2023 Toyota Tacoma Exhaust System Kits

Introducing an all new Rebel Series Dual Center Exit Cat-Back exhaust system for the Jeep Wrangler (JK) with V6-3.6L/3.8L engine. This unique Rebel Series exhaust system is designed with dual center exit tips for an aggressive look. The Tips are 4-1/2″ with aFe power plates and constructed out of stainless steel for durability. This performance cat-back exhaust is constructed of 2-1/2″ MIG-welded mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. In testing, this cat-back exhaust system added an astounding +9 horsepower and +14 lbs. x ft. of torque as verified by our in house dyno. This exhaust system comes complete with a 22″ free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.

Product Features:

• Unique Dual Middle Exit Tips w/Laser Etched Logos
• High Flow Stainless Steel Mufflers
• Aggressive Sound
• Hardware Included

Introducing an all new Rebel Series Dual Center Exit Cat-Back exhaust system for the Jeep Wrangler (JK) with V6-3.6L/3.8L engine. This unique Rebel Series exhaust system is designed with dual center exit tips for an aggressive look. The Tips are 4-1/2″ with aFe power plates and constructed out of stainless steel for durability. This performance cat-back exhaust is constructed of 2-1/2″ MIG-welded mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. In testing, this cat-back exhaust system added an astounding +9 horsepower and +14 lbs. x ft. of torque as verified by our in house dyno. This exhaust system comes complete with a 22″ free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.

Product Features:

• Unique Dual Middle Exit Tips w/Laser Etched Logos
• High Flow Stainless Steel Mufflers
• Aggressive Sound
• Hardware Included

The MagnaFlow 2016-2023 Toyota Tacoma Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.5L 2016-2023 Toyota Tacoma with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Toyota Tacoma exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tacoma’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19293 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19293 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow 2016-2023 Toyota Tacoma Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.5L 2016-2023 Toyota Tacoma with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Toyota Tacoma exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tacoma’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19291 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19291 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

aFe power introduces the MACH Force-Xp cat-back exhaust system for the Toyota Tacoma with V6-3.5L engine. This cat-back exhaust is constructed out of 3 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends and free-flow stainless steel muffler allow for low turbulence, increasing horsepower, torque and improved throttle response. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno. Finishing off this exhaust is a 4.5 diameter black tip. The tip comes with a laser-cut aFe Power badge riveted on for an aggressive style.

Product Features:

• Produces An Astonishing 9 HP And 15 ft./lbs. Torque
• Made From Mandrel Bent Stainless Steel Tubing For Maximum Flow
• High Quality Flange And Band Clamps Improve Sealing Surface
• Straight Through Design Free-Flowing Stainless Steel Muffler

aFe power introduces the MACH Force-Xp cat-back exhaust system for the Toyota Tacoma with V6-3.5L engine. This cat-back exhaust is constructed out of 3 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends and free-flow stainless steel muffler allow for low turbulence, increasing horsepower, torque and improved throttle response. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno. Finishing off this exhaust is a 4.5 diameter black tip. The tip comes with a laser-cut aFe Power badge riveted on for an aggressive style.

Product Features:

• Produces An Astonishing 9 HP And 15 ft./lbs. Torque
• Made From Mandrel Bent Stainless Steel Tubing For Maximum Flow
• High Quality Flange And Band Clamps Improve Sealing Surface
• Straight Through Design Free-Flowing Stainless Steel Muffler

Release the untapped horsepower, torque and sound from your Toyota Tacoma L4-2.7L / V6-3.5L with aFe’s Mach Force Xp exhaust system. Constructed from 2-1/2″ to 3″ mandrel bent 409 stainless steel for improved flow and long-lasting performance, the system is 100% hand MIG-welded by certified craftsmen for race proven strength and durability. The Mach Force Xp system features a high-flow, straight through designed, 409 stainless steel muffler for improved performance gains while delivering an aggressive tone. The Mach Force Xp is finished off with a 4-1/2″ diameter, stainless-steel exhaust tip for a custom look and includes quality hardware and clamps for a hassle-free install. Flow and Performance: This Mach Force-Xp Series exhaust system is constructed of 2-1/2″ and 3″ mandrel bent 409 stainless steel for maximum flow and low turbulence increasing torque, horsepower and improved throttle response. Aggressive Sound: A high-flow, straight through designed 409 stainless steel 18″ length muffler improves performance gains across the power band while producing an aggressive tone. 4-1/2″ Exhaust Tip: Finishing off this system is a 4-1/2″ black, angle-cut, stainless steel exhaust tip w/ laser-cut aFe POWER badge for quality brand recognition and a custom-styled look. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pi pe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit. Installation is a Snap: This Mach Force-Xp exhaust system uses all factory mounting locations providing stability and a hassle-free installation.

Product Features:

• Mandrel Bent 409 Stainless Steel Tubing
• High Flow Straight Thru Muffler For Increased Gains
• 100 Percent Hand MIG-Welded For Long Lasting Quality
• Stainless Steel Exhaust Tip w/aFe Logo

Release the untapped horsepower, torque and sound from your Toyota Tacoma L4-2.7L / V6-3.5L with aFe’s Mach Force Xp exhaust system. Constructed from 2-1/2″ to 3″ mandrel bent 409 stainless steel for improved flow and long-lasting performance, the system is 100% hand MIG-welded by certified craftsmen for race proven strength and durability. The Mach Force Xp system features a high-flow, straight through designed, 409 stainless steel muffler for improved performance gains while delivering an aggressive tone. The Mach Force Xp is finished off with a 4-1/2″ diameter, stainless-steel exhaust tip for a custom look and includes quality hardware and clamps for a hassle-free install. Flow and Performance: This Mach Force-Xp Series exhaust system is constructed of 2-1/2″ and 3″ mandrel bent 409 stainless steel for maximum flow and low turbulence increasing torque, horsepower and improved throttle response. Aggressive Sound: A high-flow, straight through designed 409 stainless steel 18″ length muffler improves performance gains across the power band while producing an aggressive tone. 4-1/2″ Exhaust Tip: Finishing off this system is a 4-1/2″ black, angle-cut, stainless steel exhaust tip w/ laser-cut aFe POWER badge for quality brand recognition and a custom-styled look. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit. Installation is a Snap: This Mach Force-Xp exhaust system uses all factory mounting locations providing stability and a hassle-free installation.

Product Features:

• Mandrel Bent 409 Stainless Steel Tubing
• High Flow Straight Thru Muffler For Increased Gains
• 100 Percent Hand MIG-Welded For Long Lasting Quality
• Stainless Steel Exhaust Tip w/aFe Logo

The MagnaFlow 2016-2023 Toyota Tacoma Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.7L 2016-2023 Toyota Tacoma with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Toyota Tacoma exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tacoma’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19275 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19275 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques