2010 Ford Explorer Camshafts

Product Features:

• Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
• High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
• Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
• Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.

This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:

• Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
• Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

• Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
• Manufactured in an anti-static environment to ensure reliability and stability.
• Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
• Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Engineered with technology that provides increased accuracy with a stronger, more consistent signal
• Sensors are based on proven hall effect and variable reluctance technology
• Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
• O-rings and seals are included if required.
• Weather-tight connectors prevent leaks and corrosion for better reliability.
• Extensive design validation testing and 100% end-of-line tested.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

• Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
• Manufactured in an anti-static environment to ensure reliability and stability.
• Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
• Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

Designed for 1500-6500 performance. Maximum power in high-RPM with good low-end torque. Matched to Edelbrock performer RPM intakes. 10 to 12 inches of manifold vacuum at idle. More lift and duration than most street camshafts. Dyno matched and street proven performance. Take the guesswork out of camshaft selection! Use only stock ratio Rocker Arms.

Product Features:

• Designed for 1500 to 6500 Performance
• Maximum Power in High-RPM with Good Low-End Torque
• Matched to Edelbrock Performer RPM Intakes
• 10 to 12 in. of Manifold Vacuum at Idle
• More Lift and Duration than Most Street Camshafts
• Dyno Matched/Street Proven Performance
• Take The Guesswork Out Of Camshaft Selection
• Use Only Stock Ratio Rocker Arms

Product Features:

• Designed for Optimum Torque and Acceleration
• Maximum Performance From Idle through Mid-Range
• Matched to Edelbrock Performer Intakes
• Includes Assembly Lube
• Major Improvement in Throttle Response and Torque
• Use For Daily Drivers/Trucks/Vans/RVs/4x4s
• Take The Guesswork Out Of Camshaft Selection

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Unsurpassed quality that you can trust
• Uses leading edge materials
• State-of-the-art manufacturing
• Exacting tolerances
• Meets or exceeds OEM specifications

Encore Automotive Valve Lifter is a steel cylinder designed to maintain zero valve clearance in a combustion engine.

Product Features:

• Precisely tapered and machined to fit the specific application
• Designed to conserve energy by reducing heat escape
• Designed to conserve energy by reducing heat escapeáá

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Unsurpassed quality that you can trust
• Uses leading edge materials
• State-of-the-art manufacturing
• Exacting tolerances
• Meets or exceeds OEM specifications

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

• High-precision and High-quality components used in all KITs
• Coverage of classic and new high-tech solutions for the best system coverage

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Validated for fit, form and function
• Unsurpassed quality you can trust

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
• Resistance to EP lubricants
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Validated for fit, form and function
• Unsurpassed quality you can trust

Install an ARP cam bolt kit and end your camshaft timing worries ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added features include oversized bolt head flange for cam button retention and reduced socket head size to facilitate easy installation and removal. Available in both High Performance and Pro Series kits.

Product Features:

• Arp Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
• Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
• Increased Material Strength Overcomes Valve Train Harmonics And Stress
• Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
• M12 X 1.50 RH Thread Size
• 1.7″ Underhead Length