2010 Chevrolet Camaro Performance and Racing Products
Find Your Specific 2010 Chevrolet Camaro Performance and Racing Products
Below you will find various in-demand Chevrolet Performance and Racing Products, components and accessories for your 2010 Camaro. Advance Auto Parts has popular Camaro parts like Performance Oil Filters, Performance Air Intake Kits, Performance Steering Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Camaro model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2010 Chevrolet Camaro Performance and Racing Products below and start saving instantly.
Popular 2010 Chevrolet Camaro Performance and Racing Products Categories
Essential Performance and Racing Products for 2010 Chevrolet Camaros
Competition Cams – High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6. (Part No.812-1)
from
$13.99
High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6.
Competition Cams – Thumpr 227/241 Hydraulic Flat Cam and Lifter Kit (Part No.CL12-600-4)
from
$914.99
SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Thumpr : High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
Product Features:
See More
Product Features:
- Cam and lifter kit for Small Block Chevy engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – Thumpr : High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
- 279/297 Advertised Duration, 227/241 Duration @ .050″, .479″/.465″ Lift, 107 Lobe Separation
- Valve spring upgrade required
Hooker Headers – Super Comp. Header (Part No.2205-1HKR)
from
$1500.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Energy Suspension – Sway Bar Bushing Set (Part No.3.5105G)
from
$48.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Hays – Flywheel: GM Ls-1 30Lb Steel (Part No.10-730)
from
$527.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
Edelbrock – Water Pump Big-Block Chevy Short/Standard in Black Finish (Part No.88503)
from
$423.99
Edelbrock #88503 Water Pump big block Chevy short black ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooling” Water Pu
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.625 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 5.750 in. Block To Hub Height
- Black Finish
Energy Suspension – Control Arm Bushing Set (Part No.3.3105R)
from
$116.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Competition Cams – Thumpr 235/249 Hydraulic Flat Cam (Part No.11-601-4)
from
$395.99
HYDRAULIC – Mutha’ Thumpr: High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.
Product Features:
See More
Product Features:
- HYDRAULIC – Mutha’ Thumpr: High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.
- 287/304 Advertised Duration, 235/249 Duration @ .050″, .510″/.495″ Lift, 107 Lobe Separation
- Valve spring upgrade required
Dynomax – Direct Fit Manifold Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.51070)
from
$48.49
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from stainless steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Bully Dog – Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device (Part No.40417)
from
$469.99
This Bully Dog GT Platinum tuner is four products in one: a vehicle engine tuner, monitor, gauge, and diagnostic device.ÿ
Product Features:
See More
Product Features:
- Dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy, and providing a comprehensive set of monitoring features and diagnostic functions.
- Bully Dog GT Platinum tuners are incomparable to other tuning products because they have the largest feature set and the widest range of vehicle applications available.
- Product might not be available in all states due to local laws.
Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1074)
from
$101.99
Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.
Product Features:
See More
Product Features:
- Black Oxide Coated Grade 8 Steel
- Kit Contains 16 Studs
- Easy To Install
- Heat Treated Steel
- Prevents Stud Flexing
- Black Plated Finish
NOS/Nitrous Oxide Systems – LS2 Plate; Nitrous System (Part No.05169NOS)
from
$1500.99
The NOS LS2 plate system uses a billet plate with no spray bars. This unique design allows better atomization which prevents fuel puddles in your manifold and provides the best cylinder to cylinder distribution for maximum power. This is no ordinary low HP kit. The plate and Solenoids supplied will easily support 200HP.
Product Features:
See More
Product Features:
- Adjustable Up to 250 HP
- Includes Required Hardware For Most Applications
- On Demand Power
- Does Not Affect Daily Driving Characteristics
- Best Horsepower Per Dollar Modification Available
NOS/Nitrous Oxide Systems – NOS Plate Wet Nitrous System – GM (Part No.05164BNOS)
from
$1463.00
Product Features:
See More
- Fits GM LS engines with drive-by-wire style 90mm or 92mm throttle body
- Includes jetting for 100, 125, & 150 horsepower
- Fits Holley and Sniper EFI , or MSD Atomic intake manifolds
- This wet kit provides exceptionally smooth power delivery
- Single 90mm ╜ inch thick black plate between the throttle body and manifold
- Bottle is made from 6061-T6 Aluminum
- Supports up to 250 RWHP (jets purchased separately)
- Includes a 10 lb. black nitrous bottle with brackets
Energy Suspension – SuspSbfrBshngKt (Part No.3.4169G)
from
$411.99
SuspSbfrBshngKt
Edelbrock – Performer Intake Manifold for 1985-95 GM 90 Deg V6 (3.8L & 4.3L) (Part No.2111)
from
$376.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- Produces at Least 18 More Horsepower
- Best Matched with Edelbrock 500cfm Carburetor
Energy Suspension – DiffrlBushing (Part No.3.1153R)
from
$60.99
DiffrlBushing
aFe POWER – Momentum GT Cold Air Intake: Gain up to 24 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-74212)
from
$409.99
A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the auxiliary air inlet. (US PAT 9440175) For Filter-to-Housing Interface. This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum crankcase fitting provided for easy installation. A high quality CAD air scoop guides cool ambient air to the performance air filter. This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cylindrical filter has a large oval (6-3/4″ x 4-3/4″) flange and is 9″ tall inverted top Pro 5R filter media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation. This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
Product Features:
See More
Product Features:
- Outflows Factory Intake By 26%
- Built In Sight Window For Easy Inspection w/out Disassembly
- Scoop Snaps In To Airbox
- Hassle Free Installation
K&N – Cold Air Intake: Adds Up To 6 Horsepower, With Washable Air Filter (Part No.63-3105)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
Flowmaster Inc. – 80 Series Muffler, 2.5in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42583)
from
$179.99
The 80 series is a cross-flow design for applications where the muffler is mounted transversely behind the rear end. Delivering an aggressive muscle car sound both inside and outside the vehicle, this is an excellent replacement for Camaros & Firebirds with transverse mufflers. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Dynomax – Ultra Flo Exhaust Muffler: Direct Fit, Stainless Steel, 14" L, 2.5" In, 4" Out, Oval (Part No.17580)
from
$281.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Warranty and limited Performance & Sound Guarantee.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
K&N – Cold Air Intake: Adds Up To 11 Horsepower, With Washable Air Filter (Part No.63-3078)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 13 Horsepower, With Washable Air Filter (Part No.69-4520TP)
from
$419.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2002)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- 1-Year Limited Warranty
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-7003)
from
$13.99
K&N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter’s construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards. They are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer’s recommended service intervals.
Product Features:
See More
Product Features:
- High performance design for outstanding filtration
- High-efficiency media with uniform pleats
- Allows for high oil flow rates
- Ideal for high-end synthetic motor oil
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1017)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N’s Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- Limited Warranty
Product Features:
Hooker Headers – Super Competition Cat-Back System (Part No.16820HKR)
from
$614.99
Super Competition Cat-Back System Black Finish Mufflers with Aluminized Tubing
Product Features:
See More
Product Features:
- Exit At Stock Locations
- Mandrel Bent Not Press Bent
- Mandrel Bent Not Press Bent
- Maximum Flow
- Uses Existing Stock Hangers
- Large Diameter 16 Ga. Aluminum Tubing
- Low Back Pressure and Long Life
- Easy Installation
Flowmaster Inc. – Axle-back System 409S – Dual Rear Exit – Outlaw – Aggressive Sound (Part No.817504)
from
$819.99
Our race-oriented Outlaw systems are designed to replace original rear mounted mufflers located behind the rear axle using factory style connections. With easy fit in mind, these systems are mandrel bent for maximum performance and include specially selected mufflers. Outlaw systems deliverance-level, ultra aggressive interior and exterior tone and are suited to the enthusiast who wants the most aggressive components they can purchase. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Does not fit models with dual mode exhaust option.
See More
Flowmaster Inc. – Header-back System 409S – Dual Rear Exit – American Thunder- Moderate/Aggressive (Part No.817139)
from
$1025.99
For the person looking for a complete Header-back dual exhaust system with an aggressive tone. With easy fit in mind, Flowmaster’s America Thunder system for GM F-Body cars includes specially-selected Super 44 mufflers to make your Camaro or Firebird come alive. This Header-back dual exhaust system uses 2.50 in. 409S stainless steel tubing (Backed by our 10-year warranty!) and a durable H-pipe design that delivers improved throttle response, power and mileage. American Thunder systems deliver a moderate to aggressive interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.
See More
Upgrade your 2010 Chevrolet Camaro with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2010 Chevrolet Camaro, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your Camaro functioning at its best. At Advance Auto Parts, we offer a wide selection of 56 Performance and Racing Products for the 2010 Chevrolet Camaro, designed to meet your needs without breaking the bank.
From
Performance Oil Filter
replacements to
Performance Air Intake Kits
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2010 Chevrolet Camaro at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $13.99 to $1,870.00, with
an average price of $441.60.
Our 56 Performance and Racing Products in stock come from 16 trusted brands, so you’re sure to find the right part for your 2010 Chevrolet Camaro without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 Chevrolet Camaro, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N, Flowmaster Inc., Spectre, and more.
K&N Performance and Racing Products
start at just $17.99 and boast an impressive 4.8 stars average rating from customers.
Flowmaster Inc. and Spectre also bring quality to the table, with Performance and Racing Products available starting at $139.99, and at an average 4.4 stars rating.
With 400 customer reviews and counting, our 2010 Chevrolet Camaro Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2010 Chevrolet Camaro is always ready to roll. We’re committed to providing you with everything you need to keep your Camaro in top shape, all in one place.
Start shopping confidently below for your 2010 Chevrolet Camaro!
Best-Selling Performance Oil Filters for 2010 Chevrolet Camaros
Enhance the driving experience in your Chevrolet with 2 quality Performance Oil Filter components, starting at $13.99.
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1017)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N’s Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- Limited Warranty
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-7003)
from
$13.99
K&N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter’s construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards. They are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer’s recommended service intervals.
Product Features:
See More
Product Features:
- High performance design for outstanding filtration
- High-efficiency media with uniform pleats
- Allows for high oil flow rates
- Ideal for high-end synthetic motor oil
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Most Popular 2010 Chevrolet Camaro Performance Air Intake Kits
Customize your Chevrolet with 9 Performance Air Intake Kits products
like Engine Cold Air Intakes and
Performance Air Intake Kits, all
priced under $556.99.
K&N – Cold Air Intake: Adds Up To 18 Horsepower, With Washable Air Filter (Part No.69-4519TP)
from
$419.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 18 Horsepower, With Washable Air Filter (Part No.71-4519)
from
$419.99
Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Powder-coated aluminum intake tube paired with dry synthetic air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 50,000 miles under normal highway driving conditions
- Typical installation can be completed in 90 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 13 Horsepower, With Washable Air Filter (Part No.69-4520TP)
from
$419.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
Spectre – Spectre Air Intake Kit (Part No.9909)
from
$209.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
- Product might not be available in all states due to local laws.
K&N – Cold Air Intake: Adds Up To 19 Horsepower, With Washable Air Filter (Part No.63-3074)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
Spectre – Spectre Air Intake Kit (Part No.9908)
from
$209.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with couplers, stainless steel clamps, and all necessary hardware for an OE fit and finish. The stock MAF sensor and vent hose mounts on the intake tube.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
- Product might not be available in all states due to local laws.
Edelbrock – Competition Air Intake Kit #15988 For 10-14 Camaro SS W/OE MAF Sensor (Part No.15988)
from
$556.99
Edelbrock Part #15988 Edelbrock Competition Air Intake kit provides the increased airflow needed for 2010-14 Camaro SS racing applications. It includes a 9in. long reusable open element filter, plastic shroud and all necessary hardware for installation. T
Product Features:
See More
Product Features:
- Red Filter Color
- Cotton Gauze Filter Material
- Cone Filter Shape
- 10 Overall Length
- 95mm Housing Diameter
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 10 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-11762)
from
$399.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- Uses Pro 5R Filter For Maximum Air Flow
- Rotomolded Plastic Tube For Maximum Air Flow
- 35% cfm Flow Gain
- Improved Throttle Response
Spectre – Air Intake Kit (Part No.99080K)
from
$209.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a black washable, reusable low restriction Spectre air filter, black powder coated aluminum intake tube and a black powder coated steel heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with the necessary rubber boots, velocity stack, stainless steel clamps and all necessary hardware for an OE fit and finish.
See More
Top Picks for 2010 Chevrolet Camaro Performance Steering Products
Upgrade Chevrolet Camaros with top-quality Performance Steering Products parts, including 2 OEM and aftermarket selections for your 2010 model.
Energy Suspension – SwyBarBshKt (Part No.3.5219G)
from
$72.99
SwyBarBshKt
Energy Suspension – SwyBarBshKt (Part No.3.5218R)
from
$24.79
SwyBarBshKt
In-Demand Performance Exhaust Products for 2010 Chevrolet Camaros
Select from 12 premium Performance Exhaust Products parts for your 2010 Chevrolet Camaro, with prices ranging from $48.49 to $972.99.
Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842548)
from
$139.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.8042543)
from
$135.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – DBX Muffler, 2.25in Center Inlet 2.25in Center Outlet, 14in long, Non-Reversible, Moderate Sound (Part No.12414310)
from
$245.99
dBX series mufflers – this Laminar Flow internal configuration muffler features the revolutionary HP core design delivering excellent sound control for a wide variety of engine types where vehicle under-chassis space is limited. Utilizing cool shell technology to minimize radiant heat from the muffler body, they are perfect for sport compact imports as well as muscle cars and other performance applications. Constructed with 409S stainless steel internal components and wrapped with a proprietary insulation material and finally a polishable 304 stainless steel casing, these mufflers are as attractive as they are functional delivering a moderate to aggressive tone.
See More
Flowmaster Inc. – Header 409S – Block Hugger – 3.00 in. Stock Flange Outlet – Pair (Part No.814121)
from
$972.99
Flowmaster’s Scavenger Series Elite shorty headers are designed to replace the restrictive factory manifolds. These high quality headers are manufactured from stainless steel and are ceramic coated for maximum durability. They feature 1-3/4 in. primary tubes, 3/8 in. thick laser cut flanges and factory collector connections, ensuring a direct-fit, leak free installation. Like all Flowmaster products, the benefits include improved throttle response, power and engine efficiency. Designed for an easy fit, these headers include gaskets and necessary hardware for easy installation. Note: this product has been granted a California Air Resources Board (CARB) exemption, an E.O. number, or is a direct or consolidated replacement part. It is 50-state legal, per the application guide.
Product Features:
See More
Product Features:
- Stainless steel construction
- 50 state emissions certified
- Dyno tuned for maximum performance
- High temperature ceramic coated
- 0.375 thick laser cut flanges
Flowmaster Inc. – Axle-back System 409S – Dual Rear Exit – Outlaw – Aggressive Sound (Part No.817504)
from
$819.99
Our race-oriented Outlaw systems are designed to replace original rear mounted mufflers located behind the rear axle using factory style connections. With easy fit in mind, these systems are mandrel bent for maximum performance and include specially selected mufflers. Outlaw systems deliverance-level, ultra aggressive interior and exterior tone and are suited to the enthusiast who wants the most aggressive components they can purchase. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Does not fit models with dual mode exhaust option.
See More
Hooker Headers – LS Cast Iron Exhaust Manifold (Part No.8501HKR)
from
$491.99
LS Cast Iron Exhaust Manifold
Dynomax – Exhaust Pipe (Part No.54714)
from
$344.99
Made from quality materials for durability, DynoMax direct fit X-pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from stainless steel for durability and long life
- BUILD IT YOURSELF : Design and custom fabricate your own exhaust system with DynoMax pipe
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Dynomax – Ultra Flo Exhaust Muffler: Direct Fit, Stainless Steel, 14" L, 2.5" In, 4" Out, Oval (Part No.17580)
from
$281.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Warranty and limited Performance & Sound Guarantee.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
Dynomax – Exhaust Intermediate Pipe (Part No.54710)
from
$103.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from stainless steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Dynomax – Exhaust Intermediate Pipe (Part No.51068)
from
$52.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from stainless steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Dynomax – Universal Catalytic Converter: Fabrication Needed, 3 " In, 3 "Ou, EPA Compliance (Part No.51069)
from
$49.49
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from stainless steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Dynomax – Direct Fit Manifold Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.51070)
from
$48.49
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from stainless steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Most Sold 2010 Chevrolet Camaro Performance Engines
Explore our best-selling Chevrolet parts for the 2010 Camaro among 17 OEM and aftermarket options starting from $18.99.
Competition Cams – XFI XE-R 224/230 Hydraulic Roller Cam (Part No.54-444-11)
from
$541.99
HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
- 273/279 Advertised Duration, 224/230 Duration @ .050″, .581″/.588″ Lift, 114 Lobe Separation
- Use Beehive Valve Spring part No. 26918-16 with this camshaft
Competition Cams – XFI XE-R 232/234 Hydraulic Roller Cam (Part No.54-446-11)
from
$541.99
HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
- 281/283 Advertised Duration, 232/234 Duration @ .050″, .595″/.598″ Lift, 112 Lobe Separation
- Use Dual Valve Spring part No. 26925-16 with this camshaft
Competition Cams – XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-412-11)
from
$1870.00
XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV
Competition Cams – XFI RPM HI-LIFT 222/224 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-426-11)
from
$1867.00
XFI RPM HI-LIFT 222/224 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV
Competition Cams – XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-408-11)
from
$1195.00
XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV
Competition Cams – XFI RPM 216/220 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-414-11)
from
$1195.00
XFI RPM 216/220 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV
Competition Cams – ENGINE VALVE LIFTER (Part No.15850-16)
from
$868.99
ENGINE VALVE LIFTER
Competition Cams – Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-600-11)
from
$805.99
Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV
Competition Cams – LSR Rectangular Port 227/243 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-454-11)
from
$805.99
LSR Rectangular Port 227/243 Hydraulic Roller Cam for GM LS GEN III/IV
Holley – LS Carbureted Manifold – 2×4 Dual Plane GM LS1/LS2/LS6 (Part No.300-120)
from
$645.99
Product Features:
See More
- The Holley GM LS1/LS2/LS6 2x4V dual-plane was designed in the tradition of the great dual Holley 4160 induction systems that competed on drag strips, in Trans-Am and at Lemans in the 1960’s.
- The dual-plane equal-distribution layout produces great mid-range torque without compromising top end power.
- Carbureted and EFI versions available
- Power band from 1500-7000 rpm
- Appropriate for any street/performance, muscle car, or street rod enthusiast
- Cast aluminum construction
- Intended for use on all GM LS Gen III engines equipped with LS1/LS2 style cathedral port cylinder heads
- Carb Flange Center-To-Center: 8-5/8″
Edelbrock – Water Pump for GM LS Victor Pro (Clockwise Rotation) (Part No.8895)
from
$551.99
Edelbrock #8895 Water Pump GM gen III ls1 & gen iv ls engines insert style ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “supe
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.750 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 6.00 in. Block To Hub Height
- Natural Finish
Competition Cams – XFI RPM 212/218 Hydraulic Roller Cam (Part No.54-412-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – XFI RPM HI-LIFT 212/218 Hydraulic Roller Cam (Part No.54-424-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – XFI XE-R 238/240 Hydraulic Roller Cam (Part No.54-448-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – XFI RPM 216/220 Hydraulic Roller Cam (Part No.54-414-11)
from
$541.99
HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.
- 269/273 Advertised Duration, 216/220 Duration @ .050″, .525″/.532″ Lift, 114 Lobe Separation
- Use Beehive Valve Spring part No. 26915-16 with this camshaft
Competition Cams – ENGINE ROCKER ARM (Part No.1676-1)
from
$62.99
ENGINE ROCKER ARM
Competition Cams – Camshaft Lock Plate w/ Bolts for GM LS GEN III/IV with 3 Bolt Camshaft (Part No.5461)
from
$18.99
Camshaft Lock Plate w/ Bolts for GM LS GEN III/IV with 3 Bolt Camshaft
Top-Rated Performance and Racing Products Brands For Your 2010 Chevrolet Camaro
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2010 Chevrolet Camaros. Below you’ll find some of our best rated Performance and Racing Products from K&N, Flowmaster Inc., and Spectre, and more. Performance and Racing Products from these brands that fit a 2010 Camaro start at just $17.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 2010 Chevrolet Camaro Performance and Racing Products
When it comes to maintaining or upgrading your 2010 Chevrolet Camaro, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2010 Chevrolet Camaro. With over 3 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99, with an average price of just $285.99. Plus, with over 157 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$17.99
(133)
Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine
“Joe Biden needs to be in an old age home
Epstein didn’t kill himself.”
from
$419.99
(18)
Cold Air Intake: Adds Up To 18 Horsepower, With Washable Air Filter
“Excellent!!!”
from
$419.99
(6)
Cold Air Intake: Adds Up To 18 Horsepower, With Washable Air Filter
“I did a lot of research on CAI systems and I have to tell you this one is a sleeper, performance way better than I expected. I ended up deciding on th”
Popular Flowmaster Inc. 2010 Chevrolet Camaro Performance and Racing Products
Flowmaster Inc. auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2010 Chevrolet Camaro owner should feel confident when installing genuine Flowmaster Inc. parts in their vehicle. To ensure the best fit and performance for your 2010 Camaro, Advance Auto Parts carries a full inventory of 1 Flowmaster Inc. Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Flowmaster Inc. Performance and Racing Products range up to $139.99, plus, with more than 1 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$139.99
(1)
Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound
“awesome sound!”
FAQs for 2010 Chevrolet Camaro Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2010 Chevrolet Camaros?
Out of 56 Performance and Racing Products that fit 2010 Chevrolet Camaros, the following parts are the top sellers:
- Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device (11051146) – $469.99
- Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges (11907375) – $456.99
- Speedometer Calibrator Color: Recalibrate your speedometer to account for changes to tire size (12452493) – $239.99
What’s the price range for 2010 Chevrolet Camaro Performance and Racing Products?
Performance and Racing Product prices for the 2010 Chevrolet Camaro start at $13.99 and go up to $1,870.00 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2010 Chevrolet Camaro?
The average price for Performance and Racing Products for the 2010 Chevrolet Camaro is $441.60. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet Camaro model years?
What are the cheapest Performance and Racing Products for my 2010 Chevrolet Camaro?
The cheapest 2010 Chevrolet Camaro Performance and Racing Products we carry in stock are:
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (16670017) – $13.99
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (16400033) – $17.99
- Camshaft Lock Plate w/ Bolts for GM LS GEN III/IV with 3 Bolt Camshaft (50288119) – $18.99
- SwyBarBshKt (10600254) – $24.79
- Direct Fit Manifold Catalytic Converter: No Fabrication Needed, EPA Compliance (10044211) – $48.49
What are the top-rated Performance and Racing Products that fit the 2010 Chevrolet Camaro?
Out of 400 reviews by customers, our 2010 Chevrolet Camaro Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2010 Chevrolet Camaro and their top-rated products:
- Performance Air Intake Kits
- Spectre Air Intake Kit (10160193) – $209.99
- Cold Air Intake: Adds Up To 18 Horsepower, With Washable Air Filter (10173265) – $419.99
- Cold Air Intake: Adds Up To 18 Horsepower, With Washable Air Filter (10659032) – $419.99
- Programmers
- Spectre Air Intake Kit (10160193) – $209.99
- Cold Air Intake: Adds Up To 18 Horsepower, With Washable Air Filter (10173265) – $419.99
- Cold Air Intake: Adds Up To 18 Horsepower, With Washable Air Filter (10659032) – $419.99
- Performance Oil Filters
- Spectre Air Intake Kit (10160193) – $209.99
- Cold Air Intake: Adds Up To 18 Horsepower, With Washable Air Filter (10173265) – $419.99
- Cold Air Intake: Adds Up To 18 Horsepower, With Washable Air Filter (10659032) – $419.99
What types of Performance and Racing Products do you sell for my 2010 Chevrolet Camaro?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 2010 Chevrolet Camaro:
Can I get help with 2010 Chevrolet Camaro Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.
What is your return policy for Chevrolet Camaro Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Chevrolet Camaro Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
