2010 Ford Expedition Steering and Chassis Parts

Name: Remanufactured Rack and Pinion Assembly
Brand: Cardone
SKU: 22-297
Price: 289.99 USD

Below you will find various in-demand Ford Steering and Chassis Parts, components and accessories for your 2010 Expedition. Advance Auto Parts has popular Expedition parts like Steering Shafts, Tie Rods, Power Steering Parts and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Expedition model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2010 Ford Expedition Steering and Chassis Parts below and start saving instantly.

Popular 2010 Ford Expedition Steering and Chassis Parts Categories

Power Steering Coolers

Suspension Ball Joint Kits

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Alignment Caster Adjustment Spacers

Caster and Camber Kits

Power Steering Pump Pulleys

Power Steering Pressure Hoses

Power Steering Pressure Switches

Power Steering Pump Caps

Tie Rod End Boots

Power Steering Reservoirs

Sway Bar Link Bushing Kits

Power Steering Return Hoses

Rack and Pinion Boots

Sway Bar Bushings

Power Steering Pressure Switch Connectors

Steering Knuckle Seals

Essential Steering and Chassis Parts for 2010 Ford Expeditions

from

$289.99

CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$207.99

This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$60.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$22.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Incorporates proven design and engineering features

from

$167.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$73.99

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$93.40

TRW stabilizer links are manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match the Original Equipment design, which provides improved fuel economy, lower emissions and excellent driving comfort.

Product Features:

Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
Provides improved fuel economy, lower emissions and excellent driving comfort
Reduce weight and damping vibrations
Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions

from

$38.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$20.29

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap.
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$28.49

Product Features:

Power steering oil cooler
3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$27.99

RACK BELLOW

from

$233.05

P/S Pump

from

$86.99

Allows up to 2 Degrees caster change

from

$139.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$5.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$36.99

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$24.99

REGULATOR ASY

from

$131.99

This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation.
Complete assembly – includes reservoir and reservoir cap.
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$58.99

Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:

100% testing ensures leak-free performance.
Designed to match O.E. fit, function and performance.
Manufactured from O.E. grade material for strength and durability.
Resistant to cracking caused by the high temperatures in the engine compartment.
Reservoirs with integrated filter have the same filtration efficiency as O.E.

from

$29.99

Ball Joint

from

$57.99

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$33.99

This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications.
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$51.97

An integral part of the drive system for belt-driven steering pumps. Dorman’s Power Steering Pump Pulley helps restore power steering to proper functioning. The pulley is recommended for replacement whenever you service the power steering pump.

Product Features:

High quality plastic and/or steel construction
Easy installation
Direct replacement for a proper fit every time
Quality-tested to ensure trouble-free performance and durability

from

$92.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installationá
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

from

$426.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$641.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

Upgrade your 2010 Ford Expedition with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2010 Ford Expedition, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Expedition functioning at its best. At Advance Auto Parts, we offer a wide selection of 99 Steering and Chassis Parts for the 2010 Ford Expedition, designed to meet your needs without breaking the bank. From Steering Shaft replacements to Tie Rods upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2010 Ford Expedition at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $5.80 to $1,136.99, with an average price of $106.54. Our 99 Steering and Chassis Parts in stock come from 19 trusted brands, so you’re sure to find the right part for your 2010 Ford Expedition without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 Ford Expedition, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Imperial, Moog, Carquest Premium, and more. Imperial Steering and Chassis Parts start at just $11.49 and boast an impressive 4 stars average rating from customers. Moog and Carquest Premium also bring quality to the table, with Steering and Chassis Parts available starting at $13.29, and at an average 4 stars rating. With 2,376 customer reviews and counting, our 2010 Ford Expedition Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2010 Ford Expedition is always ready to roll. We’re committed to providing you with everything you need to keep your Expedition in top shape, all in one place. Start shopping confidently below for your 2010 Ford Expedition!

Best-Selling Steering Shafts for 2010 Ford Expeditions

Enhance the driving experience in your Ford with 3 quality Steering Shaft components, starting at $228.99.

show more show less

from

$228.99

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models.
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision.
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$255.20

Steering Coupling

from

$234.99

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models.
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision.
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

Most Popular 2010 Ford Expedition Tie Rods

Customize your Ford with 16 Tie Rods products like Tie Rod Ends and Tie Rod End Boots, all priced under $167.99.

show more show less

from

$49.49

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$94.99

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$94.99

Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$43.49

Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Thread locking compound included.

from

$102.99

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$102.99

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$117.21

Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:

Delphi tie rods are fatigue tested to avoid failure
Delphi includes the necessary accessories for a complete job
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

from

$167.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$167.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$77.03

The perfect fit for Ford and Lincoln chassis parts

Product Features:

High-quality forging material for strength and durability
Engineered for easy installation
Incorporate the latest Ford Motor Company-approved designs, materials and hardware to help ensure top performance

from

$72.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$65.48

Tie Rod End

from

$56.41

Tie Rod End

from

$56.41

Tie Rod End

from

$52.61

Tie Rod End

from

$18.29

Ties rods and ball joints are important components in the overall suspension equation, yet they are supplied with inferior rubber boots that deteriorate and tear over time. Replacing them with Daystar Dust Boots will increase the durability and longevity of these important suspension components. Unless otherwise stated, they are offered in universal applications so have the stud and overall joint diameters on hand.

Product Features:

Durable Polyurethane Material
Keeps Out Dust
Made In USA
Easy To Install

Top Picks for 2010 Ford Expedition Power Steering Parts

Upgrade Ford Expeditions with top-quality Power Steering Parts parts, including 37 OEM and aftermarket selections for your 2010 model.

show more show less

from

$20.29

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap.
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

from

$33.99

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications.
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$48.49

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$46.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$11.49

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Atermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$73.99

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$31.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$20.79

Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting

from

$36.99

3/4″ x 5″ x 9-1/4″ power steering oil cooler heavy duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.

Product Features:

Heavy-duty power steering oil cooler
Size: 3/4″ x 5″ x 9-1/4″
For vehicle with 3/8″ ID power steering return hose
Removes destructive heat and helps prolong power steering system life

from

$103.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$52.16

High quality plastic and/or steel construction
Easy installation
Direct replacement for a proper fit every time
Quality-tested to ensure trouble-free performance and durability

from

$31.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$38.49

from

$97.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$464.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$133.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$30.99

Easy to install
Manufactured using premium materials
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$1136.99

Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:

PWR Rack and Pinions are 100% NEW and Engineered In North America
All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
Includes: Factory Installed OE Mounting Bushings, Inner Tie Rods, Jam Nuts (as required), Precision Routed Fluid Transfer Lines, required Installation Seals, Hardware, and Instructions
Precision Routed and Constructed Fluid Transfer Tubes
Manufactured to meet or exceed OE requirements
Engineering, test, and quality validation in the USA

from

$216.99

Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.

Product Features:

Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
Meets or exceeds O.E. performance.

from

$163.04

The Motorcraft Power Steering Pressure Line Assembly is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

OES replacement part for your vehicle’s original factory component
Offering the quality, reliability, and durability of OES
Manufactured to OES specification for fit, form, and function

from

$426.43

Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:

OE quality and direct fit replacement
Remanufacture based on highest quality standards
Computerized tests insure that all products meet the OE performance specification.
Performance and quality approvals from OE steering gear and pump manufacturers world wide

from

$163.04

P/S Pressure Hose

from

$131.99

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation.
Complete assembly – includes reservoir and reservoir cap.
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$108.92

P/S Return Hose

from

$103.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

Elite Pressure Hose; 14mm Male Captive "O" Ring x 16mm Swivel "O" Ring - with Switch Port

from

$102.99

Built to withstand a variety of weather conditions and extreme temperatures, our power steering pressure hoses are designed to last through daily wear and tear while delivering smooth and quiet performance, every time. Each hose in the Edelmann Elite line has a durable zinc coating that actively protects against and helps to prevent rust and corrosion damage, and each hose also features innovative heat/abrasion tubing that is specifically designed to hold up to a range of temperatures – from the freezing cold to extreme heat waves. Each hose features double lock beading with a barbed tube end that provides superior hose/coupling integrity. Every Edelmann Elite hose is equipped with the identical OEM fitting as the hose being replaced. This ensures a good seal when installed properly. All bends are made to the exact specification of the OEM hose. This ensures that the hose will fit in the space provided and takes the course of the original OEM hose. Plews & Edelmann is a leading designer, manufacturer and distributor of a broad range of automotive parts, accessories, gadgets, and tools sold to the vast majority of mass merchant, retail auto parts stores and wholesale automotive parts and industrial distribution outlets worldwide.

Product Features:

Superior temperature range performance ensures function at any temperature.
Outstanding impulse durability increases longevity of the hose.
Constructed to OEM form, fit, and function to ensure ease of installation and ongoing performance.

from

$65.29

The Motorcraft Power Steering Return Line Assembly is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

OES replacement part for your vehicle’s original factory component
Offering the quality, reliability, and durability of OES
Manufactured to OES specification for fit, form, and function

from

$57.99

Protects Rack & Pinion surfaces from contamination
Hardware included

from

$52.99

NEW P/S PULLEY

from

$28.99

All Steering Power Filter

from

$28.99

All Steering Power Filter

from

$28.99

POWER STEERINGFILTER

from

$27.99

RACK BELLOW

from

$24.99

REGULATOR ASY

from

$6.99

POWER STEERINGFILTER

In-Demand Sway Bars for 2010 Ford Expeditions

Select from 11 premium Sway Bars parts for your 2010 Ford Expedition, with prices ranging from $13.29 to $81.99.

show more show less

from

$42.49

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$39.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$55.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$27.49

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$17.99

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$13.29

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$81.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$75.27

The right choice for Ford and Lincoln chassis parts

Product Features:

Tie rod ends and socket-style sway bar links feature wrench flats, when feasible, to aid installation
Greasable links to support ongoing maintenance, where applicable
Engineered for easy installation

from

$44.57

Sway Bar Link

from

$29.49

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$21.29

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

Most Sold 2010 Ford Expedition Ball Joints

Explore our best-selling Ford parts for the 2010 Expedition among 27 OEM and aftermarket options starting from $45.99.

show more show less

from

$58.99

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$114.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

KEEPS DIRT AND WATER OUT –┐Pre-installed dust bootáseal provides an effective barrier againstáwear-causing contaminants┐á
CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installationá

from

$159.99

MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.

Product Features:

PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride

from

$159.99

MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.

Product Features:

PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride

from

$45.99

Ball Joint

from

$114.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installationá
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

from

$80.99

Rigorously tested by a team of product and quality engineers, our Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride.

Product Features:

Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
Direct replacement for a trouble-free installation
Steel, iron or aluminum construction ensures durability
Powder-coated or painted for long-lasting rust and corrosion resistance

from

$102.99

CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest

Product Features:

Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
Corrosion-resistant electro-coating on steel control arms to reduce rust and extend service life.
Pre-installed ball joints and bushings (when applicable) for easy installation
Hardware included for easier installation
Hardware included for easier installation
Product tested in accordance with SAE Spec J193, ensuring ball joint assemblies meet all cuntional requirements of the application.

from

$102.99

Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
Corrosion-resistant electro-coating on steel control arms to reduce rust and extend service life.
Pre-installed ball joints and bushings (when applicable) for easy installation
Hardware included for easier installation
Hardware included for easier installation
Product tested in accordance with SAE Spec J193, ensuring ball joint assemblies meet all cuntional requirements of the application.

from

$53.99

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Knurling improves retention between the control arm/knuckle and ball joint housing
Snap ring design adds an additional safety feature to secure the ball joint in the knuckle

from

$251.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$251.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$78.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
GREASEABLE SOCKETá–┐Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants┐
HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installationá
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

from

$60.99

PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$75.42

Ball Joint

from

$184.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$284.99

MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.

Product Features:

PROBLEM SOLVER GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shield socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
RIGOROUS TESTING — Tested to handle loads exceeding those required by the manufacturer

from

$284.99

MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.

Product Features:

PROBLEM SOLVER GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shield socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
RIGOROUS TESTING — Tested to handle loads exceeding those required by the manufacturer

from

$213.99

Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
Corrosion-resistant electro-coating on steel control arms to reduce rust and extend service life.
Pre-installed ball joints and bushings (when applicable) for easy installation
Fully polished ball studs combined with synthetic bearing technology for maintenance-free smooth operation and improved reliability
Hardware included for easier installation

from

$213.99

Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
Corrosion-resistant electro-coating on steel control arms to reduce rust and extend service life.
Pre-installed ball joints and bushings (when applicable) for easy installation
Fully polished ball studs combined with synthetic bearing technology for maintenance-free smooth operation and improved reliability
Hardware included for easier installation

from

$164.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$90.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$90.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$78.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Engineered to match or exceed OE requirements
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose

from

$78.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$53.99

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Knurling improves retention between the control arm/knuckle and ball joint housing
Snap ring design adds an additional safety feature to secure the ball joint in the knuckle

from

$48.79

Ball Joint

Top-Rated Steering and Chassis Parts Brands For Your 2010 Ford Expedition

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2010 Ford Expeditions. Below you’ll find some of our best rated Steering and Chassis Parts from Imperial, Moog, and Carquest Premium, and more. Steering and Chassis Parts from these brands that fit a 2010 Expedition start at just $11.49 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Imperial 2010 Ford Expedition Steering and Chassis Parts

When it comes to maintaining or upgrading your 2010 Ford Expedition, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Steering and Chassis Parts, specifically designed for the 2010 Ford Expedition. With over 4 Imperial brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $25.44. Plus, with over 127 customer reviews and an average rating of 4 stars, you can trust that our Imperial Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$20.79

(4)

Transmission Oil Cooler Reinstallation Kit

“They did not actually ahve teh kit when i got this so the erverice rep just made teh order up from bits off the shelf. The clips and hose was all the ”

from
$11.49

(27)

Mounting Kit System

“Perfect for my transmission cooler holds it very good in place”

from
$32.49

(94)

Transmission Oil Cooler Hose

“its a hose what cam I say”

Popular Moog 2010 Ford Expedition Steering and Chassis Parts

Moog auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2010 Ford Expedition owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 2010 Expedition, Advance Auto Parts carries a full inventory of 26 Moog Steering and Chassis Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Moog Steering and Chassis Parts range from $13.29 to $284.99, plus, with more than 83 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from
$102.99

This product is not rated

Tie Rod End

“”

from
$102.99

This product is not rated

Tie Rod End

“”

from
$251.99

This product is not rated

Control Arm and Ball Joint Assembly

“”

FAQs for 2010 Ford Expedition Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2010 Ford Expeditions?

Out of 99 Steering and Chassis Parts that fit 2010 Ford Expeditions, the following parts are the top sellers:

New Power Steering Filter (10417593) – $31.99
Ball Joint (21880504) – $58.99
Control Arm and Ball Joint Assembly (10225892) – $114.99

What’s the price range for 2010 Ford Expedition Steering and Chassis Parts?

Steering and Chassis Part prices for the 2010 Ford Expedition start at $5.80 and go up to $1,136.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2010 Ford Expedition?

The average price for Steering and Chassis Parts for the 2010 Ford Expedition is $106.54. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Ford Expedition model years?

Yes, we currently carry Steering and Chassis Parts for 27 model years of Ford Expeditions between 1997 and 2024. Steering and Chassis Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Steering and Chassis Parts for my 2010 Ford Expedition?

The cheapest 2010 Ford Expedition Steering and Chassis Parts we carry in stock are:

Wheel Seal (12172336) – $5.80
POWER STEERINGFILTER (50167394) – $6.99
Mounting Kit System (6014844) – $11.49
Stabilizer Bar Bushing Kit (11620203) – $13.29
Stabilizer Bar Bushing Kit (11620237) – $17.99

What are the top-rated Steering and Chassis Parts that fit the 2010 Ford Expedition?

Out of 2,376 reviews by customers, our 2010 Ford Expedition Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2010 Ford Expedition and their top-rated products:

Sway Bars
- Stabilizer Bar Link (21880439) – $39.99
- Stabilizer Bar Link Kit (11919547) – $42.49
- Stabilizer Bar Link (21880658) – $55.99
Tie Rods
- Stabilizer Bar Link (21880439) – $39.99
- Stabilizer Bar Link Kit (11919547) – $42.49
- Stabilizer Bar Link (21880658) – $55.99

What types of Steering and Chassis Parts do you sell for my 2010 Ford Expedition?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2010 Ford Expedition:

Can I get help with 2010 Ford Expedition Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Steering and Chassis Parts and more.

What is your return policy for Ford Expedition Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Ford Expedition Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2010 Ford Expedition Steering and Chassis Parts

Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-297)

Dorman – Lower Steering Shaft (Part No.425-396)

MOOG – Ball Joint (Part No.K8695T)

MOOG – Stabilizer Bar Link (Part No.K80103)

Rare Parts – Tie Rod End (Part No.RP29012)

MOOG – Caster/Camber Adjusting Kit (Part No.K100070)

TRW – Stabilizer Link (Part No.L1030288469TRW)

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1019)

Dorman – Help – Power Steering Reservoir Caps (Part No.82726)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Imperial – Power Steering Oil Cooler (Part No.241009)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Dorman – RACK BELLOW (Part No.541-542)

Motorcraft – P/S Pump (Part No.M2010675179MTR)

MOOG – Caster/Camber Adjusting Kit (Part No.K80069)

Carquest Premium – Power Steering Return Hose, 11mm Male Captive "O" Ring x 1/2" Beaded Tube (Part No.38228)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

MOOG – Stabilizer Bar Bushing Kit (Part No.K201362)

Motorcraft – REGULATOR ASY (Part No.WPT-169)

Dorman – Power Steering Fluid Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-846)

Cardone New – New Power Steering Reservoir (Part No.3R-912)

Driveworks – Ball Joint (Part No.DW-K8695T006)

MOOG – Ball Joint (Part No.K500060)

Dorman – Power Steering Pump Pulley (Part No.300-010)

Dorman – Power Steering Pump Pulley (Part No.M2060684369DOR)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK8722)

Dorman – Suspension Control Arm (Part No.521-040)

Dorman – Suspension Control Arm And Ball Joint Assembly (Part No.527-027)

Dorman – Lower Steering Shaft (Part No.425-366)

MTC – Steering Coupling (Part No.M5020296523MTC)

Dorman – Upper Steering Shaft (Part No.425-387)

MOOG – Tie Rod End (Part No.EV800457)

Carquest Premium – Tie Rod End (Part No.310-258602)

Carquest Premium – Tie Rod End (Part No.310-258601)

Carquest Premium – Tie Rod End (Part No.700-258603)

MOOG – Tie Rod End (Part No.ES800514)

MOOG – Tie Rod End (Part No.ES800515)

Delphi – Tie Rod End (Part No.M30101450689DEL)

Rare Parts – Tie Rod End (Part No.RP29011)

Rare Parts – Tie Rod End (Part No.RP29012)

Motorcraft – Motorcraft Tie Rod End (Part No.M3010335909MTR)

Rare Parts – Tie Rod End (Part No.RP28928)

CTR – Tie Rod End (Part No.M3010335906CTR)

Autopart International Inc – Tie Rod End (Part No.M30102539557API)

Autopart International Inc – Tie Rod End (Part No.M30102539620API)

Autopart International Inc – Tie Rod End (Part No.M30102539648API)

Daystar – Top 19/32" Outside Dia/Bottom 1-3/8" Outside Dia, Black, Polyurethane, Set Of 2 (Part No.KU13001BK)

Dorman – Help – Power Steering Reservoir Caps (Part No.82726)

Dorman – Power Steering Pump Pulley (Part No.300-010)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Imperial – Mounting Kit System (Part No.226201)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Male Captive "O" Ring x 16mm Swivel "O" Ring – with Switch Port (Part No.37458)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Cardone – New Power Steering Filter (Part No.20-0038F)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Imperial – Power Steering Oil Cooler Heavy Duty (Part No.241011)

Cardone – Remanufactured Power Steering Pump (Part No.20-389)

Dorman – Dorman Power Steering Pump Pulley (Part No.M2060208154DOR)

Cardone – Power Steering Filter (Part No.20-P038F)

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1019)

Carquest Premium – Power Steering Return Hose, 1/2" I.D. Hose x 1/2" I.D. Hose (Part No.40529)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-2039)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Carquest Premium – Power Steering Return Hose, 11mm Male Captive "O" Ring x 1/2" Beaded Tube (Part No.38392)

MOOG – Rack & Pinion Bellows Kit (Part No.K150291)

PWR – New Hydraulic Power Rack and Pinion (Part No.42-2684)

Cardone New – New Power Steering Pump (Part No.96-389)

Motorcraft – Power Steering Pressure Line Assembly (Part No.M2015847485MTR)

Maval – Complete Steering Rack, Remanufactured (Part No.M1000422460MAV)

Gates – P/S Pressure Hose (Part No.M20151068869GAT)

Dorman – Power Steering Fluid Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-846)

Motorcraft – P/S Return Hose (Part No.M2016523323MTR)

Carquest Premium – 3/8" I.D. Molded Return Hose (Part No.40537)

Edelmann – Elite Pressure Hose; 14mm Male Captive "O" Ring x 16mm Swivel "O" Ring – with Switch Port (Part No.92383E)

Motorcraft – Power Steering Return Line Assembly (Part No.M2016523318MTR)

Rare Parts – R & P BELLOWS (Part No.RP57344)

Atlantic Automotive Eng – NEW P/S PULLEY (Part No.PU100-051)

BBB Industries – Power Steering Filter (Part No.991-FLT4)