Essential Exhaust Parts for 2021 Toyota Tacomas

from

$289.99

Built from heavy duty Aluminized Steel our Performance Series exhaust systems offer a value price without compromising on the quality built into every component. While the seams are a major point of rust through with some budget systems our fully sealed tubing adds years to your system. Constructed to the same specifications as our top of the line Pro Series we back this line with a 1 Year Warranty.

Product Features:

Built From Heavy Duty Aluminized Steel
Built To Perform: Designed To Maximize Exhaust Flow And Minimize Exhaust Temperatures
Fully Mandrel Bent Tubing To Minimal Bend Degree Angles
Easy Installation
Limited 1 Year Warranty

from

$824.99

The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

Features Patented Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
Increases The Overall Sound Level And Performance
Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade T-304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

from

$1066.99

Introducing an all new Rebel Series Dual Center Exit Cat-Back exhaust system for the Jeep Wrangler (JK) with V6-3.6L/3.8L engine. This unique Rebel Series exhaust system is designed with dual center exit tips for an aggressive look. The Tips are 4-1/2″ with aFe power plates and constructed out of stainless steel for durability. This performance cat-back exhaust is constructed of 2-1/2″ MIG-welded mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. In testing, this cat-back exhaust system added an astounding +9 horsepower and +14 lbs. x ft. of torque as verified by our in house dyno. This exhaust system comes complete with a 22″ free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.

Product Features:

Unique Dual Middle Exit Tips w/Laser Etched Logos
High Flow Stainless Steel Mufflers
Aggressive Sound
Hardware Included

from

$16.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function
Contains all gaskets and seals to remove and replace exhaust manifold
Contains all gaskets and seals to remove and replace exhaust manifold

from

$12.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function
Contains all gaskets and seals to remove and replace exhaust manifold
Contains all gaskets and seals to remove and replace exhaust manifold

from

$33.01

Exhaust Manifold Gasket

from

$23.52

Exhaust Pipe Gasket

from

$10.49

Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.

Product Features:

Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles.
Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$11.14

Exhaust Hanger

from

$23.79

Complete your exhaust repair with DynoMax exhaust system hangers. Designed with OE-style features (where applicable) to support undercar exhaust components, DynoMax exhaust system hangers are manufactured from durable and robust material for long service life.

Product Features:

KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
OE DESIGN — Designed with OE-style features (where applicable) for easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS¿–¿Made from quality steel for durability and long life
PREMIUM MATERIALS┐–┐Made from quality steel for durability and long life
BETTER TOGETHER — Use premium DynoMax« accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$14.99

Exhaust manifold fastener kits provide a time-saving solution for repairing the manifold. Each kit is designed for direct replacement of rusted or damaged exhaust bolts and springs.

Product Features:

Ideal replacement – the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type.
Complete installation – this kit includes hardware required for securely attaching the manifold to the exhaust system
Trustworthy construction – the kit’s bolt and spring are made of hardened steel for durable, long-lasting service life
Quality tested – kit components have undergone extensive testing to ensure proper function and long service life

from

$7.29

New hardware helps fix exhaust leaks
Depending on the application, kits include hardware to securely attach the manifold to the exhaust system
Also available separately (where applicable)
Hardened steel construction for long-lasting durability

from

$13.62

Exh. Manifold Bolt &

from

$10.74

Exh. Manifold Bolt &

from

$4.49

Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:

AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
HEAT RESISTANT — Designed to resist heat for long-lasting performance
PREMIUM MATERIALS — Made from high-quality materials for durability and long life
ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$11.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$8.99

AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
HEAT RESISTANT — Designed to resist heat for long-lasting performance
PREMIUM MATERIALS — Made from high-quality materials for durability and long life
ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$5.29

AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
HEAT RESISTANT — Designed to resist heat for long-lasting performance
PREMIUM MATERIALS — Made from high-quality materials for durability and long life
ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$1352.99

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:

CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability

from

$285.99

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:

CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation

from

$167.99

Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker Universal Catalytic Converters are available for pre-OBDII (1995 and older) vehicles.

Product Features:

EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
NO BREAK IN REQUIRED — Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter

from

$537.99

Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:

EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO or NY. Legal inME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter

from

$569.99

EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter

from

$8.18

Exhaust Pipe Gasket

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$15.29

BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:

Designed to facilitate hassle-free exhaust repair
Precise fitment
Manufactured from quality materials to ensure maximum durability
Designed for a leak free connection
OE structure and design
Built to OEM specifications
Secure gas-tight connection

from

$9.99

AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
HEAT RESISTANT — Designed to resist heat for long-lasting performance
PREMIUM MATERIALS — Made from high-quality materials for durability and long life
ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$3.57

Cat. Converter Gaske

Top Picks for 2021 Toyota Tacoma Catalytic Converters

Upgrade Toyota Tacomas with top-quality Catalytic Converters parts, including 3 OEM and aftermarket selections for your 2021 model.

show more show less

from

$722.99

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49703. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2005-2021 Toyota Tacoma and interchanges with OE parts 17410-0C100 and 17410-0C150, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
Simplifies installation with essential gaskets and hardware being included in the box.
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

from

$688.99

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24487. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2005-2021 Toyota Tacoma and interchanges with OE parts 17410-0C100 and 17410-0C200, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
Simplifies installation with essential gaskets and hardware being included in the box.
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

from

$30.85

Exhaust Gasket

2021 Toyota Tacoma Exhaust Parts

MBRP Exhaust – Performance Series, 3 In Cat Back System: No Tip, Aluminized Steel, Designed for Power and Sound (Part No.S5338P)

Borla Performance Exhaust – T-304 Ss, 2.25" Dia, Single Exhaust With Single Exit, 4"Dia X 14" L Round (Part No.140140)

aFe POWER – Rebel Series Cat Back Exhaust System: Polished Tip, 409 Stainless Steel, Gain up to 9 HP (Part No.49-46032-P)

Felpro – Exhaust Manifold Gasket Set (Part No.MS 92732)

Felpro – Exhaust Manifold Gasket Set (Part No.MS 96913)

Ishino – Exhaust Manifold Gasket (Part No.A8111161197ISH)

FELPRO – Exhaust Pipe Gasket (Part No.H4006826973FEL)

Dorman – Help – Exhaust Stud Kit – M10-1.25 x 40mm (Part No.03105)

HJS – Exhaust Hanger (Part No.H8050174953HJS)

Dynomax – 36427 Exhaust System Hanger (Part No.36427)

Dorman – Help – Manifold Bolt and Spring Kit – 3/8-16 x 1-3/4; M10-1.25 x 67mm (Part No.03123)

Dorman – Exhaust Bolt and Spring Kit – (2) Springs (2) Studs (Sold by each) (Part No.675-221)

Dorman – Exh. Manifold Bolt & (Part No.H10171184691DOR)

Dorman – Exh. Manifold Bolt & (Part No.H1017831587DOR)

Walker – Exhaust Pipe Flange Gasket (Part No.31332)

MAHLE Original – Exhaust Pipe Flange Gasket (Part No.F31662)

Walker – Exhaust Pipe Flange Gasket (Part No.31549)

Walker – Exhaust Pipe Flange Gasket (Part No.31374)

Walker – CalCat CARB Direct Fit Catalytic Converter 1.995" Outlet (OD) (Part No.83897)

Walker – CalCat CARB Universal Catalytic Converter 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.84407)

Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15042)

Walker – Catalytic Converter- EPA Ultra, Direct Replacement, No Fabrication Needed (Part No.52377)

Walker – Ultra EPA Direct Fit Catalytic Converter (Part No.52451)

Felpro – Exhaust Pipe Gasket (Part No.H4006924219FEL)

Felpro – Exhaust Pipe Flange Gasket (Part No.23561)

BRExhaust – Exhaust Flange Gasket (Part No.256-1156)

Walker – Exhaust Pipe Flange Gasket (Part No.31384)

Ishino Stone – Cat. Converter Gaske (Part No.H4001156957ISH)

HJS – Exhaust Hanger (Part No.H8050174953HJS)

Dorman – Exhaust Bolt and Spring Kit – (2) Springs (2) Studs (Sold by each) (Part No.675-221)

Dorman – Help – Manifold Bolt and Spring Kit – 3/8-16 x 1-3/4; M10-1.25 x 67mm (Part No.03123)

MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.49703)

MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.24487)

Ishino – Exhaust Gasket (Part No.H4000157024ISH)

FELPRO – Exhaust Pipe Gasket (Part No.H4006826973FEL)

Felpro – Exhaust Pipe Flange Gasket (Part No.61106)

Felpro – Exhaust Pipe Flange Gasket (Part No.61040)

Felpro – Exhaust Pipe Flange Gasket (Part No.61039)

Felpro – Exhaust Pipe Gasket (Part No.H4006924219FEL)