2010 Toyota Tacoma Exhaust System Kits

This Rebel Series cat-back is designed with dual polished exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 3″ dual MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. In testing, the cat-back exhaust system resulted in gains up to + 9 horsepower and + 16 lbs. x ft. of torque, as measured on our in-house dyno Finishing off this exhaust is a 3-1/2″ diameter polished tip. The tip comes with a laser-cut aFe Power badge riveted on for an aggressive style. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 3-1/2″ Dia. Polished Middle-Side Exit Tips: Finishing off the exhaust are dual 3-1/2″ diameter polished 304 stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. Th e bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• High-Flow Stainless Steel Muffler
• Aggressive Sound
• Complete w/Necessary Hardware

This system fits all wheelbases (ACSB, ACLB, CCSB, CCLB) and produces an astonishing 26 HP and 30lbs. x ft. torque at the wheels. The cat-back design is constructed using 3″ mandrel-bent 409 stainless steel, and includes a free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of the exhaust system helps remove horsepower robbing restriction and keep exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with an aggressive black 304 stainless steel, rolled slash cut tip for an aggressive style.

Product Features:

• 3 in. Mandrel Bent 409 Stainless Steel Tubing
• Hassle Free Installation
• Free Flow Muffler
• Aggressive Sound

Introducing the new aFe Power MACH Force XP dual exhaust system for the 05-09 Ford Mustang V6-4.0L. In recent testing, this system produced 12 horsepower and 16 lbs. x ft. of torque. This exhaust is constructed from 2.5in. mandrel bent, stainless steel and is MIG-welded. Dual high flow, stainless steel, single in, single out mufflers are used to maximize performance across the power band while maintaining a great tone. To finish off this exhaust aFe uses dual, laser etched, 3.5in. polished 304 stainless steel tips. Note: The V8 rear bumper cover is recommended (Ford OE Part Number 5R3Z17K835BAA). The use of the OE V6 bumper cover requires cutting and should be performed by a skilled technician.

Product Features:

• 3 in. Mandrel Bent 409 Stainless Steel Tubing
• Hassle Free Installation
• Free Flow Muffler
• Aggressive Sound

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 2.5 in. Mandrel Bent 409 Stainless Steel Tubing
• Installation Is a Snap
• Leak Free Seal
• Aggressive Sound

The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Features Patented Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increases The Overall Sound Level And Performance
• Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade T-304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

The MagnaFlow 2005-2012 Toyota Tacoma Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.0L 2005-2012 Toyota Tacoma with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 3.5in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this Toyota Tacoma exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tacoma’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16625 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16625 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Features Patented Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increases The Overall Sound Level And Performance
• Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade T-304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

The MagnaFlow 2005-2012 Toyota Tacoma Off-Road Pro Series Cat-Back Performance Exhaust System 17115 brings additional off-roading prowess and our deep signature exhaust note to your 4.0L 2005-2012 Toyota Tacoma with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17115 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Toyota Tacoma exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17115’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17115 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• Available for gas or diesel trucks and SUV’s
• 100% Stainless Steel
• High flow straight through design