2010 International 3200 Cooling and Climate Controls
More 2010 International 3200 Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 2010 International 3200, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 2010 International 3200 Cooling and Climate Controls
Carquest Premium – HVAC Blower Fan Switch (Part No.ACA1262)
from
$9.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)
from
$62.99
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160°F – 210°F thread-in probe
- For use with Imperial electric fans
- Thread-in probe for installation in water jacket or radiator
Imperial – Adjustable Thermostatic Fan Control (Part No.226203)
from
$22.99
Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans
Product Features:
See More
Product Features:
- Economy adjustable thermostatic fan control
- Economy Model; 32-248°F
- For use with Imperial electric fans
- Probe installs into radiator fins
Imperial – Adjustable Thermostatic Fan Control (Part No.226204)
from
$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160-210°F push-in probe
- For use with Imperial electric fans
- Probe installs into radiator fins
Dorman – HD Solutions – Blower Motor Speed Resistor (Part No.973-5089)
from
$71.99
Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
- Restores performance – fixes a fan that’s only operating on one speed or not working at all
- Thoroughly tested – examined and validated to perform safely and effectively
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Dorman – HD Solutions – Blower Motor Resistor Kit With Harness (Part No.973-5088)
from
$82.99
This HVAC blower motor resistor kit includes a resistor and harness pigtail to replace an overheated or corroded original equipment resistor on certain vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this blower motor resistor and harness kit directly replaces the original equipment on select vehicle years, makes and models
- Complete kit – each kit comes with a resistor and harness pigtail, which is essential for most repairs
- Restores functionality – made to perform like original equipment to restore full HVAC operation
- Trustworthy quality – backed by team of engineers and quality specialists in the USA
Imperial – Electric Fan – 14" Diameter (Part No.226114)
from
$99.99
Product Features:
See More
- Motors built and tested to quality specifications
- 14 in. universal fit reversible fan
- 1250 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Imperial – Electric Fan – 10" Diameter (Part No.226110)
from
$67.99
Electric fan with 10″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.
Product Features:
See More
Product Features:
- Rapid-Cool® Thin-Line electric fans
- 10″ Diameter
- 650 CFM
- Use as a pusher or puller fan
Carquest Premium – Integrated Thermostat Housing: With Seal, 192 Degrees (Part No.14899)
from
$30.49
Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Dorman – Thermostat Assembly: Includes Housing, 192 Degrees (Part No.902-1111)
from
$49.49
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
Gates – Heavy-Duty Engine Water Pump (Part No.42318HD)
from
$289.99
Product Features:
See More
- Our heavy-duty water pump o+ering is designed to handle severe and rigorous conditions
- 100 percent fully tested unitized bearings and seals
- Computerized machined surfaces for proper fit and sealing
- Gates heavy-duty water pumps are represented as a part number with an HD suffix
- Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
- New pumps manufactured to ISO/TS 16949 standards
Driveworks Water Pumps – Water Pump: New, Installation Gasket Included (Part No.59-8560)
from
$188.99
Driveworks Water Pumps offer a complete replacement part solution, with application coverage that spans from antique to present-day vehicles. All units are 100% tested and engineered to meet or exceed OEM performance, providing you a quality product you and your vehicle can rely on. All units are manufacturered with brand new components and are packaged with all gaskets required for replacement.
Product Features:
See More
Product Features:
- 100% Factory tested for leakage and dimensional precision
- Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
- Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
- Assembled with new, high-quality unitized shaft seals to prevent premature leakage
- Supplied with gasket and other seals/gaskets as applicable per application to help complete the job
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2027)
from
$112.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- 100% tested for reliable performance
- Durable housing features precisely machined mounting surface for proper sealing and fitment
- Equipped with weep chamber or similar feature to help prevent unnecessary replacement
- Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
- All gaskets or seals necessary for water pump are included
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
- This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
- This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
Carquest Premium – Standard Thermostat:: With Thermostat Insert and Seal, 192, 203 Degrees (Part No.49200)
from
$45.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Integrated Housing HD Thermostat: 190 Degrees (Part No.14889)
from
$92.99
Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Dorman – HD Solutions – Coolant Level Sensor (Part No.904-7550)
from
$51.99
This engine coolant level sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant level sensor is designed to match the fit and function of the original sensor on specified vehicles
- Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
- Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – HD Solutions – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.902-5102)
from
$19.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
- Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
- Seamless fit – reverse-engineered from the original equipment to fit perfectly
- Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
Carquest Premium – Engine Coolant Reservoir Cap (Part No.10239)
from
$8.29
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Engine Coolant Reservoir Cap (Part No.10240)
from
$5.99
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Dorman – HD Solutions – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.902-5102CD)
from
$30.49
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
- Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
- Seamless fit – reverse-engineered from the original equipment to fit perfectly
- Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
Carquest Premium – Reverse Rotation Blower Motor Wheel (Part No.35207)
from
$54.99
Product Features:
See More
- Durable Plastic Material
- Meets all requirements of international standard ISO 140
- Suitable for a wide variety of applications
- Set screw installation
Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35448)
from
$15.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Durable Plastic Material
- Meets all requirements of international standard ISO 140
- Suitable for a wide variety of applications
- Retainer clip installation
Popular 2010 International 3200 Cooling and Climate Controls Categories
2010 International 3200 Cooling and Climate Controls
You count on your 2010 International 3200 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 17 Cooling and Climate Controls ranging in price from $5.99 to $269.99, you’re sure to find everything you need for your 2010 International 3200.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 4 different brands like Imperial, Carquest Premium, and Gates. 2010 International 3200 Cooling and Climate Controls start as low as $5.99!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 315 extensive product reviews on 2010 International 3200 Cooling and Climate Controls.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2010 International 3200 below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 2010 International 3200
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2010 International 3200 running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Gates, and even more.
Popular Carquest Premium Cooling and Climate Controls
You’ll find popular Carquest Premium brand products across Engine Cooling Parts. All are waiting to get your 2010 International 3200 back on the road. Some of the top-rated Carquest Premium products in these categories are:
from
$30.49
(9)
Integrated Thermostat Housing: With Seal, 192 Degrees
Thermostat and Water Outlet Assemblies
Top-Rated Imperial Cooling and Climate Controls
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Cooling and Climate Controls for your 2010 International 3200, and some of our most reviewed Imperial parts include:
FAQs for 2010 International 3200 Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 2010 International 3200?
Out of 17 Cooling and Climate Controls for the 2010 International 3200, the most popular in our inventory are:
from
$45.99
This product is not rated
Standard Thermostat:: With Thermostat Insert and Seal, 192, 203 Degrees
Thermostats
