2010 GMC Sierra 3500 HD Engine Cooling Parts

Essential 2010 GMC Sierra 3500 HD Engine Cooling Parts

ACDelco – GM Original Equipment Engine Coolant Thermostat (Part No.G4000310418ACD)

GM Original Equipment Engine Coolant Thermostat

from

$81.39
An ACDelco GM Original Equipment Engine Coolant Thermostat is a temperature controlled valve located in the engine coolant outlet to, or the inlet from, the radiator, and is a GM-recommended replacement for your vehicle’s original component. It controls the flow of coolant through the radiator to enable the engine to reach and maintain its normal operating temperature. This original equipment engine coolant thermostat has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Control the flow of coolant through the radiator to enable the engine to reach and maintain its normal operating temperature
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Delphi – Engine Coolant Temperature Sensor (Part No.TS10075)

Engine Coolant Temperature Sensor

from

$29.99
Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:
  • Delphi temperature sensors deliver accurate readings and optimal performance
  • Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
  • Each sensor is electrically insulated to eliminate interference from other components in the vehicle
  • Delphi temperature sensors are impervious to electrical noise and interference
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Felpro – Engine Coolant Outlet Gasket (Part No.35757)

Engine Coolant Outlet Gasket

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

KAI – Radiator Support Tie Bar (Part No.GM1225263)

Radiator Support Tie Bar

from

$70.99
New Standard Replacement Radiator Support Upper Tie Bar

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

ACDelco – GM Original Equipment Engine Cooling Fan Clutch (Part No.G5010358957ACD)

GM Original Equipment Engine Cooling Fan Clutch

from

$636.94
ACDelco GM Original Equipment Engine Cooling Fan Clutches control the speed of the radiator fan based on the temperature of the air after it passes through the radiator fins. This original equipment engine cooling fan clutch is a GM-recommended replacement for your vehicle’s original components and has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Quiets noisy cooling fans with stuck fan clutches, restores fuel economy
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Felpro – Engine Water Pump Gasket (Part No.35756)

Engine Water Pump Gasket

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

ACDelco – Relay (Part No.P2020846897ACD)

Relay

from

$110.00
Relay

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Dorman – Engine Cooling Fan Pulley Bracket (Part No.300-826)

Engine Cooling Fan Pulley Bracket

from

$271.99
This engine cooling fan pulley bracket is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine cooling fan pulley bracket matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bracket is a reliable replacement for an original part that has failed due to fatigue.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Clutch Fan Blade: Plastic, Cost Effective And Reliable (Part No.621-106)

Clutch Fan Blade: Plastic, Cost Effective And Reliable

from

$116.99
Replace your damaged cooling fan blade with this direct replacement. This vehicle-specific application is engineered for a perfect fit and is made from quality materials to ensure durability and restore proper cooling system operation.

Product Features:
  • Direct replacement – this engine cooling fan blade fits and functions like the original equipment fan blade.
  • Quality construction – manufactured from premium materials for a long service life.
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Adjustable Thermostatic Fan Control

from

$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160-210°F push-in probe
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

KAI – Coolant Reservoir (Part No.GM3014118)

Coolant Reservoir

from

$46.99
New Platinum Pro Coolant Recovery Tank, With Cap

Product Features:
  • With Cap, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Felpro – Engine Water Pump Installation Kit (Part No.ES 71347)

Engine Water Pump Installation Kit

from

$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Dorman – Coolant Housing/Water Outlet: With Water Outlet, 90 Degree Neck Angle (Part No.902-2127)

Coolant Housing/Water Outlet: With Water Outlet, 90 Degree Neck Angle

from

$111.99
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

GM Genuine Parts – Water Inlet Seal (Part No.12587397)

Water Inlet Seal

from

$8.99
GM Genuine Parts Engine Coolant Thermostat Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help close and prevent coolant from leaking out of your vehicle’s cooling system components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps close and prevent coolant from leaking out of your vehicle’s cooling system components to maintain the proper engine temperature
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – Water Pipe Gasket (Part No.G2048429977ACD)

Water Pipe Gasket

from

$13.55
Water Pipe Gasket

KAI – Radiator Support (Part No.GM1225265)

Radiator Support

from

$59.99
New Standard Replacement Radiator Support Center

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

ACDelco – GM Original Equipment Expansion Tank Cap (Part No.G1040468277ACD)

GM Original Equipment Expansion Tank Cap

from

$14.96
An ACDelco GM Original Equipment Expansion Tank Cap is a spring loaded cap that seals the radiator filler neck or surge tank, and is a GM-recommended replacement for your vehicle’s original component. It maintains pressure on the cooling system while the engine is operating, which raises the boiling point of the engine coolant. It also replenishes the system with coolant from the expansion tank (if equipped) when the engine cools off. This original equipment radiator cap has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Get the GM quality you know and trust with ACDelco GM Original Equipment Thermostats and Caps. Stay with the brand of parts your General Motors vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Thermostats and Caps are engineered for virtually every model of GM car, light duty truck, and sport utility vehicle.

Product Features:
  • Seal and maintain pressure on the cooling system for vehicle safety
  • Raise the boiling point of the engine coolant to maintain efficiency
  • Fit most models of GM vehicles for expanded coverage
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – GM Original Equipment Oil Cooler Seal (Part No.A6310320812ACD)

GM Original Equipment Oil Cooler Seal

from

$45.26
The ACDelco GM Original Equipment Engine Oil Cooler Seal is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Mahle – Intake Manifold Gasket Set (Part No.A8043948945MAH)

Intake Manifold Gasket Set

from

$169.43
WARNING: This item cannot be returned for a replacement or refund if opened! Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.

Product Features:
  • Original equipment design and quality
  • Head sets give you original equipment form, fit, and function
  • Utilizes OE equivalent or better materials in all head sets
  • Packaged in shrink wrapped tray
  • Every part you need to complete your gasket repair in one package unless otherwise stated
See More

ACDelco – 12587397 GM Original Equipment Engine Coolant Water Inlet Seal (Part No.G4030310258ACD)

12587397 GM Original Equipment Engine Coolant Water Inlet Seal

from

$10.84
An ACDelco GM Original Equipment Engine Coolant Water Inlet Seal is a GM-recommended replacement for your vehicle’s original component. It seals and helps prevent coolant from leaking out of cooling system components. This original equipment engine coolant water inlet seal has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Seals and helps prevent coolant from leaking out of cooling system components to maintain the proper engine temperature
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Engine Cooling Fan Motor Connector (Part No.PTC1356)

Engine Cooling Fan Motor Connector

from

$33.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Electric Fan - 14" Diameter

from

$99.99
Product Features:
  • Motors built and tested to quality specifications
  • 14 in. universal fit reversible fan
  • 1250 CFM
  • UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
See More

Victor Reinz – Engine Water Pump Installation Kit (Part No.18-10020-01)

Engine Water Pump Installation Kit

from

$9.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

CSF Cooling – Core Dimensions 22.75"W X 34" L X 7/8"D, Crossflow, Aluminum (Part No.3798)

Core Dimensions 22.75"W X 34" L X 7/8"D, Crossflow, Aluminum

from

$188.99
CSF Radiators are designed and built to High Performance Standards. Radiators are carefully engineered and Wind Tunnel Tested in laboratory for Cooling Performance Validation. We have over 10,000 different models of Radiators that we manufacture and supply for all the leading brands of vehicles on the road.

Product Features:
  • OEM Specified Plastic Tank-Aluminum Core Construction
  • Tanks Are Made From Virgin Grade Engineered Plastic Resins, Which Are Glass Filled For Added Strength And Durability
  • Gaskets Are Made From Special Grade EPDM Rubber To Withstand Extreme Temperatures Of Up To -120 Degrees Fahrenheit
  • Tubes – Welded Type Or Latest Generation B-Tube Design
  • Fins High Performance Multi-Louvered Design OEM Spec
  • 100 Percent Leak Tested Before Leaving Factory At 150 Percent Of Operating Pressure
  • High Performance Transmission Cooler With Special Built-In Turburlator, When Applicable
  • Drop In Fit
  • All Components Are Installed, Torqued, And Tested On Radiator During Assembly
See More

Dorman – Ford Trim Panel Retainers (Part No.963-022)

Ford Trim Panel Retainers

from

$3.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

2010 GMC Sierra 3500 HD Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 2010 GMC Sierra 3500 HD. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 106 different Engine Cooling Parts in our inventory ranging from $2.29 to $655.05. That means you can find the exact parts or products you need to keep that 2010 GMC Sierra 3500 HD running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 20 different brands to make sure you have plenty of trusted parts to choose from for your 2010 GMC Sierra 3500 HD. Permatex, Carquest Premium, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 2010 GMC Sierra 3500 HD, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 6,741 reviews in this category, some of the top rated parts include Engine Water Pump: New, Gasket/Seals Included with 4.4 stars and Adjustable Thermostatic Fan Control with 4.8 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2010 GMC Sierra 3500 HD rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 2010 GMC Sierra 3500 HD Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2010 GMC Sierra 3500 HD demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Sierra 3500 HD the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

FAQs for 2010 GMC Sierra 3500 HD Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2010 GMC Sierra 3500 HD?

Out of 106 Engine Cooling Parts for the 2010 GMC Sierra 3500 HD, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Water Pump Housing Gaskets
Engine Water Pump Gasket
from $6.49
(100)
Engine Water Pump Gasket
Water Pump Gaskets
Standard Thermostat: With Seal, 187 Degrees
from $38.99
(45)
Standard Thermostat: With Seal, 187 Degrees
Thermostats

What are the top-rated 2010 GMC Sierra 3500 HD Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 2010 GMC Sierra 3500 HD based on customer reviews/ratings are:
Engine Water Pump: New, Gasket/Seals Included
from $216.99
(41)
Engine Water Pump: New, Gasket/Seals Included
“I hope it lasts”
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
“Advance kicks butt”
Adjustable Thermostatic Fan Control
from $55.99
(33)
Adjustable Thermostatic Fan Control
“I used this fan control on my 2006 pt cruiser. It’s simple to install and works great. I’m going to get another one for my 1999 jeep Cherokee.”