2010 Hyundai Tucson Transmission Parts
Find Your Specific 2010 Hyundai Tucson Transmission Parts
Below you will find various in-demand Hyundai Transmission Parts, components and accessories for your 2010 Tucson. Advance Auto Parts has popular Tucson parts like Automatic Transmission Parts, Transmission Mounts, Automatic Transmission Pan and Gaskets and more. You’ll also find aftermarket and OEM Transmission Parts for other Tucson model years including
2012,
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021 and more. Select a category of 2010 Hyundai Tucson Transmission Parts below and start saving instantly.
Popular 2010 Hyundai Tucson Transmission Parts Categories
Essential Transmission Parts for 2010 Hyundai Tucsons
Carquest Premium – Shift Interlock Solenoid (Part No.TCA1045)
from
$75.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Original Equipment – Neutral Safety Switc (Part No.J4050805820OEA)
from
$74.38
Neutral Safety Switc
Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)
from
$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)
from
$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.
Product Features:
See More
Product Features:
- Ideal for rigid cast aluminum parts
- Meets OEM Specifications
- Sensor safe & non-corrosive
- Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
- Blowout resistant, allowing leakproof gaskets to be made in just one minute
- Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
- Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
National – Oil Seal (Part No.711018)
from
$9.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More
Driveworks – Manual Transmission Input Shaft Seal (Part No.S-223014)
Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)
from
$54.99
Product Features:
See More
- Imperial Econo-Kool« tube and fin transmission cooler
- Size: 3/4″ x 5″ x 15-7/8″
- Compact and mid-size cars
- GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Carquest Premium – Neutral Safety Switch (Part No.CSA1486)
from
$65.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
National – Multi Purpose Seal (Part No.223014)
from
$11.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Anchor – Torque Strut Motor Mount: Front, 1 Piece (Part No.10025)
from
$111.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to HYUNDAI 16-21; KIA 17-21;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2016-2021
- Weight approx: 4 Lbs
Carquest Premium – Automatic Transmission Fluid Temperature Sensor (Part No.WTA1399)
from
$28.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Automatic Transmission Fluid Temperature Sensor (Part No.WTA1275)
from
$27.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Automatic Transmission Pressure Control Solenoid (Part No.TCC1015)
from
$105.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
National – Multi Purpose Seal (Part No.711014)
from
$5.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More
Anchor – Transmission Mount: Left, Piece (Part No.9380)
from
$120.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to HYUNDAI 05-09; KIA 05-10;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2005-2010
- Weight approx: 5 Lbs
Anchor – Transmission Mount: Left, 1 Piece (Part No.9779)
from
$151.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to HYUNDAI 10-13; KIA 11-13;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2010-2013
- Weight approx: 7 Lbs
SKF – Drive Axle Seal (Part No.J70431519824SKF)
from
$21.92
Drive Axle Seal
Carquest Premium – ABS Wheel Speed Sensor (Part No.ARE4108)
from
$118.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.
Product Features:
See More
Product Features:
- High grade materials that are equal to or better than OE provide durability and long service life
- All ABS sensors are tested for proper fit, form, and function
- Wire diameter and sheathing same or larger than OE to ensure product quality
- Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
- Includes all necessary brackets and hardware
MANDO – New ABS Wheel Speed Sensor Original Equipment (Part No.25A5085)
from
$62.99
One of the obvious signs of a bad ABS (Anti-Lock Brake System) Sensor is of course the ABS light (trouble code) and the noticeable distance it normally takes for your vehicle to come to a safe stop. HL Mando OE ABS Sensors are not only designed to help clear that trouble code, but more importantly give you a peace of mind knowing that your ABS system can once again function precisely as designed by factory. Trust Mando brand for brake system safety as we are the original – We Are OE!
Product Features:
See More
Product Features:
- Direct Original Equipment Replacement
- Tested for Quality, Durability, and Reliability
- Includes ABS Wheel Speed Sensor Wire Harness
- Manufactured in Korea
National – Multi Purpose Seal (Part No.710979)
from
$17.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -100°F to 450°F; -73°C to 232°C
- Resistant to hydrocarbon/oxygenate blends and provides superior performance
- Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
- Delivers quality and reliable performance for every type of repair
FAG US – SHAFT SEAL (Part No.SS2682)
from
$16.79
SHAFT SEAL
National – Automatic Transmission Output Shaft Seal (Part No.710978)
from
$12.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More
Driveworks – Oil Seal (Part No.S-320583)
from
$3.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Carquest Premium – Back Up Light Switch (Part No.SBA1373)
from
$26.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution
See More
FAE – Backup Light Switch (Part No.P3006566949FAE)
from
$27.36
The FAE aftermarket Backup Light Switch is the ideal high quality replacement for your vehicle. The backup Light Switch activates your reverse lights when your vehicle is in reverse. This aftermarket replacement backup light switch is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Upgrade your 2010 Hyundai Tucson with Top-Quality Transmission Parts
When it comes to maintaining or upgrading your 2010 Hyundai Tucson, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Hyundai or enhancing its overall performance, Transmission Parts are key to keeping your Tucson functioning at its best. At Advance Auto Parts, we offer a wide selection of 40 Transmission Parts for the 2010 Hyundai Tucson, designed to meet your needs without breaking the bank.
From
Automatic Transmission Part
replacements to
Transmission Mounts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2010 Hyundai Tucson at great prices.
Our Transmission Parts inventory for this model
ranges from just $3.79 to $165.99, with
an average price of $53.51.
Our 40 Transmission Parts in stock come from 10 trusted brands, so you’re sure to find the right part for your 2010 Hyundai Tucson without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 Hyundai Tucson, we stock popular OEM and aftermarket Transmission Parts from top names
like Permatex Imperial, and more.
Permatex Transmission Parts
start at just $6.99 and boast an impressive 5 stars average rating from customers.
With 442 customer reviews and counting, our 2010 Hyundai Tucson Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2010 Hyundai Tucson is always ready to roll. We’re committed to providing you with everything you need to keep your Tucson in top shape, all in one place.
Start shopping confidently below for your 2010 Hyundai Tucson!
Best-Selling Automatic Transmission Parts for 2010 Hyundai Tucsons
Enhance the driving experience in your Hyundai with 1 quality Automatic Transmission Part components, starting at $53.99.
Carquest Premium – Shift Interlock Solenoid (Part No.TCA1029)
from
$53.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Most Popular 2010 Hyundai Tucson Transmission Mounts
Customize your Hyundai with 2 Transmission Mounts products
like Transmission Mounts and
Torque Strut Mounts, all
priced under $165.99.
Anchor – Torque Strut Motor Mount: Front, 1 Piece (Part No.9760)
from
$165.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to HYUNDAI 10-15; KIA 11-16;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2010-2016
- Weight approx: 4 Lbs
Anchor – Transmission Mount: Left, 1 Piece (Part No.9779)
from
$151.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to HYUNDAI 10-13; KIA 11-13;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2010-2013
- Weight approx: 7 Lbs
Top Picks for 2010 Hyundai Tucson Automatic Transmission Pan and Gaskets
Upgrade Hyundai Tucsons with top-quality Automatic Transmission Pan and Gaskets parts, including 7 OEM and aftermarket selections for your 2010 model.
Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)
from
$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)
from
$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)
from
$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)
from
$16.99
Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 90 minutes
Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)
from
$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.
Product Features:
See More
Product Features:
- Ideal for rigid cast aluminum parts
- Meets OEM Specifications
- Sensor safe & non-corrosive
- Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
- Blowout resistant, allowing leakproof gaskets to be made in just one minute
- Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
- Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)
from
$32.99
OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.
Product Features:
See More
Product Features:
- Designed specially for high-torque and high vibration applications
- Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
- OEM specified
- Low-odor, non-corrosive formula
- Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)
Permatex – Ultra Grey® Rigid High-Torque RTV Silicone Gasket Maker (Part No.3K200329086PMX)
from
$12.39
3.5 oz. tube, carded – OEM specified. Permatex® Ultra silicones were developed to meet today’s technology changes. Sensor-safe, low odor, noncorrosive.
Product Features:
See More
Product Features:
- Outstanding oil resistance and joint movement tolerance
- Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones.
- Temperature range -65F to 500F (-54°C to 260°C) intermittent
- Resists auto and shop fluids and vibration Suggested Applications: Valve covers, oil pans, transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings. DIRECTIONS :
- For best results, clean and dry all surfaces with a residue-free solvent such as Permatex® Brake and Parts Cleaner.
- Cut nozzle to desired bead size. Gaskets are best formed using a 1/16 to 1/4 (2 to 6 mm) bead.
- Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes.
- Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
- Allow to dry for one hour then re-tighten 1/4 to 1/2 turn.
- Silicone will skin over in one hour and fully cure in 24 hours under normal conditions.
- Allow more time for cold or very dry conditions.
- Clean uncured silicone from hands, tools and clothing with Permatex® Fast Orange® Wipes or Fast Orange® Hand Cleaner. NOTE: Not recommended for use on head gaskets or on parts in contact with gasoline. TECHNICAL DATA SHEET
In-Demand Transmission Seals for 2010 Hyundai Tucsons
Select from 9 premium Transmission Seals parts for your 2010 Hyundai Tucson, with prices ranging from $5.49 to $21.92.
National – Automatic Transmission Output Shaft Seal (Part No.710978)
from
$12.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More
National – Multi Purpose Seal (Part No.223014)
from
$11.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.710979)
from
$17.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -100°F to 450°F; -73°C to 232°C
- Resistant to hydrocarbon/oxygenate blends and provides superior performance
- Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
- Delivers quality and reliable performance for every type of repair
SKF – Drive Axle Seal (Part No.J70431519824SKF)
from
$21.92
Drive Axle Seal
National – Multi Purpose Seal Ring (Part No.711015)
from
$9.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More
Driveworks – Manual Transmission Input Shaft Seal (Part No.S-223014)
National – Oil Seal (Part No.711018)
from
$9.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More
FAG US – SHAFT SEAL (Part No.SS2682)
from
$16.79
SHAFT SEAL
National – Multi Purpose Seal (Part No.711014)
from
$5.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More
Most Sold 2010 Hyundai Tucson Transmission Cooler and Parts
Explore our best-selling Hyundai parts for the 2010 Tucson among 9 OEM and aftermarket options starting from $39.99.
Imperial – High Performance Transmission Oil Cooler (Part No.240516)
from
$85.99
Product Features:
See More
- Imperial high-performance transmission cooler
- Size: 3/4″ x 10″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)
from
$73.99
The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.
Product Features:
See More
Product Features:
- Imperial Maxi-Cool® plate and fin transmission cooler
- Size: 3/4″ x 11″ x 7-1/2″
- Mid-size and full-size cars, pickups
- GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Imperial – Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (Part No.243006)
from
$59.99
Product Features:
See More
- Imperial Rapid-Cool« plate and fin transmission cooler
- Size: 3/4″ x 11″ x 6″
- Sub-compact to compact cars
- GVWR up to 18,000 lbs.
- Compatible with OEM cooler systems
Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)
from
$54.99
Product Features:
See More
- Imperial Econo-Kool« tube and fin transmission cooler
- Size: 3/4″ x 5″ x 15-7/8″
- Compact and mid-size cars
- GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)
from
$39.99
Product Features:
See More
- Imperial Econo-Kool« tube and fin transmission cooler
- Size: 3/4″ x 5″ x 12-1/2″
- Sub-compact to compact cars
- GVWR up to 12,000 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)
from
$80.99
Product Features:
See More
- Imperial Rapid-Cool« plate and fin transmission cooler
- Size: 3/4″ x 11″ x 9-1/2″
- Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
- GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
- 33% more efficient than a comparable tube and fin design
Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)
from
$52.99
Product Features:
See More
- Mid-size and full-size cars, pickups
- GVWR up to 18,000 lbs.; towing up to 3,500 lbs
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – High Performance Transmission Oil Cooler (Part No.240514)
from
$81.99
High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
Imperial – High Performance Transmission Oil Cooler (Part No.240512)
from
$67.99
Product Features:
See More
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 12-1/2″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Top-Rated Transmission Parts Brands For Your 2010 Hyundai Tucson
Shop for the best-rated brands offering Transmission Parts and other products for your 2010 Hyundai Tucsons. Below you’ll find some of our best rated Transmission Parts from Permatex and Imperial, and more. Transmission Parts from these brands that fit a 2010 Tucson start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Permatex 2010 Hyundai Tucson Transmission Parts
When it comes to maintaining or upgrading your 2010 Hyundai Tucson, using quality Transmission Parts is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Transmission Parts, specifically designed for the 2010 Hyundai Tucson. With over 7 Permatex brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $18.48. Plus, with over 106 customer reviews and an average rating of 5 stars, you can trust that our Permatex Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Imperial 2010 Hyundai Tucson Transmission Parts
Imperial auto parts is one of the highest quality Transmission Part brands in the market. Any 2010 Hyundai Tucson owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 2010 Tucson, Advance Auto Parts carries a full inventory of 9 Imperial Transmission Parts. Plus you will be keeping your Hyundai in peak condition while saving money because prices on these Imperial Transmission Parts range from $39.99 to $85.99, plus, with more than 114 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.
from
$73.99
$73.99
(7)
Maxi-Kool® XL Transmission Oil Cooler
“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”
FAQs for 2010 Hyundai Tucson Transmission Parts
Which Transmission Parts are best-sellers for 2010 Hyundai Tucsons?
Out of 40 Transmission Parts that fit 2010 Hyundai Tucsons, the following parts are the top sellers:
- High Performance Transmission Oil Cooler (15230020) – $85.99
- Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (20230013) – $80.99
- The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (12079746) – $16.99
What’s the price range for 2010 Hyundai Tucson Transmission Parts?
Transmission Part prices for the 2010 Hyundai Tucson start at $3.79 and go up to $165.99 for the most premium parts.
What’s the average price of a Transmission Part for a 2010 Hyundai Tucson?
The average price for Transmission Parts for the 2010 Hyundai Tucson is $53.51. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Transmission Parts for other Hyundai Tucson model years?
What are the cheapest Transmission Parts for my 2010 Hyundai Tucson?
The cheapest 2010 Hyundai Tucson Transmission Parts we carry in stock are:
- Oil Seal (3267830) – $3.79
- Multi Purpose Seal (12067757) – $5.49
- Manual Transmission Input Shaft Seal (11494085) – $5.79
- Sensor-Safe, High Torque RTV Silicone Gasket Maker (99997948) – $6.99
- Multi Purpose Seal Ring (11976123) – $9.29
What are the top-rated Transmission Parts that fit the 2010 Hyundai Tucson?
Out of 442 reviews by customers, our 2010 Hyundai Tucson Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2010 Hyundai Tucson and their top-rated products:
- Transmission Cooler and Parts
- Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (20230023) – $59.99
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99
- High Performance Transmission Oil Cooler (15230020) – $85.99
- Automatic Transmission Pan and Gaskets
- Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (20230023) – $59.99
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99
- High Performance Transmission Oil Cooler (15230020) – $85.99
What types of Transmission Parts do you sell for my 2010 Hyundai Tucson?
As of 2/5/25, these are some of the most in-demand types of Transmission Parts for a 2010 Hyundai Tucson:
Can I get help with 2010 Hyundai Tucson Transmission Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Hyundai Transmission Parts and more.
What is your return policy for Hyundai Tucson Transmission Parts?
Advance Auto Parts keeps returns simple. For new Hyundai Tucson Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
