2010 Cadillac Escalade ESV Ignition and Tune-Up Products

Essential 2010 Cadillac Escalade ESV Ignition and Tune-Up Products

ACDelco – Specific FitSpark Plug Wire (Part No.349V)

Specific FitSpark Plug Wire

from

$19.99
ACDelco GM Original Equipment Spark Plug Wires consist of a single wire, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Durable to help transfer high voltage pulses without damage
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – Spark Plug Wire (Part No.356F)

Spark Plug Wire

from

$28.99
ACDelco GM Original Equipment Spark Plug Wires consist of a single wire, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Durable to help transfer high voltage pulses without damage
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Dorman – Cabin Air Filter Carbon Kit (Part No.259-201)

Cabin Air Filter Carbon Kit

from

$66.99
This cabin air filter retrofit kit is designed to match the original filter that is required to restore proper cabin airflow on specified vehicles. Made of quality materials, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this cabin air filter retrofit kit is designed to match the original filter required to restore proper cabin airflow on specified vehicles
  • Ideal solution – this kit is a reliable replacement for the original filter that is clogged or has failed
  • Durable construction – this kit is made from quality materials to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Cabin Air Filter Standard Kit (Part No.259-200)

Cabin Air Filter Standard Kit

from

$68.99
This cabin air filter retrofit kit is designed to match the original filter that is required to restore proper cabin airflow on specified vehicles. Made of quality materials, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this cabin air filter retrofit kit is designed to match the original filter required to restore proper cabin airflow on specified vehicles
  • Ideal solution – this kit is a reliable replacement for the original filter that is clogged or has failed
  • Durable construction – this kit is made from quality materials to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

NTK – Ignition Knock (Detonation) Sensor (Part No.ID0300)

Ignition Knock (Detonation) Sensor

from

$22.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
  • NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
  • The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3654)

Ignition Knock (Detonation) Sensor

from

$57.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

DENSO – Spark Plug Wire Set: Aluminum Steel Core, 8 Wire Set (Part No.671-8063)

Spark Plug Wire Set: Aluminum Steel Core, 8 Wire Set

from

$95.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

ACDelco – Spark Plug Wire Set (Part No.748RR)

Spark Plug Wire Set

from

$145.99
ACDelco GM Original Equipment Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Durable to help transfer high voltage pulses without damage
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

GM Genuine Parts – Fuel Injection Fuel Rail Bolt (Part No.12554211)

Fuel Injection Fuel Rail Bolt

from

$9.99
GM Genuine Parts Studs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Suncore – Shock Absorber (Part No.12S211110)

Shock Absorber

from

$39.99
Shock Absorber

Suncore – Shock Absorber (Part No.12S251400)

Shock Absorber

from

$21.99
Shock Absorber

NGK – NGK Wire Set (Part No.51430)

NGK Wire Set

from

$67.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Delphi – Ignition Wire Set (Part No.F10203329509DEL)

Ignition Wire Set

from

$97.75
Ignition Wire Set

Delphi – IGNITION COIL (Part No.GN10298)

IGNITION COIL

from

$52.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

Driveworks – Coil on Plug Coil (Part No.26427)

Coil on Plug Coil

from

$56.05
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.5245)

Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration

from

$3.49
With over 100 years of engineering expertise and over 11 billion plugs sold, Autolite continues to set the standard in spark plug technology. Designed and engineered in the USA, these spark plugs feature a copper cored center electrode for higher thermal conductivity, a specially engineered high nickel alloy center and ground electrode for extended life, and high alumina ceramic for high dielectric strength. Additionally, the leak-proof, heat-fused internal seal ensures durability, while the multi-rib insulator prevents flash-over, making these plugs a reliable choice for enhancing your vehicle’s performance.

Product Features:
  • Copper cored center electrode for higher thermal conductivity
  • Specially engineered high nickel alloy center and ground electrode for extended life
  • High alumina ceramic for high dielectric strength
  • Leak proof, heat fused internal seal for durability
  • Multi-rib insulator prevents flash-over
  • Quick Starts: The Autolite Copper Spark Plug ensures quick engine starts, enhancing your vehicle’s reliability and performance.
  • Good Fuel Economy: Designed to optimize fuel efficiency, these spark plugs help you save on fuel costs while maintaining excellent engine performance.
  • Smooth Acceleration: Experience smoother acceleration with the high-quality engineering of Autolite Copper Spark Plugs, providing a more responsive driving experience.
See More

Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.5243)

Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration

from

$2.99
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:
  • Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
  • Multi-rib insulator reduces danger of “flash-over”
  • One-piece terminal post adds strength
  • Resistor reduces radio frequency interference (RFI) and electrode erosion
See More

Carquest – Ignition Switch (Part No.CS1107)

Ignition Switch

from

$42.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Copper alloy conductors ensure superior electrical conductivity with low resistive losses
  • Our parts are 100% tested to verify both mechanical and electrical switching performance
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Dorman – Ignition Starter Switch (Part No.924-715)

Ignition Starter Switch

from

$34.49
This replacement ignition switch is a direct replacement for a damaged or worn-out original equipment switch Made of quality materials for durability, this part has been tested to ensure a proper fit.

Product Features:
  • Ideal replacement – this ignition switch matches the fit and function of the original equipment switch to restore proper operation to the ignition circuit
  • Durable construction – this ignition switch is made of quality materials to ensure reliable performance and a long service life
  • Cost-effective solution – offers original equipment performance at competitive price
  • Quality tested – this part has undergone try-on testing to ensure a quality fit
See More

NGK – NGK Wire Set (Part No.51440)

NGK Wire Set

from

$75.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

MSD Ignition – Wire Set; Black Super Conductor; LS-1 Truck Engines; 99-on (Part No.32823)

Wire Set; Black Super Conductor; LS-1 Truck Engines; 99-on

from

$109.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Bolt-on Performance
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
See More

Carquest Premium – Engine Crankshaft Position Sensor Connector (Part No.PTA1136)

Engine Crankshaft Position Sensor Connector

from

$69.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

ACDelco – Gray Multi-Purpose Pigtail (Part No.PT2655)

Gray Multi-Purpose Pigtail

from

$72.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Accel – 14-Up Lt Square Coil-Black 8 Pack (Part No.140081-8)

14-Up Lt Square Coil-Black 8 Pack

from

$449.99
2014 and up GM owners now have a more powerful ignition option for Gen V Direct Injected V8 power plants. Accel offers coils in both round and square configurations to cover everything from Corvette and Camaro to Trucks and SUV’s. Accel GM Gen V coils are right at home on stock applications and produce higher output than factory coils, making them ideal for a tuned up, high performance build. They are a direct fit replacement for stock GM Gen V coils making installation a true plug-and-play bolt on upgrade.

Product Features:
  • Direct Replacement! Bolt them on and plug them in
  • Increased output over factory coils
  • Available in black
  • Excellent Reliability
  • Exceptional Value
  • Meets or exceeds O.E. specifications
See More

MSD Ignition – Coils; Pro Power; GM L-Series Truck 99-07; 8-Pack (Part No.82868)

Coils; Pro Power; GM L-Series Truck 99-07; 8-Pack

from

$991.99
MSD ignition’s Multiple Spark Coils (MSC) will fit in place of the stock Gen-III GM coils and connect directly to the factory connec­tors. Once installed, you’ll have the power and performance of higher energy sparks, crowned with MSD’s multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mix­ture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance. There are two types of housings for the MSD coils. Check your application for the visual match.

Product Features:
  • Multiple Sparks At Idle RPM
  • Direct Bolt-In to Factory Connectors
  • Improved Spark Energy And Voltage Output
  • Patented Winding Design and Materials
See More

Accel – Coil:GM Ls2 Ls3 Ls7 8-Pack (Part No.140043-8)

Coil:GM Ls2 Ls3 Ls7 8-Pack

from

$519.99
ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.

Product Features:
  • These coils feature advanced bobbin technology.
  • Highly specialized silicone magnetic steel cores with optimized windings
  • Specialized high temperature epoxy filled housings resists shock, vibration, chemicals, and overall engine bay environment.
  • These are a direct performance bolt on upgrade.
  • The ACCEL bodies are molded in a dielectric high-strength material.
  • 8 Pack
See More

Accel – Coil:GM Ls2 Ls3 Ls7 8-Pack-Black (Part No.140043K-8)

Coil:GM Ls2 Ls3 Ls7 8-Pack-Black

from

$628.99
Now you can have ACCEL late model Supercoils in additional colors

Product Features:
  • These coils feature advanced bobbin technology.
  • Highly specialized silicone magnetic steel cores with optimized windings
  • Specialized high temperature epoxy filled housings resists shock, vibration, chemicals, and overall engine bay environment.
  • These are a direct performance bolt on upgrade.
  • The ACCEL bodies are molded in a high dielectric strength material.
See More

MSD Ignition – Coil; Street Fire; GM L-Series Truck 99-09; 8-Pack (Part No.55108)

Coil; Street Fire; GM L-Series Truck 99-09; 8-Pack

from

$409.99
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and 48,000 maximum volts. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.

Product Features:
  • Increased Spark Energy Over The Entire RPM Range Of The Engine
  • Coils Bolt In Place Of The Factory Units
  • Accepts OEM Connections For A Simpler Installation
See More

2010 Cadillac Escalade ESV Ignition and Tune-Up Products

You count on your 2010 Cadillac Escalade ESV to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 58 Ignition and Tune-Up Products ranging in price from $2.99 to $519.99, you’re sure to find everything you need for your 2010 Cadillac Escalade ESV.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 16 different brands like ACDelco, NGK, and DENSO. 2010 Cadillac Escalade ESV Ignition and Tune-Up Products start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,892 extensive product reviews on 2010 Cadillac Escalade ESV Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit with 4.6 stars and PT16TT Platinum TT Spark Plug with 4.6 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2010 Cadillac Escalade ESV below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 2010 Cadillac Escalade ESV

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2010 Cadillac Escalade ESV running right for years to come. In our inventory you’ll find brands like ACDelco, NGK, DENSO, and even more.

Popular Autolite Ignition and Tune-Up Products

You’ll find popular Autolite brand products across Spark Plugs. All are waiting to get your 2010 Cadillac Escalade ESV back on the road. Some of the top-rated Autolite products in these categories are:

FAQs for 2010 Cadillac Escalade ESV Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 2010 Cadillac Escalade ESV?

Out of 58 Ignition and Tune-Up Products for the 2010 Cadillac Escalade ESV, the most popular in our inventory are:
Iridium Spark Plug: Original Equipment Replacement
from $11.99
This product is not rated
Iridium Spark Plug: Original Equipment Replacement
Spark Plugs

What are the top-rated 2010 Cadillac Escalade ESV Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 2010 Cadillac Escalade ESV based on customer reviews/ratings are:
PT16TT Platinum TT Spark Plug
from $5.99
(90)
PT16TT Platinum TT Spark Plug
“On line”
Iridium IX Spark Plug: Single Iridium Fine Wire, TR5IX
from $11.99
(74)
Iridium IX Spark Plug: Single Iridium Fine Wire, TR5IX
“The Young Man who helped me was very helpful”