2010 Mercury Mariner Valve Cover and Cylinder Heads

Essential 2010 Mercury Mariner Valve Cover and Cylinder Heads

NTK – Engine Cylinder Head Temperature Sensor (Part No.EJ0011)

Engine Cylinder Head Temperature Sensor

from

$39.99
The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Probe length matched to OE. Thread sealer pre-applied if necessary
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Carquest Premium – Engine Cylinder Head Temperature Sensor (Part No.WTA1053)

Engine Cylinder Head Temperature Sensor

from

$42.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

NTK – Engine Cylinder Head Temperature Sensor (Part No.EJ0003)

Engine Cylinder Head Temperature Sensor

from

$45.99
The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Probe length matched to OE. Thread sealer pre-applied if necessary
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Carquest Premium – Engine Cylinder Head Temperature Sensor (Part No.WTA1292)

Engine Cylinder Head Temperature Sensor

from

$9.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26212 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$109.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
  • SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
  • MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
  • UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26233 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$107.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26250 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$66.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
  • UNIQUE COMBUSTION SEAL – Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Ishino – Stone Cylinder Head Gasket (Part No.A8100178846ISH)

Stone Cylinder Head Gasket

from

$58.45
ISHINO STONE® – Corteco Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Corteco Ishino solution is to supply gaskets featuring a combination of different metals with different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.

Product Features:
  • Superb quality and precision manufacturing process to ensure overall sealing dependability
  • Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
  • Manufactured to exact OEM specifications
See More

Spartan – Engine Cylinder Head; Ford 3.0 00-08 RGT Head (Part No.2FYXR)

Engine Cylinder Head; Ford 3.0 00-08 RGT Head

from

$638.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Spartan – Engine Cylinder Head; Ford 3.0 09-10 LFT Head (Part No.2FWRL)

Engine Cylinder Head; Ford 3.0 09-10 LFT Head

from

$657.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Spartan – Engine Cylinder Head; Ford 3.0 06-08 RGT Head (Part No.2FWVR)

Engine Cylinder Head; Ford 3.0 06-08 RGT Head

from

$644.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Spartan – Engine Cylinder Head; Ford 3.0 06-08 LFT Head (Part No.2FWVL)

Engine Cylinder Head; Ford 3.0 06-08 LFT Head

from

$654.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Victor Reinz – Engine Variable Valve Timing (VVT) Solenoid Gasket (Part No.15-10131-01)

Engine Variable Valve Timing (VVT) Solenoid Gasket

from

$21.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Sealed Power – Engine Valve Lifter (Part No.HT-2271)

Engine Valve Lifter

from

$10.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Unsurpassed quality that you can trust
  • Uses leading edge materials
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 26522 PT)

Cylinder Head Gasket Set

from

$142.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
  • STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 26233 PT-5)

Cylinder Head Gasket Set

from

$221.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
  • SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 26545 PT)

Cylinder Head Gasket Set

from

$196.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
  • STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 26250 PT-1)

Cylinder Head Gasket Set

from

$123.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
  • STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 26233 PT)

Cylinder Head Gasket Set

from

$217.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
  • STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72207)

Engine Cylinder Head Bolt Set

from

$72.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72159)

CYLINDER HEAD BOLT SET

from

$33.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

2010 Mercury Mariner Valve Cover and Cylinder Heads

Maybe you’re in the middle of a full rebuild of that 2010 Mercury Mariner. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 18 different Valve Cover and Cylinder Heads in our inventory ranging from $9.99 to $757.99. That means you can find the exact parts or products you need to keep that 2010 Mercury Mariner running smoothly.

Valve Cover and Cylinder Heads are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 2010 Mercury Mariner. Sealed Power, Carquest, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Valve Cover and Cylinder Heads for your 2010 Mercury Mariner, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 70 reviews in this category, some of the top rated parts include CYLINDER HEAD BOLT SET with 4.0 stars.

So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 2010 Mercury Mariner rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Valve Cover and Cylinder Heads Brands To Make Your 2010 Mercury Mariner Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2010 Mercury Mariner demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Mariner the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.

Popular Sealed Power Valve Cover and Cylinder Heads

We carry Sealed Power parts in our stock across Engine Valve Lifters categories, plus more. For a 2010 Mercury Mariner, our most popular Sealed Power Valve Cover and Cylinder Heads include:
Engine Valve Lifter
from $10.49
(32)
Engine Valve Lifter
Engine Valve Lifters

FAQs for 2010 Mercury Mariner Valve Cover and Cylinder Heads

What are the most purchased Valve Cover and Cylinder Heads for the 2010 Mercury Mariner?

Out of 18 Valve Cover and Cylinder Heads for the 2010 Mercury Mariner, the most popular in our inventory are:
Engine Cylinder Head Temperature Sensor
from $44.99
(4)
Engine Cylinder Head Temperature Sensor
Cylinder Head Temperature Sensors
Engine Cylinder Head Temperature Sensor
from $33.99
This product is not rated
Engine Cylinder Head Temperature Sensor
Cylinder Head Temperature Sensors
Engine Cylinder Head Bolt Set
from $72.99
This product is not rated
Engine Cylinder Head Bolt Set
Cylinder Head Bolt Sets

What are the top-rated 2010 Mercury Mariner Valve Cover and Cylinder Heads?

Top-rated Valve Cover and Cylinder Heads for your 2010 Mercury Mariner based on customer reviews/ratings are:
CYLINDER HEAD BOLT SET
from $33.49
(1)
CYLINDER HEAD BOLT SET
“replacement part”