from

$49.99

Designed to provide enhanced endurance and maximum contamination exclusion while ensuring proper fit, form and function.

from

$111.10

Boost Pressure Valve

from

$28.26

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$49.99

Rein turbo oil feed pipes are manufactured with premium ContiTech OE quality hose material designed to withstand the demands of automotive turbo cooling systems. Rein turbo oil feed pipes are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in turbo cooling systems.

Product Features:

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both feed and return pipes together ensures optimal performance and safety levels.

from

$14.23

Valve Stem Seal Kit

from

$457.33

Eccentric Shaft Sens

from

$148.40

Turbo Boost Control

from

$9.49

Intake Manifold Gask

from

$2.28

Screw

from

$13.41

All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:

Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
Various designs specifically adapted to the area of application ensure excellent functionality and performance
High-performance FPM guarantees optimum leak tightness

from

$56.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL — Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR — Fel-Pro« gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro« engineers through rigorous research and development
ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro« engineers through rigorous research and development

from

$28.31

All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:

Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
Various designs specifically adapted to the area of application ensure excellent functionality and performance
High-performance FPM guarantees optimum leak tightness

from

$49.99

Rein OE quality bolts kits fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original bolts are identical to OEM. Supplied with all the necessary bolts and torque specs to ensure that the job is done right.

Product Features:

Includes all the bolts needed to complete the job.
Comes with torque specs to make sure each bolt is properly tighten
Manufactured to strict engineering standards/specifications in materials and tolerances
Aluminum bolts are torque to yield and must be replaced once they are released.

from

$195.86

Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines. Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:

Original Equipment Quality
Excellent wear resistance
Low propensity to seize
Reduction in Friction

from

$75.99

This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:

Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$3.50

Camshaft Adjuster Se

from

$163.92

Turbo Diverter Valve

from

$1.00

Turbo Oil line Gaske

from

$19.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$80.99

NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.

Product Features:

NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
The NTK VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
The NTK VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
The NTK VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
The NTK VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
The NTK VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.

from

$81.26

Timing Chain

from

$58.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$912.99

Reman. Turbocharger

from

$24.43

Rocker Arm

from

$2.84

The APA/URO Engine Cooling Fan Switch Seal is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features: