2010 Toyota Tundra Exhaust Manifold and Headers

Essential 2010 Toyota Tundra Exhaust Manifold and Headers

Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-683)

Direct Fit Exhaust Manifold: Without Heat Shield

from

$269.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.

Product Features:
  • Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
  • Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
  • Complete repair – includes all necessary gaskets and downpipe hardware
  • Trustworthy design – built by industry leader in aftermarket manifolds
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.49341)

OEM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$952.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49341. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2011 Toyota Tacoma, 2003-2009 Toyota 4Runner, and more, this direct-fit catalytic converter also interchanges with OE parts 17150-31011 and 17150-31250, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

JBA Performance – 2011S 1 1/2" Header Shorty Stainless Steel 05-06 Tundra/Sequoia 4.7L (Part No.2011S)

2011S 1 1/2" Header Shorty Stainless Steel 05-06 Tundra/Sequoia 4.7L

from

$912.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:
  • JBA Performance Exhaust 2011S 1 1/2″ Header Shorty Stainless Steel 05-06 Tundra/Sequoia 4.7L
  • Mandrel bent stainless steel tube
See More

Flowtech – Shorty Smog Headers (Part No.91730FLT)

Shorty Smog Headers

from

$499.99
Shorty Smog Headers

Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-710)

Direct Fit Exhaust Manifold: With Heat Shield

from

$225.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.

Product Features:
  • Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
  • Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
  • Complete repair – includes all necessary gaskets and downpipe hardware
  • Trustworthy design – built by industry leader in aftermarket manifolds
See More

JBA Performance – 10-14 Tundra 4.6L (Part No.2014S)

10-14 Tundra 4.6L

from

$794.99
10-14 Tundra 4.6L

Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-711)

Direct Fit Exhaust Manifold: Without Heat Shield

from

$375.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.

Product Features:
  • Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
  • Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
  • Complete repair – includes all necessary gaskets and downpipe hardware
  • Trustworthy design – built by industry leader in aftermarket manifolds
See More

JBA Performance – 2012SJT 1 5/8" Header Shorty Stainless Steel 07-14 Toyota Tundra 5.7L Titanium Ceramic (Part No.2012SJT)

2012SJT 1 5/8" Header Shorty Stainless Steel 07-14 Toyota Tundra 5.7L Titanium Ceramic

from

$985.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:
  • JBA Performance Exhaust 2012SJT 1 5/8″ Header Shorty Stainless Steel 07-14 Toyota Tundra 5.7L Titanium Ceramic
  • Mandrel bent stainless steel tube
See More

MagnaFlow – California Grade CARB Compliant Manifold Catalytic Converter (Part No.5481342)

California Grade CARB Compliant Manifold Catalytic Converter

from

$1488.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5481342. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2011 Toyota Tacoma, 2005-2009 Toyota 4Runner, and more, this direct-fit catalytic converter also interchanges with OE parts 17140-31250 and 17140-31320, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-684)

Direct Fit Exhaust Manifold: With Heat Shield

from

$295.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.

Product Features:
  • Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
  • Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
  • Complete repair – includes all necessary gaskets and downpipe hardware
  • Trustworthy design – built by industry leader in aftermarket manifolds
See More

JBA Performance – 2011SJS 1 1/2" Header Shorty Stainless Steel 05-06 Tundra/Sequoia 4.7L Silver Ceramic (Part No.2011SJS)

2011SJS 1 1/2" Header Shorty Stainless Steel 05-06 Tundra/Sequoia 4.7L Silver Ceramic

from

$1044.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:
  • JBA Performance Exhaust 2011SJS 1 1/2″ Header Shorty Stainless Steel 05-06 Tundra/Sequoia 4.7L Silver Ceramic
  • Mandrel bent stainless steel tube
See More

Dorman – Manifold Converter – Not Carb Compliant – Not For Sale – NY – CA – ME (Part No.674-797)

Manifold Converter - Not Carb Compliant - Not For Sale - NY - CA - ME

from

$595.99
This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:
  • Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
  • Convenient kit – includes gaskets and downpipe hardware to simplify installation
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

JBA Performance – 2011SJT 1 1/2" Header Shorty Stainless Steel 05-06 Tundra/Sequoia 4.7L Titanium Ceramic (Part No.2011SJT)

2011SJT 1 1/2" Header Shorty Stainless Steel 05-06 Tundra/Sequoia 4.7L Titanium Ceramic

from

$1044.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:
  • JBA Performance Exhaust 2011SJT 1 1/2″ Header Shorty Stainless Steel 05-06 Tundra/Sequoia 4.7L Titanium Ceramic
  • Mandrel bent stainless steel tube
See More

JBA Performance – 2013S 1 1/2" Header Shorty Stainless Steel 07-09 Toyota Tundra 4.7L (Part No.2013S)

2013S 1 1/2" Header Shorty Stainless Steel 07-09 Toyota Tundra 4.7L

from

$765.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:
  • JBA Performance Exhaust 2013S 1 1/2″ Header Shorty Stainless Steel 07-09 Toyota Tundra 4.7L
  • Mandrel bent stainless steel tube
See More

2010 Toyota Tundra Exhaust Manifold and Headers

Maybe you’re in the middle of a full rebuild of that 2010 Toyota Tundra. Maybe you just need a couple of Exhaust Manifold and Headers. Either way, Advance Auto Parts has 3 different Exhaust Manifold and Headers in our inventory ranging from $225.99 to $794.99. That means you can find the exact parts or products you need to keep that 2010 Toyota Tundra running smoothly.

Exhaust Manifold and Headers are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 2010 Toyota Tundra. Dorman and JBA Performance are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Exhaust Manifold and Headers for your 2010 Toyota Tundra, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Exhaust Manifold and Headers to keep your 2010 Toyota Tundra rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Exhaust Manifold and Headers Brands To Make Your 2010 Toyota Tundra Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2010 Toyota Tundra demands trusted brand parts and products to keep it running. Many trusted brands of Exhaust Manifold and Headers make up Advance Auto Parts’ inventory, and all are ready to help make your Tundra the best it can be. Be sure to browse some of our top Exhaust Manifold and Headers brands and parts.

FAQs for 2010 Toyota Tundra Exhaust Manifold and Headers

What are the most purchased Exhaust Manifold and Headers for the 2010 Toyota Tundra?

Out of 3 Exhaust Manifold and Headers for the 2010 Toyota Tundra, the most popular in our inventory are:
Direct Fit Exhaust Manifold: With Heat Shield
from $225.99
This product is not rated
Direct Fit Exhaust Manifold: With Heat Shield
Exhaust Manifold and Headers
Direct Fit Exhaust Manifold: Without Heat Shield
from $375.99
This product is not rated
Direct Fit Exhaust Manifold: Without Heat Shield
Exhaust Manifold and Headers
10-14 Tundra 4.6L
from $794.99
This product is not rated
10-14 Tundra 4.6L
Exhaust Manifold and Headers