durable steel construction
  • Protects against corrosion to allow for a long service life
  • Fully aluminized
  • Easy bolt-on installation
See More

Walker – Tail Pipe Aluminized 53.5" (Part No.55548)

Tail Pipe Aluminized 53.5"

from

$80.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

2010 Toyota Tundra Exhaust Parts

You count on your 2010 Toyota Tundra to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 55 Exhaust Parts ranging in price from $2.49 to $1,474.99, you’re sure to find everything you need for your 2010 Toyota Tundra.

Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 12 different brands like Walker, Felpro, and Mahle. 2010 Toyota Tundra Exhaust Parts start as low as $2.49!

One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,250 extensive product reviews on 2010 Toyota Tundra Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials with 5.0 stars and 50 Series Muffler, 2.25in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound with 5.0 stars.

Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 2010 Toyota Tundra below to get started!

Top-Rated Exhaust Parts Brands For Your 2010 Toyota Tundra

Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2010 Toyota Tundra running right for years to come. In our inventory you’ll find brands like Walker, Felpro, Mahle, and even more.

Popular Felpro Exhaust Parts

You’ll find popular Felpro brand products across Exhaust Pipes. All are waiting to get your 2010 Toyota Tundra back on the road. Some of the top-rated Felpro products in these categories are:
Exhaust Pipe Flange Gasket
from $7.79
(1)
Exhaust Pipe Flange Gasket
Exhaust Pipe and Flange Gaskets

Top-Rated Walker Exhaust Parts


If Walker are what you’re looking for, our inventory holds plenty. We stock Walker brand Exhaust Parts for your 2010 Toyota Tundra, and some of our most reviewed Walker parts include:
Donut Exhaust Pipe Flange Gasket: Fiber, Heat Resistant, Premium Materials
from $4.49
(38)
Donut Exhaust Pipe Flange Gasket: Fiber, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
Exhaust 35725 Exhaust System Hanger Insulator
from $6.99
(21)
Exhaust 35725 Exhaust System Hanger Insulator
Exhaust System Insulators

FAQs for 2010 Toyota Tundra Exhaust Parts

What are the most purchased Exhaust Parts for the 2010 Toyota Tundra?

Out of 55 Exhaust Parts for the 2010 Toyota Tundra, the most popular in our inventory are:
Donut Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials
from $16.99
(2)
Donut Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
Catalytic Converter- EPA Ultra, Universal/ Fabrication Needed
from $179.99
(13)
Catalytic Converter- EPA Ultra, Universal/ Fabrication Needed
Catalytic Converters
Clamp V-Band Bolt Dia 0.3125 Length Nut Type Hex Pipe Dia 3.162
from $13.29
This product is not rated
Clamp V-Band Bolt Dia 0.3125 Length Nut Type Hex Pipe Dia 3.162
Exhaust Clamps

What are the top-rated 2010 Toyota Tundra Exhaust Parts?

Top-rated Exhaust Parts for your 2010 Toyota Tundra based on customer reviews/ratings are:
Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials
from $12.99
(2)
Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials
“Great fit, worked as expected. I would buy it again”
50 Series Muffler, 2.25in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound
from $185.99
(2)
50 Series Muffler, 2.25in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound
“Just the sound I was looking for. Relatively quiet though the gears and cruising but sounds pretty throaty when stomped on. It difficult to make a 6 c”
Catalytic Converter Gasket
from $11.99
(1)
Catalytic Converter Gasket
“Right parts”