2010 Ford F-550 Super Duty Transmission Parts

Below you will find various in-demand Ford Transmission Parts, components and accessories for your 2010 F-550 Super Duty. Advance Auto Parts has popular F-550 Super Duty parts like Automatic Transmission Pan and Gaskets, Automatic Transmission Parts, Transmission Seals and more. You’ll also find aftermarket and OEM Transmission Parts for other F-550 Super Duty model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2010 Ford F-550 Super Duty Transmission Parts below and start saving instantly.

Popular 2010 Ford F-550 Super Duty Transmission Parts Categories

Automatic Transmission Shift Linkages

Automatic Transmission Oil Temperature Sensors

OE Transmission Coolers

Master and Slave Cylinder Assemblies

Transmission Solenoids

Transmission Oil Cooler Lines

Countershaft Bearings

Shift Interlock Solenoids

Automatic Transmission Line Connectors

Transmission Mounts

Transmission Rebuild Kits

Transmission Oil Pan Gaskets

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Transmission Bushings

Automatic Transmission Gear Position Sensors

Transmission Temperature Sensors

Automatic Transmission Oil Pump Seals

Transmission Drain Plugs

Transmission Seals and O-rings

Manual Transmission Bearing and Seal Overhaul Kits

Extension Housing Seals

Manual Transmission Output Shaft Seals

Automatic Transmission Case Vents

Manual Transmission Main Shafts

Automatic Transmission Drain Plug Gaskets

Manual Transmission Blocking Rings

Shift Forks

Shift Shaft Seals

Manual Transmission Extension Housing Seals

Remanufactured Automatic Transmissions

Manual Transmission Gears

Manual Transmission Synchro Sleeves

Essential Transmission Parts for 2010 Ford F-550 Super Duties

from

$22.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$31.99

When the oil cooler line connector fails on certain vehicles, the original manufacturer makes you buy an entire new assembly just to replace the failed piece. This Dorman OE FIX quick connector directly replaces the original for a simple repair.

Product Features:

Transmission Cooler Line Quick Connector.
Transmission Cooler Line Quick Connector.
When the oil cooler line connector fails on certain vehicles, the original manufacturer makes you buy an entire new assembly just to replace the failed piece. This Dorman OE FIX quick connector directly replaces the original for a simple repair.
Cost-effective solution – this transmission cooler line quick connector directly replaces the original connector on certain vehicles
Application specific – reverse-engineered to fit and function exactly like the original on select vehicles

from

$56.99

ABS Wheel Speed Sensor

from

$19.29

This transmission drain plug is designed to match the dimensions and function of the original plug on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this transmission drain plug matches the dimensions and function of the factory hardware on specified vehicle years, makes and models.
Ideal solution – this drain plug is a reliable replacement for an original part that is damaged or lost during service
Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
Quality assured – backed by a team of product experts in the United States and more than a century of automotive experience

from

$29.49

This automatic transmission case vent valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this automatic transmission case vent valve is designed to match the fit and function of the original valve on specified vehicles.
Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 99-07; LINCOLN 03-06;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1999-2007
Weight approx: 5 Lbs

from

$81.99

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.

from

$23.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$303.99

For modern, foot-operated clutches we offer hydraulic release systems that not only replace cable-actuated systems, they also fit into increasingly narrow engine compartments. Because there is no more friction from the cable, clutch wear is lowered dramatically while driving comfort improves.

from

$185.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$19.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$36.99

This automatic transmission speed sensor matches the fit and function of the original equipment sensor to restore critical speed-dependent vehicle functions. This part has been engineered and rigorously tested to ensure reliable performance.

Product Features:

Direct replacement – this automatic transmission speed sensor matches the fit and function of the original equipment sensor.
Durable construction – this sensor is engineered to precise standards to ensure accurate signal output.
Easy installation – this sensor is installed using the original hardware and plugs into the vehicle’s existing wiring
Quality tested – this part has undergone try-on validation and rigorous quality testing to ensure a quality fit and long service life

from

$9.61

Trans Case Shift Sft

from

$16.99

When the transmission linkage clips break on many Ford, Lincoln and Mercury vehicles, you usually have to replace the entire shifter cable assembly. This Dorman OE FIX clip allows direct replacement of only the failed original clip, saving money.

Product Features:

Smart fix – this direct replacement shift linkage clip saves time and money by directly replacing the failure-prone clip on many Ford, Lincoln and Mercury vehicles.
Effective alternative – allows you to restore shifter mechanism operation without replacing the entire shifter cable assembly
Application specific – made for certain Ford, Lincoln and Mercury vehicles
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$18.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$20.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Automatic Transmission Fluid Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper monitoring of the transmission’s oil temperature.
The Automatic Transmission Fluid Temperature Sensor monitors the temperature of the transmission fluid. The transmission control module (TCM) uses input from this sensor to control transmission operations.

from

$47.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$10.29

CUP

from

$85.99

This shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles.
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current.
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$81.09

Shift Interlock Sole

from

$38.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$54.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$47.99

GENERAL SEAL

from

$25.94

AT Seal

from

$20.79

CUP

Upgrade your 2010 Ford F-550 Super Duty with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2010 Ford F-550 Super Duty, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Transmission Parts are key to keeping your F-550 Super Duty functioning at its best. At Advance Auto Parts, we offer a wide selection of 85 Transmission Parts for the 2010 Ford F-550 Super Duty, designed to meet your needs without breaking the bank. From Automatic Transmission Pan and Gasket replacements to Automatic Transmission Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2010 Ford F-550 Super Duty at great prices. Our Transmission Parts inventory for this model ranges from just $3.99 to $3,402.99, with an average price of $364.46. Our 85 Transmission Parts in stock come from 21 trusted brands, so you’re sure to find the right part for your 2010 Ford F-550 Super Duty without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 Ford F-550 Super Duty, we stock popular OEM and aftermarket Transmission Parts from top names like Imperial Dorman, and more. Imperial Transmission Parts start at just $23.29 and boast an impressive 4 stars average rating from customers. With 375 customer reviews and counting, our 2010 Ford F-550 Super Duty Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2010 Ford F-550 Super Duty is always ready to roll. We’re committed to providing you with everything you need to keep your F-550 Super Duty in top shape, all in one place. Start shopping confidently below for your 2010 Ford F-550 Super Duty!

Best-Selling Automatic Transmission Pan and Gaskets for 2010 Ford F-550 Super Duties

Enhance the driving experience in your Ford with 4 quality Automatic Transmission Pan and Gasket components, starting at $5.19.

show more show less

from

$22.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$30.96

AT Pan Gasket

from

$24.17

AT Pan Gasket

from

$5.19

Oil Drain Plug Gaske

Most Popular 2010 Ford F-550 Super Duty Automatic Transmission Parts

Customize your Ford with 20 Automatic Transmission Parts products like Transmission Solenoids, Transmission Bushings, and Shift Interlock Solenoids, all priced under $3,402.99.

show more show less

from

$12.29

This clutch pedal bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pedal bushing matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$16.99

Smart fix – this direct replacement shift linkage clip saves time and money by directly replacing the failure-prone clip on many Ford, Lincoln and Mercury vehicles.
Effective alternative – allows you to restore shifter mechanism operation without replacing the entire shifter cable assembly
Application specific – made for certain Ford, Lincoln and Mercury vehicles
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$85.99

Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles.
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current.
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$150.37

AT Solenoid

from

$3402.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$3402.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$3135.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$2924.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2924.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2924.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2569.99

(PDT)Premium Drivetrain Transmissions are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each transmission assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$2569.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2569.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2569.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2569.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2569.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2569.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2569.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$185.99

from

$29.49

Direct replacement – this automatic transmission case vent valve is designed to match the fit and function of the original valve on specified vehicles.
Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Top Picks for 2010 Ford F-550 Super Duty Transmission Seals

Upgrade Ford F-550 Super Duties with top-quality Transmission Seals parts, including 13 OEM and aftermarket selections for your 2010 model.

show more show less

from

$9.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$23.79

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$18.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$314.99

ManTransBrg-SealKit

from

$39.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$29.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$25.94

AT Seal

from

$19.24

Extension Hsng. Seal

from

$14.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$12.79

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$7.82

AT Pump Seal

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$3.99

Shift Shaft O-Ring

In-Demand Transmission Mounts for 2010 Ford F-550 Super Duties

Select from 1 premium Transmission Mounts parts for your 2010 Ford F-550 Super Duty.

show more show less

from

$75.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 08-17;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2008-2017
Weight approx: 4 Lbs
MOUNT HOLES ON CENTER: 5.57 INCH/141.5 MM
STUDS ON CENTER: 2.32 INCH/59 MM
HEIGHT: 2.75 INCH/70.00 MM
STUD THREAD: M12X1.5 31MM

Most Sold 2010 Ford F-550 Super Duty Transmission Cooler and Parts

Explore our best-selling Ford parts for the 2010 F-550 Super Duty among 12 OEM and aftermarket options starting from $54.99.

show more show less

from

$85.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool® plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

from

$359.99

This automatic transmission oil cooler is designed to match the function of an original cooler on specified vehicles. It is engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion, or damage.

Product Features:

Direct replacement – this automatic transmission fluid cooler is designed to match the function of an original cooler on specified vehicle.
Ideal solution – engineered to help maintain proper transmission fluid temperature when an original cooler has failed from heat, corrosion or damage.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$81.99

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.

from

$65.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design

from

$81.99

High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion

from

$67.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$54.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$65.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$145.99

Oil cooler 1-1/2″ x 12″ x 15-1/8″. Extra heavy-duty. Designed for severe-duty transmission oil cooling applications.

Product Features:

Imperial Econo-Kool® tube and fin transmission cooler
Size: 1-1/2″ x 12″ x 15 1/8″
Severe-duty transmission oil cooling applications
Towing with class “A” motor home or towing more than 10,000 lbs.

from

$231.99

Direct replacement – this automatic transmission fluid cooler is designed to match the function of an original cooler on specified vehicle.
Ideal solution – engineered to help maintain proper transmission fluid temperature when an original cooler has failed from heat, corrosion or damage.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Top-Rated Transmission Parts Brands For Your 2010 Ford F-550 Super Duty

Shop for the best-rated brands offering Transmission Parts and other products for your 2010 Ford F-550 Super Duties. Below you’ll find some of our best rated Transmission Parts from Imperial and Dorman, and more. Transmission Parts from these brands that fit a 2010 F-550 Super Duty start at just $7.49 and are rated as high as 4 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Imperial 2010 Ford F-550 Super Duty Transmission Parts

When it comes to maintaining or upgrading your 2010 Ford F-550 Super Duty, using quality Transmission Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Transmission Parts, specifically designed for the 2010 Ford F-550 Super Duty. With over 11 Imperial brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $23.29, with an average price of just $73.34. Plus, with over 110 customer reviews and an average rating of 4 stars, you can trust that our Imperial Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$65.99

This product is not rated

Econo-Kool® Transmission Oil Cooler

“”

from
$32.49

This product is not rated

Transmission Line Fitting Kit

“”

from
$67.99

This product is not rated

High Performance Transmission Oil Cooler

“”

Popular Dorman 2010 Ford F-550 Super Duty Transmission Parts

Dorman auto parts is one of the highest quality Transmission Part brands in the market. Any 2010 Ford F-550 Super Duty owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2010 F-550 Super Duty, Advance Auto Parts carries a full inventory of 12 Dorman Transmission Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Dorman Transmission Parts range from $7.49 to $359.99, plus, with more than 8 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from
$16.99

This product is not rated

Transmission Shift Cable Repair

“”

from
$52.99

This product is not rated

Speed Sensor Harness

“”

from
$54.99

This product is not rated

Transmission Oil Cooler Line: Exact Fit, Metal/Rubber

“”

FAQs for 2010 Ford F-550 Super Duty Transmission Parts

Which Transmission Parts are best-sellers for 2010 Ford F-550 Super Duties?

Out of 85 Transmission Parts that fit 2010 Ford F-550 Super Duties, the following parts are the top sellers:

Clutch Pedal Linkage Bushing (10214659) – $12.29
Transmission Shift Cable Repair (11880633) – $16.99
Transmission Oil Pan Gasket (15780351) – $22.99

What’s the price range for 2010 Ford F-550 Super Duty Transmission Parts?

Transmission Part prices for the 2010 Ford F-550 Super Duty start at $3.99 and go up to $3,402.99 for the most premium parts.

What’s the average price of a Transmission Part for a 2010 Ford F-550 Super Duty?

The average price for Transmission Parts for the 2010 Ford F-550 Super Duty is $364.46. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Ford F-550 Super Duty model years?

Yes, we currently carry Transmission Parts for 25 model years of Ford F-550 Super Duties between 1999 and 2024. Transmission Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Transmission Parts for my 2010 Ford F-550 Super Duty?

The cheapest 2010 Ford F-550 Super Duty Transmission Parts we carry in stock are:

Shift Shaft O-Ring (12009712) – $3.99
Oil Drain Plug Gaske (12108480) – $5.19
Axle Output Shaft Seal (12492263) – $6.79
Transmission Drain Plug – M10 -1.5 (sold by each) (11239876) – $7.49
AT Pump Seal (12593782) – $7.82

What are the top-rated Transmission Parts that fit the 2010 Ford F-550 Super Duty?

Out of 375 reviews by customers, our 2010 Ford F-550 Super Duty Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2010 Ford F-550 Super Duty and their top-rated products:

Transmission Connectors
- Transmission Line Fitting Kit (15230011) – $23.29

What types of Transmission Parts do you sell for my 2010 Ford F-550 Super Duty?

As of 2/5/25, these are some of the most in-demand types of Transmission Parts for a 2010 Ford F-550 Super Duty:

Can I get help with 2010 Ford F-550 Super Duty Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Transmission Parts and more.

What is your return policy for Ford F-550 Super Duty Transmission Parts?

Advance Auto Parts keeps returns simple. For new Ford F-550 Super Duty Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2010 Ford F-550 Super Duty Transmission Parts

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18714)

Dorman – Transmission Cooler Line Quick Connector (Part No.800-617)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA4481)

Dorman – Transmission Drain Plug – M10 -1.5 (Part No.65428)

Dorman – Help – Transmission Vent Valve and hose (Part No.47103)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2971)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243012)

National – Multi Purpose Seal (Part No.710485)

LuK – Pre-Filled Hydraulic Clutch Release System (Part No.CRS023)

Carquest Premium – Automatic Transmission Pressure Control Solenoid (Part No.TCA1202)

National – Oil Seal (Part No.710852)

Dorman – Transmission Output Speed Sensor (Part No.917-641)

SKF – Trans Case Shift Sft (Part No.J7116195413SKF)

Dorman – Help – Transmission Shift Cable Repair (Part No.14908)

National – Multi Purpose Seal (Part No.710718)

NTK – Automatic Transmission Fluid Temperature Sensor (Part No.AT0020)

National – Bearings (Part No.2580)

FAG US – CUP (Part No.LM102910)

Dorman – Transmission Shift Interlock Solenoid (Part No.924-970)

Dorman – Shift Interlock Sole (Part No.J4081704340DOR)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-471)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-890)

FAG US – GENERAL SEAL (Part No.SS2911)

Timken – AT Seal (Part No.J5070228679TIM)

FAG US – CUP (Part No.382A)

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18714)

Mahle – AT Pan Gasket (Part No.J5040196958MAH)

Felpro – AT Pan Gasket (Part No.J5040977612FEL)

Felpro – Oil Drain Plug Gaske (Part No.A6120968478FEL)

Dorman – Help – Clutch Pedal Linkage Bushing (Part No.74014)

Dorman – Help – Transmission Shift Cable Repair (Part No.14908)

Dorman – Transmission Shift Interlock Solenoid (Part No.924-970)

Vemo – AT Solenoid (Part No.J4006366282VMO)

Shift Pro by ETE – 5R110W Automatic Transmission Assembly (Part No.T162620)

Shift Pro by ETE – 5R110W Automatic Transmission Assembly (Part No.T162621)

Moveras – 5R110W – Automatic Transmission (Part No.M01751)

Shift Pro by ETE – 5R110W Automatic Transmission Assembly (Part No.T162615)

Shift Pro by ETE – 5R110W Automatic Transmission Assembly (Part No.T162616)

Shift Pro by ETE – 5R110W Automatic Transmission Assembly (Part No.T162617)

Premium Drive Train – Automatic Transmission Assembly (Part No.T5R1106408T2P)

Premium Drive Train – Automatic Transmission Assembly (Part No.T5R1106408T2)

Premium Drive Train – Automatic Transmission Assembly (Part No.T5R1106408T4P)

Premium Drive Train – Automatic Transmission Assembly (Part No.T5R1106808T2)

Premium Drive Train – Automatic Transmission Assembly (Part No.T5R1106408T4)

Premium Drive Train – Automatic Transmission Assembly (Part No.T5R1106808T4P)

Premium Drive Train – Automatic Transmission Assembly (Part No.T5R1106808T4)

Premium Drive Train – Automatic Transmission Assembly (Part No.T5R1106808T2P)

Carquest Premium – Automatic Transmission Pressure Control Solenoid (Part No.TCA1202)

Dorman – Help – Transmission Vent Valve and hose (Part No.47103)

National – Multi Purpose Seal (Part No.7929S)

National – Multi Purpose Seal (Part No.710485)

National – Multi Purpose Seal (Part No.710718)

USA Standard Gear – ManTransBrg-SealKit (Part No.77923)

National – Multi Purpose Seal (Part No.710537)

National – Multi Purpose Seal (Part No.710719)

Timken – AT Seal (Part No.J5070228679TIM)

SKF – Extension Hsng. Seal (Part No.J5081183447SKF)

National – Multi Purpose Seal (Part No.710483)

National – Multi Purpose Seal (Part No.710717)

FAG – AT Pump Seal (Part No.J5073366524FAG)

Felpro – Axle Output Shaft Seal (Part No.55485)

USA Standard Gear – Shift Shaft O-Ring (Part No.76151)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.3316)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Dorman – Transmission Oil Cooler (Part No.918-216)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243012)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.241018)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-890)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242016)

Imperial – Transmission Oil Cooler (Part No.241015)

Dorman – Transmission Oil Cooler (Part No.918-269)