2010 Toyota Tacoma Exhaust Parts

Essential Exhaust Parts for 2010 Toyota Tacomas

Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.47764)

Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed

from

$162.99
Combining the only broad-market stainless-steel body construction with a direct fit OE-style replacement, Walker Quiet-Flow SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.

Product Features:
  • CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler body with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

Walker – Exhaust Pipe Flange Gasket (Part No.31374)

Exhaust Pipe Flange Gasket

from

$5.29
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Ultra EPA Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.93247)

Ultra EPA Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID)

from

$224.99
Designed to comply with EPA emissions requirements while delivering premium performance and durability with assured compliance, Walker Ultra Universal Catalytic Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
See More

Walker – Exhaust Pipe 2.25" Outlet (OD) (Part No.53398)

Exhaust Pipe 2.25" Outlet (OD)

from

$91.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Dorman – Help – Exhaust Stud Kit – M10-1.25 x 40mm (Part No.03105)

Exhaust Stud Kit - M10-1.25 x 40mm

from

$10.49
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.

Product Features:
  • Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles.
  • Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
  • Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

HJS – Exhaust Hanger (Part No.H8050174953HJS)

Exhaust Hanger

from

$11.14
Exhaust Hanger

BRExhaust – Exhaust Flange Gasket (Part No.256-1121)

Exhaust Flange Gasket

from

$13.79
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Designed for a leak free connection
  • OE structure and design
  • Built to OEM specifications
  • Secure gas-tight connection
See More

Ishino – Exhaust Gasket (Part No.H4000156997ISH)

Exhaust Gasket

from

$8.30
Exhaust Gasket

Ishino – Exhaust Manifold Gasket (Part No.A8111117492ISH)

Exhaust Manifold Gasket

from

$22.13
Exhaust Manifold Gasket

Victor Reinz – Exhaust Manifold Gasket Set (Part No.71-53013-00)

Exhaust Manifold Gasket Set

from

$22.29
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-464)

Direct Fit Exhaust Manifold: With Heat Shield

from

$164.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.

Product Features:
  • Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
  • Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
  • Complete repair – includes all necessary gaskets and downpipe hardware
  • Trustworthy design – built by industry leader in aftermarket manifolds
See More

JBA Performance – 2035SJS 1 1/2" Header Shorty Stainless 05-11 Tacoma; 05-09 FJ; 03-09 4Runner Silver Ceramic (Part No.2035SJS)

2035SJS 1 1/2" Header Shorty Stainless 05-11 Tacoma; 05-09 FJ; 03-09 4Runner Silver Ceramic

from

$642.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:
  • JBA Performance Exhaust 2035SJS 1 1/2″ Header Shorty Stainless 05-11 Tacoma; 05-09 FJ; 03-09 4Runner Silver Ceramic
  • Mandrel bent stainless steel tube
See More

aFe POWER – MACH Force-Xp Cat Back Exhaust System: Black Tip, 409 Stainless Steel, Unleashes All Available HP (Part No.49-46022-B)

MACH Force-Xp Cat Back Exhaust System: Black Tip, 409 Stainless Steel, Unleashes All Available HP

from

$994.99
aFe introduces the MACH Force XP exhaust system for the BMW M5 F10 twin-turbo. In recent testing this system produced 18 horsepower and 30 lbs. x ft. of torque. This unique exhaust system is constructed from TIG-welded, 3 in. mandrel bent 304 stainless steel and uses quad, high-flow mufflers. This system was designed and engineered by tuning the perfect tube lengths, ultimately maximizing performance across the power band while maintaining a great tone. Also included is an X-pipe balance tube which equalizes and evenly distributes exhaust pulses for increased flow and minimizing exhaust drone. To finish off this system, aFe uses four 4 in. carbon fiber tips with 303 stainless steel machined finish inserts. This exhaust uses all factory hanger locations for a hassle-free installation. No modifications necessary. All aFe exhaust systems are manufactured in our Corona, California manufacturing facility.

Product Features:
  • 3 in. Mandrel Bent Stainless Steel
  • 100% Hand TIG Welded
  • Leak Free Seal
  • Aggressive Sound
See More

MagnaFlow – Off-Road Pro Series Cat-Back Performance Exhaust System (Part No.17115)

Off-Road Pro Series Cat-Back Performance Exhaust System

from

$442.99
The MagnaFlow 2005-2012 Toyota Tacoma Off-Road Pro Series Cat-Back Performance Exhaust System 17115 brings additional off-roading prowess and our deep signature exhaust note to your 4.0L 2005-2012 Toyota Tacoma with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17115 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Toyota Tacoma exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17115’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17115 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:
  • Available for gas or diesel trucks and SUV’s
  • 100% Stainless Steel
  • High flow straight through design
See More

Dorman – Exhaust Bolt and Spring Kit – (2) Springs (2) Studs (Sold by each) (Part No.675-221)

Exhaust Bolt and Spring Kit - (2) Springs (2) Studs (Sold by each)

from

$7.29
Exhaust manifold fastener kits provide a time-saving solution for repairing the manifold. Each kit is designed for direct replacement of rusted or damaged exhaust bolts and springs.

Product Features:
  • New hardware helps fix exhaust leaks
  • Depending on the application, kits include hardware to securely attach the manifold to the exhaust system
  • Also available separately (where applicable)
  • Hardened steel construction for long-lasting durability
See More

Dorman – Help – Manifold Bolt and Spring Kit – 3/8-16 x 1-3/4; M10-1.25 x 67mm (Part No.03123)

Manifold Bolt and Spring Kit - 3/8-16 x 1-3/4; M10-1.25 x 67mm

from

$14.99
Exhaust manifold fastener kits provide a time-saving solution for repairing the manifold. Each kit is designed for direct replacement of rusted or damaged exhaust bolts and springs.

Product Features:
  • Ideal replacement – the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type.
  • Complete installation – this kit includes hardware required for securely attaching the manifold to the exhaust system
  • Trustworthy construction – the kit’s bolt and spring are made of hardened steel for durable, long-lasting service life
  • Quality tested – kit components have undergone extensive testing to ensure proper function and long service life
See More

FELPRO – Exhaust Pipe Gasket (Part No.H4006826973FEL)

Exhaust Pipe Gasket

from

$23.52
Exhaust Pipe Gasket

Dorman – Exh. Manifold Bolt & (Part No.H10171184691DOR)

Exh. Manifold Bolt &

from

$13.62
Exh. Manifold Bolt &

Dorman – Exh. Manifold Bolt & (Part No.H1017831587DOR)

Exh. Manifold Bolt &

from

$10.74
Exh. Manifold Bolt &

Walker – Exhaust 35725 Exhaust System Hanger Insulator (Part No.35725)

Exhaust 35725 Exhaust System Hanger Insulator

from

$6.99
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they¿re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

BRExhaust – Exhaust Hanger (Part No.255-031)

Exhaust Hanger

from

$12.29
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Exhaust accessory that enables a complete installation process
  • Precise fitment
  • Precise fitment
  • Manufactured according to strict OE standards
  • Reduced Vibration
See More

BRExhaust – Exhaust Bolt, Nut, and Spring Kit (Part No.254-9910)

Exhaust Bolt, Nut, and Spring Kit

from

$23.49
BRExhaust offers exhaust flange bolts and kits to secure their premium line of exhaust replacement components. Each component delivers the strength of steel, a proper fit and an easier install or repair. BRExhaust has individual bolts, as well as bolts with springs and nuts to get your project completed. Choose the individual part or kit designed to fit on your vehicle application. The exact fit, easy installation and enduring functionality of BRExhaust’s OE replacement spring and bolt kits instantly equip your ride with optimally restored emissions control.
See More

Walker – Bracket Hanger Length 9.25 (Part No.36237)

Bracket Hanger Length 9.25

from

$27.99
Walker, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker is a ‘one-stop’ convenience, offerin

Product Features:
  • Offered in a variety of styles and sizes for your installation needs
  • New Walker accessories help to ensure effective exhaust repairs
  • Constructed from durable and robust material for long life
  • Designed to work seamlessly with OE and Walker aftermarket replacement parts
  • Walker supplies all of the accessories you need to do the complete exhaust job
See More

BRExhaust – Exhaust Clamp (Part No.250-058)

Exhaust Clamp

from

$6.49
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.

Product Features:
  • whilst developing the exhaust system
  • BRExhaust also develops the installation hardware to the same standards.
  • Manufactured from quality materials to ensure maximum durability
  • Proper fit and functionality to finish your install
  • Perfect, gas-tight performance
  • Exhaust accessory that facilitates a complete installation process.
  • Built to OEM specifications
See More

Walker – Exhaust Clamp (Part No.35335)

Exhaust Clamp

from

$1.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Pipe 2.25" Outlet (OD) (Part No.52471)

Exhaust Pipe 2.25" Outlet (OD)

from

$51.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
  • COMPATIBILITY — Ideal for weld or clamp installations
See More

BRExhaust – Direct-Fit Premium Front Pipe (Part No.713-389)

Direct-Fit Premium Front Pipe

from

$161.99
BRExhaust exhaust pipes are designed for easy bolt-on installations. Thicker gauge metal prevents the need for flow-resistant wrinkle bends, thereby enhancing overall exhaust performance. This pipe is engineered to meet OE specs to ensure performance, reliability and a precise factory-like fit. This part features a direct-fit design allowing for easy installation. If you are looking for a replacement exhaust pipe that will fit and perform exactly like the stock one while lasting even longer, BRExhaust is the brand you can rely on.

Product Features:
  • Manufactured according to strict OE standards
  • Sturdy design featuring premium-grade materials
  • Precise fitment
  • Hassle-free installation and functionality verified by comprehensive testing procedures
  • Easy installation
  • Direct-fit exhaust system component that saves installation time
See More

BRExhaust – Direct-Fit Premium Pipe (Part No.280-611)

Direct-Fit Premium Pipe

from

$71.99
BRExhaust exhaust pipes are manufactured to exacting standards and are based on the original OEM design for a guaranteed perfect fit. All BRExhaust pipes are made from aluminized steel. The exact fit, easy installation, durability and enduring functionality of BRExhaust’s OE replacement exhaust pipes instantly equip your ride with optimally restored emission control.

Product Features:
  • Manufactured according to strict OE standards
  • Sturdy design featuring premium-grade materials
  • Precise fitment
  • Hassle-free installation and functionality verified by comprehensive testing procedures
  • Easy installation
  • Direct-fit exhaust system component that saves installation time
See More

Upgrade your 2010 Toyota Tacoma with Top-Quality Exhaust Parts

When it comes to maintaining or upgrading your 2010 Toyota Tacoma, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Exhaust Parts are key to keeping your Tacoma functioning at its best. At Advance Auto Parts, we offer a wide selection of 97 Exhaust Parts for the 2010 Toyota Tacoma, designed to meet your needs without breaking the bank. From Exhaust Hanger replacements to Exhaust Fittings upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2010 Toyota Tacoma at great prices. Our Exhaust Parts inventory for this model ranges from just $2.49 to $1,781.99, with an average price of $428.80. Our 97 Exhaust Parts in stock come from 15 trusted brands, so you’re sure to find the right part for your 2010 Toyota Tacoma without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 Toyota Tacoma, we stock popular OEM and aftermarket Exhaust Parts from top names like FELPRO Walker, and more. FELPRO Exhaust Parts start at just $4.49 and boast an impressive 5 stars average rating from customers. With 602 customer reviews and counting, our 2010 Toyota Tacoma Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2010 Toyota Tacoma is always ready to roll. We’re committed to providing you with everything you need to keep your Tacoma in top shape, all in one place. Start shopping confidently below for your 2010 Toyota Tacoma!

Best-Selling Exhaust Hangers for 2010 Toyota Tacomas

Enhance the driving experience in your Toyota with 3 quality Exhaust Hanger components, starting at $6.99.

Walker – Exhaust 35725 Exhaust System Hanger Insulator (Part No.35725)

Exhaust 35725 Exhaust System Hanger Insulator

from

$6.99
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they¿re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Dynomax – 36427 Exhaust System Hanger (Part No.36427)

36427 Exhaust System Hanger

from

$23.79
Complete your exhaust repair with DynoMax exhaust system hangers. Designed with OE-style features (where applicable) to support undercar exhaust components, DynoMax exhaust system hangers are manufactured from durable and robust material for long service life.

Product Features:
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • OE DESIGN — Designed with OE-style features (where applicable) for easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS¿–¿Made from quality steel for durability and long life
  • PREMIUM MATERIALS┐–┐Made from quality steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax« accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
  • BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

HJS – Exhaust Hanger (Part No.H8050174953HJS)

Exhaust Hanger

from

$11.14
Exhaust Hanger

Most Popular 2010 Toyota Tacoma Exhaust Fittings

Customize your Toyota with 2 Exhaust Fittings products like Exhaust Clamps, all priced under $6.49.

BRExhaust – Exhaust Clamp (Part No.250-058)

Exhaust Clamp

from

$6.49
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.

Product Features:
  • whilst developing the exhaust system
  • BRExhaust also develops the installation hardware to the same standards.
  • Manufactured from quality materials to ensure maximum durability
  • Proper fit and functionality to finish your install
  • Perfect, gas-tight performance
  • Exhaust accessory that facilitates a complete installation process.
  • Built to OEM specifications
See More

Walker – Exhaust Clamp (Part No.35336)

Exhaust Clamp

from

$2.49
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Top Picks for 2010 Toyota Tacoma Exhaust Pipes

Upgrade Toyota Tacomas with top-quality Exhaust Pipes parts, including 20 OEM and aftermarket selections for your 2010 model.

Felpro – Exhaust Pipe Flange Gasket (Part No.61106)

Exhaust Pipe Flange Gasket

from

$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.61040)

Exhaust Pipe Flange Gasket

from

$7.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.61039)

Exhaust Pipe Flange Gasket

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

BRExhaust – Exhaust Flange Gasket (Part No.256-214)

Exhaust Flange Gasket

from

$5.29
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Designed for a leak free connection
  • OE structure and design
  • Built to OEM specifications
  • Secure gas-tight connection
See More

Walker – Exhaust Pipe 2.25" Outlet (OD) (Part No.54694)

Exhaust Pipe 2.25" Outlet (OD)

from

$52.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Walker – Exhaust Pipe Flange Gasket (Part No.31639)

Exhaust Pipe Flange Gasket

from

$9.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Pipe Flange Gasket (Part No.31585)

Exhaust Pipe Flange Gasket

from

$4.29
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – 2 Bolt Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials (Part No.31307)

2 Bolt Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials

from

$5.49
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials (Part No.31630)

Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials

from

$21.49
Complete your exhaust repair with Walker® gaskets and flanges. Available in a variety of styles and sizes, they are designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT – Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS – Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER – Use premium Walker® accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Pipe 2.25" Outlet (OD) (Part No.55651)

Exhaust Pipe 2.25" Outlet (OD)

from

$139.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
  • COMPATIBILITY — Ideal for weld or clamp installations
See More

Felpro – Exhaust Pipe Gasket (Part No.H4006924219FEL)

Exhaust Pipe Gasket

from

$8.18
Exhaust Pipe Gasket

Ishino Stone – Cat. Converter Gaske (Part No.H4001156957ISH)

Cat. Converter Gaske

from

$3.57
Cat. Converter Gaske

Walker – Exhaust Pipe 2.25" Outlet (OD) (Part No.53724)

Exhaust Pipe 2.25" Outlet (OD)

from

$75.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

BRExhaust – Exhaust Flange Gasket (Part No.256-1046)

Exhaust Flange Gasket

from

$18.49
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Designed for a leak free connection
  • OE structure and design
  • Built to OEM specifications
  • Secure gas-tight connection
See More

BRExhaust – Direct-Fit Premium Pipe (Part No.280-611)

Direct-Fit Premium Pipe

from

$71.99
BRExhaust exhaust pipes are manufactured to exacting standards and are based on the original OEM design for a guaranteed perfect fit. All BRExhaust pipes are made from aluminized steel. The exact fit, easy installation, durability and enduring functionality of BRExhaust’s OE replacement exhaust pipes instantly equip your ride with optimally restored emission control.

Product Features:
  • Manufactured according to strict OE standards
  • Sturdy design featuring premium-grade materials
  • Precise fitment
  • Hassle-free installation and functionality verified by comprehensive testing procedures
  • Easy installation
  • Direct-fit exhaust system component that saves installation time
See More

BRExhaust – Exhaust Flange Gasket (Part No.256-1108)

Exhaust Flange Gasket

from

$19.99
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Designed for a leak free connection
  • OE structure and design
  • Built to OEM specifications
  • Secure gas-tight connection
See More

Walker – Exhaust Pipe 2.25" Outlet (OD) (Part No.52471)

Exhaust Pipe 2.25" Outlet (OD)

from

$51.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
  • COMPATIBILITY — Ideal for weld or clamp installations
See More

BRExhaust – Exhaust Flange Gasket (Part No.256-1121)

Exhaust Flange Gasket

from

$13.79
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Designed for a leak free connection
  • OE structure and design
  • Built to OEM specifications
  • Secure gas-tight connection
See More

BRExhaust – Exhaust Flange Gasket (Part No.256-1156)

Exhaust Flange Gasket

from

$15.29
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Designed for a leak free connection
  • OE structure and design
  • Built to OEM specifications
  • Secure gas-tight connection
See More

Ishino – Exhaust Gasket (Part No.H4000156997ISH)

Exhaust Gasket

from

$8.30
Exhaust Gasket

In-Demand Exhaust Manifold and Headers for 2010 Toyota Tacomas

Select from 10 premium Exhaust Manifold and Headers parts for your 2010 Toyota Tacoma, with prices ranging from $7.29 to $1,381.99.

Dorman – Exhaust Bolt and Spring Kit – (2) Springs (2) Studs (Sold by each) (Part No.675-221)

Exhaust Bolt and Spring Kit - (2) Springs (2) Studs (Sold by each)

from

$7.29
Exhaust manifold fastener kits provide a time-saving solution for repairing the manifold. Each kit is designed for direct replacement of rusted or damaged exhaust bolts and springs.

Product Features:
  • New hardware helps fix exhaust leaks
  • Depending on the application, kits include hardware to securely attach the manifold to the exhaust system
  • Also available separately (where applicable)
  • Hardened steel construction for long-lasting durability
See More

Dorman – Help – Manifold Bolt and Spring Kit – 3/8-16 x 1-3/4; M10-1.25 x 67mm (Part No.03123)

Manifold Bolt and Spring Kit - 3/8-16 x 1-3/4; M10-1.25 x 67mm

from

$14.99
Exhaust manifold fastener kits provide a time-saving solution for repairing the manifold. Each kit is designed for direct replacement of rusted or damaged exhaust bolts and springs.

Product Features:
  • Ideal replacement – the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type.
  • Complete installation – this kit includes hardware required for securely attaching the manifold to the exhaust system
  • Trustworthy construction – the kit’s bolt and spring are made of hardened steel for durable, long-lasting service life
  • Quality tested – kit components have undergone extensive testing to ensure proper function and long service life
See More

Walker – EPA Ultra Manifold Converter, Direct Replacement, No Fabrication Needed (Part No.16390)

EPA Ultra Manifold Converter, Direct Replacement, No Fabrication Needed

from

$862.99
Designed to comply with EPA emissions requirements while delivering premium performance with assured compliance, Walker Ultra EPA-Compliant Manifold Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN — Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • STRONG AND DURABLE — Features thick OE-style flanges and manifolds for strength and durability
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
See More

Dorman – Manifold Converter – CARB Compliant (Part No.673-065)

Manifold Converter - CARB Compliant

from

$1381.99
This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:
  • Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
  • Convenient kit – includes gaskets and downpipe hardware to simplify installation
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

MagnaFlow – OEM Grade Direct Fit Catalytic Converter – EPA Federal Compliant (Part No.H3000957309MAG)

OEM Grade Direct Fit Catalytic Converter - EPA Federal Compliant

from

$1157.29
EPA Federal Compliant – Not Legal for sale or use in California. Legal in New York and Maine on EPA Federal Emission Equipped Vehicles only. OEM Grade is for use with California Emmision Equipped vehicles outside the State of California, New York and Maine. MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured. MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements. MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. All Federal catalytic converters meet EPA requirements. Federal Catalytic Converters are not legal for sale, installation or use on vehicles registered in the state of California.

Product Features:
  • Stainless steel construction
  • Direct-Fit; No welding or cutting
  • Ceramic and Metallic substrates
  • Federal Emissions compliant design
  • Formulated for Gas and Diesel Applications
See More

MagnaFlow – HM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.50849)

HM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$1139.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50849. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2011 Toyota Tacoma, 2005-2009 Toyota 4Runner, and more, this direct-fit catalytic converter also interchanges with OE parts 17140-31250 and 17140-31320, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – HM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.50848)

HM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$907.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50848. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2011 Toyota Tacoma, 2003-2009 Toyota 4Runner, and more, this direct-fit catalytic converter also interchanges with OE parts 17150-31011 and 17150-31250, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – CalCat CARB Direct Fit Catalytic Converter with Integrated Exhaust Manifold (Part No.83682)

CalCat CARB Direct Fit Catalytic Converter with Integrated Exhaust Manifold

from

$692.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker« CalCat« Manifold Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:
  • CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
  • DIRECT-FIT DESIGN –áBolt-off, bolt-onáOE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
  • SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCEá–áUtilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • STRONGáANDáDURABLEá–áFeatures thick OE-style flanges, hangersáandábrackets for strength and stainless-steel body with aluminized pipe and heat shields for durability
See More

JBA Performance – 2035SJS 1 1/2" Header Shorty Stainless 05-11 Tacoma; 05-09 FJ; 03-09 4Runner Silver Ceramic (Part No.2035SJS)

2035SJS 1 1/2" Header Shorty Stainless 05-11 Tacoma; 05-09 FJ; 03-09 4Runner Silver Ceramic

from

$642.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:
  • JBA Performance Exhaust 2035SJS 1 1/2″ Header Shorty Stainless 05-11 Tacoma; 05-09 FJ; 03-09 4Runner Silver Ceramic
  • Mandrel bent stainless steel tube
See More

JBA Performance – 2035S 1 1/2" Header Shorty Stainless Steel 05-11 Tacoma; 05-09 FJ; 03-09 4Runner 4.0L (Part No.2035S)

2035S 1 1/2" Header Shorty Stainless Steel 05-11 Tacoma; 05-09 FJ; 03-09 4Runner 4.0L

from

$451.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:
  • JBA Performance Exhaust 2035S 1 1/2″ Header Shorty Stainless Steel 05-11 Tacoma; 05-09 FJ; 03-09 4Runner 4.0L
  • Mandrel bent stainless steel tube
See More

Most Sold 2010 Toyota Tacoma Exhaust Mufflers

Explore our best-selling Toyota parts for the 2010 Tacoma among 3 OEM and aftermarket options starting from $23.52.

Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.56204)

Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed

from

$161.99
Combining the only broad-market stainless-steel body construction with a direct fit OE-style replacement, Walker Quiet-Flow SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.

Product Features:
  • CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler body with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

FELPRO – Exhaust Pipe Gasket (Part No.H4006826973FEL)

Exhaust Pipe Gasket

from

$23.52
Exhaust Pipe Gasket

Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.56206)

Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed

from

$158.99
Combining the only broad-market stainless-steel body construction with a direct fit OE-style replacement, Walker Quiet-Flow SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.

Product Features:
  • CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler body with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

Top-Rated Exhaust Parts Brands For Your 2010 Toyota Tacoma

Shop for the best-rated brands offering Exhaust Parts and other products for your 2010 Toyota Tacomas. Below you’ll find some of our best rated Exhaust Parts from FELPRO and Walker, and more. Exhaust Parts from these brands that fit a 2010 Tacoma start at just $2.49 and are rated as high as 5 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2010 Toyota Tacoma Exhaust Parts

When it comes to maintaining or upgrading your 2010 Toyota Tacoma, using quality Exhaust Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Exhaust Parts, specifically designed for the 2010 Toyota Tacoma. With over 7 FELPRO brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.49, with an average price of just $13.11. Plus, with over 20 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Exhaust Pipe Gasket
from
$8.18
This product is not rated

Exhaust Pipe Gasket

“”

Exhaust Manifold Gasket Set
from
$11.49
This product is not rated

Exhaust Manifold Gasket Set

“”

Exhaust Pipe Gasket
from
$23.52
This product is not rated

Exhaust Pipe Gasket

“”

Popular Walker 2010 Toyota Tacoma Exhaust Parts

Walker auto parts is one of the highest quality Exhaust Part brands in the market. Any 2010 Toyota Tacoma owner should feel confident when installing genuine Walker parts in their vehicle. To ensure the best fit and performance for your 2010 Tacoma, Advance Auto Parts carries a full inventory of 32 Walker Exhaust Parts. Plus you will be keeping your Toyota in peak condition while saving money because prices on these Walker Exhaust Parts range from $2.49 to $1,497.99, plus, with more than 152 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.

Exhaust Pipe 2.25" Outlet (OD)
from
$75.99
This product is not rated

Exhaust Pipe 2.25" Outlet (OD)

“”

Exhaust Pipe 2.25" Outlet (OD)
from
$139.99
This product is not rated

Exhaust Pipe 2.25" Outlet (OD)

“”

Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed
from
$158.99
This product is not rated

Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed

“”

FAQs for 2010 Toyota Tacoma Exhaust Parts

Which Exhaust Parts are best-sellers for 2010 Toyota Tacomas?

Out of 97 Exhaust Parts that fit 2010 Toyota Tacomas, the following parts are the top sellers:

What’s the price range for 2010 Toyota Tacoma Exhaust Parts?

Exhaust Part prices for the 2010 Toyota Tacoma start at $2.49 and go up to $1,781.99 for the most premium parts.

What’s the average price of a Exhaust Part for a 2010 Toyota Tacoma?

The average price for Exhaust Parts for the 2010 Toyota Tacoma is $428.80. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Exhaust Parts for other Toyota Tacoma model years?

Yes, we currently carry Exhaust Parts for 28 model years of Toyota Tacomas between 1995 and 2023. Exhaust Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Exhaust Parts for my 2010 Toyota Tacoma?

The cheapest 2010 Toyota Tacoma Exhaust Parts we carry in stock are:

What are the top-rated Exhaust Parts that fit the 2010 Toyota Tacoma?

Out of 602 reviews by customers, our 2010 Toyota Tacoma Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2010 Toyota Tacoma and their top-rated products:

What types of Exhaust Parts do you sell for my 2010 Toyota Tacoma?

Can I get help with 2010 Toyota Tacoma Exhaust Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Exhaust Parts and more.

What is your return policy for Toyota Tacoma Exhaust Parts?

Advance Auto Parts keeps returns simple. For new Toyota Tacoma Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.