2010 BMW M3 Engine Cooling Parts

Essential 2010 BMW M3 Engine Cooling Parts

Victor Reinz – Engine Water Pump Housing O-Ring (Part No.41-10453-00)

Engine Water Pump Housing O-Ring

from

$3.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Valeo – Air Flap Actuator (Part No.R2046700055VAL)

Air Flap Actuator

from

$137.17
Air Flap Actuator

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Thermostatic Fan Control - Preset

from

$38.49
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Preset thermostatic fan control
  • 185°F preset
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Elring – Water Pump O-Ring (Part No.G3059279771ELR)

Water Pump O-Ring

from

$4.11
Water Pump O-Ring

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Carquest Premium – Radiator Cap: 30 PSI (Part No.10247)

Radiator Cap: 30 PSI

from

$23.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Original Equipment – Engine Cooling Auxiliary Thermo-Fan Switch (Part No.G5030151345OEA)

Engine Cooling Auxiliary Thermo-Fan Switch

from

$37.38
The Original Equipment Engine Cooling Thermo-Fan Switch is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

APA/URO Parts – Coolant Bleed Screw (Part No.G203275972APA)

Coolant Bleed Screw

from

$2.98
Coolant Bleed Screw

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1169)

Engine Water Pump: New, Gasket/Seals Included

from

$78.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Electric Fan - 14" Diameter

from

$99.99
Product Features:
  • Motors built and tested to quality specifications
  • 14 in. universal fit reversible fan
  • 1250 CFM
  • UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
See More

CSF – OE Quality Radiator (Part No.G1000681507CSF)

OE Quality Radiator

from

$1043.03
Plastic Tank / Aluminum Core Radiator CSF prides itself on using the most advanced technologies, machines, and experienced personnel to design, develop, and manufacture the world’s best cooling systems. With three privately owned, ISO certified manufacturing facilities that supply to local OE brands, CSF houses the industry’s best manufacturing equipment. CSF’s world class facilities manufacture the highest quality cooling system products available. Thanks to our cutting edge capabilities, we are able to produce the strongest and most complicated components with ease. CSF leads the industry in multi-fit models, which provides customers with additional application coverage, while reducing inventory. All CSF radiators undergo a rigorous testing process in our state-of-the-art testing lab. Our procedures and requirements set the bar for cooling system reliability and performance:

Product Features:
  • Individually leak tested
  • Vibration cycle tested
  • Thermal cycle tested
  • Wind tunnel tested for optimal radiator core cooling efficiency
  • Burst pressure and impulse cycle tested for strength
  • Salt spray tested for corrosion protection
  • 10 foot box “drop test” to ensure packaging protection
  • 30 point fitment inspection on critical dimensions to ensure OE fitment with no modifications necessary
See More

KAI – Radiator (Part No.RAD2627)

Radiator

from

$724.99
New Platinum Pro Radiator, 3.2 Liter L6 Engine

Product Features:
  • 3.2 Liter L6 Engine, Made Of Plastic and Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Mahle – Thermostat (Part No.G4000106568MAH)

Thermostat

from

$33.34
Intelligent control systems from MAHLE are used in millions of applications worldwide to provide needs-based precision temperature control. Simple, effective, and tried and tested millions of times over: thermostat inserts from MAHLE provide meticulous regulation of coolant circuits around the world up to approximately 20 m3/h, and ensure ideal operating temperatures in light vehicles, trucks, stationary engines, and also agricultural and construction machinery. Wax elements are at the heart of all MAHLE thermostats and thermostat inserts. These maintenance-free, durable elements have proved their worth in millions of applications. MAHLE, Manufactures a wide range of variants with actuating forces of between 30 N and 2,500 N, small or large displacements, and for a large number of regulation ranges within a temperature span of -20C to +130C.

Product Features:
  • OE quality and design
  • Maintenance-free, durable elements
See More

Motorad – Standard Thermostat: With Seal, 178 Degrees (Part No.459-180)

Standard Thermostat: With Seal, 178 Degrees

from

$62.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

APA/URO Parts – Expansion Tank Cap (Part No.G1040458021APA)

Expansion Tank Cap

from

$25.20
The APA/URO Expansion Tank Cap is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Rein – Expansion Tank Cap (Part No.G1040458021RIN)

Expansion Tank Cap

from

$36.09
The Rein Expansion Tank Cap is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

MTC – Radiator Mount (Part No.G102076019MTC)

Radiator Mount

from

$3.65
Radiator Mount

Vemo – Coolant Level Sensor (Part No.G105057972VMO)

Coolant Level Sensor

from

$34.85
Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality.
See More

Carquest Premium – Engine Coolant Level Sensor (Part No.FFA1194)

Engine Coolant Level Sensor

from

$134.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Original Equipment – Coolant Level Sensor (Part No.G1050335088OEA)

Coolant Level Sensor

from

$27.06
Coolant Level Sensor

APA/URO Parts – Radiator Mount (Part No.G1020388318APA)

Radiator Mount

from

$25.02
Radiator Mount

APA/URO Parts – Radiator Mount (Part No.G102075950APA)

Radiator Mount

from

$2.93
Radiator Mount

Vaico – Rivet, Plastic Spread Rivet (Part No.Q2001400703VCO)

Rivet, Plastic Spread Rivet

from

$1.61
Rivet, Plastic Spread Rivet

2010 BMW M3 Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 2010 BMW M3. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 40 different Engine Cooling Parts in our inventory ranging from $1.61 to $1,043.03. That means you can find the exact parts or products you need to keep that 2010 BMW M3 running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 20 different brands to make sure you have plenty of trusted parts to choose from for your 2010 BMW M3. Permatex, Imperial, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 2010 BMW M3, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 397 reviews in this category, some of the top rated parts include Electric Fan – 14" Diameter with 3.5 stars and Thermostatic Fan Control – Preset with 3.0 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2010 BMW M3 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 2010 BMW M3 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2010 BMW M3 demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your M3 the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

FAQs for 2010 BMW M3 Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2010 BMW M3?

Out of 40 Engine Cooling Parts for the 2010 BMW M3, the most popular in our inventory are:
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers
Adjustable Thermostatic Fan Control
from $55.99
(33)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers
Radiator
from $285.99
(5)
Radiator
Radiators

What are the top-rated 2010 BMW M3 Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 2010 BMW M3 based on customer reviews/ratings are:
Electric Fan - 14" Diameter
from $99.99
(14)
Electric Fan – 14" Diameter
“Fit fine. Easy install. Cools the car.”
Thermostatic Fan Control - Preset
from $38.49
(8)
Thermostatic Fan Control – Preset
“I’ve been using this kit for several years on my off road truck. It’s hooked up to a powerful flex-a-lite fan and handles the load with ease. I have”
Coolant Air Bleeder Screw
from $4.99
(5)
Coolant Air Bleeder Screw
“Fixed the problem in 5mins….no more coolant leaking from my bleeder screw.”