2010 Chrysler PT Cruiser Shocks and Struts
More 2010 Chrysler PT Cruiser Shocks and Struts
Find your specific 2010 Chrysler PT Cruiser original or aftermarket Shocks and Struts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2010 Chrysler PT Cruiser Shocks and Struts
KYB – STRUT MOUNT (Part No.L3030112660KYB)
from
$66.69
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The highest quality replacement strut mount available
- Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
- Superior rubber reduces noise, vibration and harshness
- Mount bearings provide smoother steering and help retain front end alignment
- Matched grade studs and nuts
MOOG – Suspension Strut Mount (Part No.K7375)
from
$58.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE requirements
- Superior rubber to steel bonding for durability
- High polish chrome steel bearing races
- Replacement helps restore vehicle handling
- Includes new spring seat insulator and installation hardware to eliminate noise issues
- Electroplate and corrosion-resistant coating to help prevent galvanic corrosion
KYB – Strut mount (Part No.SM5265)
from
$37.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The Highest Quality Replacement Strut Mount Available
- Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
- Superior Rubber Reduces Noise, Vibration And Harshness
- Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
- Matched Grade Studs And Nuts
Driveworks – Strut Bellow (Part No.DW-K90463)
from
$7.99
Driveworks Shock Mount, Suspension Strut Bellows
Product Features:
See More
Product Features:
- Designed to meet or exceeds OE performance specifications
- Durable neoprene rubber
Energy Suspension – Bump Stop Set (Part No.5.6107R)
from
$33.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Helps Prevent Damage to Shocks/Struts
Energy Suspension – Bump Stop Set (Part No.5.6107G)
from
$32.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Helps Prevent Damage to Shocks/Struts
Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55989)
from
$62.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic passenger cars
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.L4000570122MNR)
from
$56.87
TWIN TECHNOLOGY TUNED FOR EXCEPTIONAL CONTROL The Monroe OESpectrum shock absorbers feature our latest, global, original equipment valving technologies for domestic and foreign nameplate applications. Monroe OESpectrum units provide an unprecedented level of handling precision and control while filtering out ride harshness. This unique blend of control and comfort is made possible through Tenneco’s Twin Technology Active Control System, an exclusive internal damping control technology. Tenneco’s Twin Technology consists of the latest Impact Control Valve (ICV), delivers exceptional control by regulating the flow of fluid which helps control vehicle roll and isolate road impact, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration, and harshness experienced with rough, bumpy road conditions.
Product Features:
See More
Product Features:
- All Weather Fluid – Contains special modifiers to reduce friction and ensure smooth rod reaction.
- Full Displaced Valving – Better valving range on both the compression and extension cycles.
- Fluon Banded Piston – The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
- 1-3/16 inch Bore – Lower operating pressure than standard 1 inch bore units
- Twin Tube Technology – Impact Control Valve (ICV), which delivers exceptional control under virtually all driving conditions, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
- Nitrogen Gas Charged – For improved ride and handling, helps maintain tire to road contact by reducing aeration.
- 1/2 inch Diameter Piston Rod – Nitrocarburized rod for long service life. (On non-dust shield units only)
- Special Seal – Self-lubricating fluid seal designed to retain gas without excessive wear or friction.
KYB – Excel-G Shock Absorber (Part No.L4000180286KYX)
from
$58.36
The KYB Excel-G OE-equivalent direct fit shock absorber is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Restores a vehicle’s originally designed handling and control
Product Features:
See More
Product Features:
- Direct fit application for ease of installation
- Calibrated to compensate for worn suspensions
- Components and valving are designed specifically for each application
- The best choice to restore OE performance and normal driving conditions
- Built with quality that matches or exceeds OE
- Coverage for domestic and import cars, trucks, vans, minivans, and SUVs
KYB – Gas-a-Just Shock Absorber (Part No.L4000321707KYB)
from
$55.97
The KYB Gas-a-Just shock absorber is engineered to significantly increase vehicle stability, handling and performance. Significantly increases vehicle stability, handling, and control over twin-tube designs. The KYB Gas-a-Just shock absorber is a more responsive mono-tube design that automatically adjusts to driving conditions and is an ideal upgrade from an OE twin-tube design.
Product Features:
See More
Product Features:
- Direct fit application for ease of installation
- Gas-a-Just is the replacement for an OE monotube shock
- Ideal as an upgrade from an OE twin-tube
- The more responsive monotube design automatically adjusts to driving conditions
- Applications for cars, trucks, vans, and SUVs
TRW – Twin Tube Shock Absorber (Part No.L4000852502TRW)
from
$52.70
TRW Shocks and Struts are intelligently engineered to restore original handling dynamics while designed to meet the highest safety, comfort, performance, and quality standards. TRW products have the best dampening characteristics with an application-tuned
Product Features:
See More
Product Features:
- TRW micro-polished chromed piston rods have been hardened for maximum strength to provide the longest service life. Our chrome finish helps fight rust while the low-friction surface effectively prevents seal leakage.
- TRW advanced seal technology uses a special NBR rubber which is highly wear resistant and can withstand temperatures to 260 degrees F, keeping oil in and contaminants out.
- Engineered with low friction movement in mind, our design helps maintain the original tuning characteristics.
- Our high quality valve design enables precise oil flow by using sintered metal valve construction. Tight tolerances and strength from sintered metal allow for precise tuning of compression and rebound rates that restore the original handling dynamics.
- TRW working cylinders are drawn to precise dimensions and polished ultra-smooth to prevent piston band wear. Our technology permits close tuning tolerances while reducing friction and heat for the utmost endurance.
- Twin-tube Design
International Suspension Group – Ride Control Shock Absorber (Part No.L4000654340ISG)
from
$49.22
The International Suspension Group advanced engineering team designed the Ride Control Valving to allow these premium shocks to sense the vehicles velocity and road conditions. The Ride Control shocks adjust constantly to the road for enhanced performance, ensuring superior handling, ride control and comfort.
Product Features:
See More
Product Features:
- Vented Striker Plate – Eliminates seal damage and prolongs strut life
- Teflon Banded Piston Seal – Provides superior sealing
- Multi-Shim Valve – For superior handling control and comfort
- Twin Tube Design – For extra protection, strength and durability
- Micro-polished Double Chrome plated Piston – Extra protection against pitting and rusting
- PBT Bump Stop – Dampens noise and stops metal to metal contact
- Machine Mounting Eyes – Seamless for strength and durability
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5989)
from
$92.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
MOOG – Strut Bellows (Part No.K90463)
from
$16.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
KYB – Jounce Bumper and Bellows (Part No.SB104)
from
$23.79
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Monroe – Strut-Mate Strut Boot Kit (Part No.63619)
from
$21.49
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
KYB – Gas Strut (Part No.235626)
from
$86.99
Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
Product Features:
See More
Product Features:
- KYB Recommended Orem Replacement Strut
- The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Chrysler Pt Cruiser
- The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
- Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
- KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
- To Reduce The Chance Of Noise And Vibration KYB Recommends Installing New Strut Mounts, Part Number: Sm5265
- Protect Your New Struts From Dirt, Debris And Salt With A KYB Strut Boot, Part Number: Sb104
International Suspension Group – Ride Control Strut Assembly (Part No.L3000654090ISG)
from
$99.71
The International Suspension Group advanced engineering team designed the Ride Control Valving to allow these premium struts to sense the vehicles velocity and road conditions. The Ride Control struts adjust constantly to the road for enhanced performance, ensuring superior handling, ride control and comfort.
Product Features:
See More
Product Features:
- Vented Striker Plate – Eliminates seal damage and prolongs strut life
- Teflon Banded Piston Seal – Provides superior sealing
- Multi-Shim Valve – For superior handling control and comfort
- Twin Tube Design – For extra protection, strength and durability
- Micro-polished Double Chrome plated Piston – Extra protection against pitting and rusting
- PBT Bump Stop – Dampens noise and stops metal to metal contact
- Machine Mounting Eyes – Seamless for strength and durability
KYB – Excel-G Strut Assembly (Part No.L3000112215KYX)
from
$130.46
The KYB Excel-G OE-equivalent direct fit Strut Assembly is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Restores a vehicle’s originally designed handling and control. The KYB Excel-G is identical to the GR2 except for the product name and paint color.
Product Features:
See More
Product Features:
- Direct fit application for ease of installation
- Calibrated to compensate for worn suspensions
- Components and valving are designed specifically for each application
- The best choice to restore OE performance and normal driving conditions
- Built with quality that matches or exceeds OE
- Coverage for domestic and import cars, trucks, vans, minivans, and SUV,s
Monroe – OESpectrum Strut (Part No.71592)
from
$101.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
- LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
- OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
- Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
Monroe – Gas-Matic Strut (Part No.81592)
from
$65.99
Monroe® Gas-Matic passenger car struts are gas charged and provide improved control at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic passenger cars
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Monroe – Quick-Strut Complete Strut Assembly (Part No.L3002569812MNR)
from
$200.70
THE FIRST COMPLETE, READY-TO-INSTALL STRUT ASSEMBLY The revolutionary Monroe Quick-Strut unit is the first complete, ready-to-install replacement strut assembly available! Monroe Quick-Strut units include all the components required for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement bearing plate, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each Quick-Strut assembly features application-engineered valving to optimize each vehicle’s unique ride and handling characteristics. Available for popular passenger car, light truck and SUV applications.
Product Features:
See More
Product Features:
- OE-style bearings and Plate
- SAE-grade nuts and bolts
- Premium strut technology based on application
- Ride Control Technology
- Durable Strut Boot Kit
- Vehicle Calibrated High Quality Spring
- All components manufactured to meet or exceed OE performance
- Limited Lifetime Warranty
Popular 2010 Chrysler PT Cruiser Shocks and Struts Categories
2010 Chrysler PT Cruiser Shocks and Struts
Maybe you’re in the middle of a full rebuild of that 2010 Chrysler PT Cruiser. Maybe you just need a couple of Shocks and Struts. Either way, Advance Auto Parts has 22 different Shocks and Struts in our inventory ranging from $7.99 to $200.70. That means you can find the exact parts or products you need to keep that 2010 Chrysler PT Cruiser running smoothly.
Shocks and Struts are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 2010 Chrysler PT Cruiser. Monroe, DriveWorks, and Moog are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Shocks and Struts for your 2010 Chrysler PT Cruiser, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 118 reviews in this category, some of the top rated parts include Jounce Bumper and Bellows with 3.3 stars and Excel-G Shock Absorber with 4.0 stars.
So if you’re in the market for aftermarket Shocks and Struts to keep your 2010 Chrysler PT Cruiser rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Shocks and Struts Brands To Make Your 2010 Chrysler PT Cruiser Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2010 Chrysler PT Cruiser demands trusted brand parts and products to keep it running. Many trusted brands of Shocks and Struts make up Advance Auto Parts’ inventory, and all are ready to help make your PT Cruiser the best it can be. Be sure to browse some of our top Shocks and Struts brands and parts.
Popular Monroe Shocks and Struts
We carry Monroe parts in our stock across Front Shock and Struts and Rear Shock and Struts categories, plus more. For a 2010 Chrysler PT Cruiser, our most popular Monroe Shocks and Struts include:
Top 2010 Chrysler PT Cruiser Shocks and Struts from Monroe
Monroe products are another trusted brand when it comes to Shocks and Struts for your 2010 Chrysler PT Cruiser. Popular Monroe parts include:
FAQs for 2010 Chrysler PT Cruiser Shocks and Struts
What are the most purchased Shocks and Struts for the 2010 Chrysler PT Cruiser?
Out of 22 Shocks and Struts for the 2010 Chrysler PT Cruiser, the most popular in our inventory are:
What are the top-rated 2010 Chrysler PT Cruiser Shocks and Struts?
Top-rated Shocks and Struts for your 2010 Chrysler PT Cruiser based on customer reviews/ratings are:
from
$23.79
(3)
Jounce Bumper and Bellows
“the KYB dirt cover and rebound bumper fit as advertised. the quality looks to be good. what more can i say right now?”
from
$58.36
(1)
Excel-G Shock Absorber
“The lower mount was too big for my 2001 PT Cruiser bracket. Not a simple, easy bolt on job for this make and model vehicle.”
