2009 Mazda Tribute Cooling and Climate Controls

Essential 2009 Mazda Tribute Cooling and Climate Controls

Motorcraft – Thermostat O-Ring (Part No.G4030195862MTR)

Thermostat O-Ring

from

$3.89
Thermostat O-Ring

Carquest Premium – AC Pressure Sensor (Part No.ABA1012)

AC Pressure Sensor

from

$99.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-241)

HVAC Blend Door Actuator: 1 Piece

from

$37.99
This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:
  • Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
  • Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
  • Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
  • Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience
See More

Carquest Premium – A/C Discharge and Suction Line Hose Assembly (Part No.T56050)

A/C Discharge and Suction Line Hose Assembly

from

$132.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Factory Air – Harness Connector (Part No.37235)

Harness Connector

from

$15.79
OE style connectors; Molded plastic construction; Quality contacts ensure proper conductivity; Universal applications
See More

Carquest Premium – Ignition Knock (Detonation) Sensor Connector (Part No.PTA2725)

Ignition Knock (Detonation) Sensor Connector

from

$41.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12033)

Radiator Cap Tester Adapter

from

$93.99
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Factory Air – System Mounted Low Cut-Out Pressure Switch (Part No.20056)

System Mounted Low Cut-Out Pressure Switch

from

$27.49
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

Dorman – Pressurized Coolant Reservoir: Clear, Plastic, Original Equipment Replacement (Part No.603-205)

Pressurized Coolant Reservoir: Clear, Plastic, Original Equipment Replacement

from

$83.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:
  • Direct replacement – this engine coolant reservoir matches the fit and function of the original part
  • Ideal solution – engineered for a seamless installation
  • Durable construction – manufactured from quality materials to withstand underhood heat and vibration
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0106)

Engine Coolant Temperature Sensor

from

$28.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Felpro – Multi-Purpose O-Ring (Part No.35489)

Multi-Purpose O-Ring

from

$9.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Carquest Premium – A/C New; w/ Clutch; w/ DKS17D Compressor (Part No.T9208910)

A/C New; w/ Clutch; w/ DKS17D Compressor

from

$411.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.813067)

Radiator: With Transmission Oil Cooler

from

$142.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

Carquest Premium – New Auxiliary Water Pump (Part No.T1373)

New Auxiliary Water Pump

from

$171.99
This new pump is 100% tested to ensure the highest quality. Each unit is built to meet or exceed all OE specifications and is validated for fit, form, and function. Application specific design to ensure a perfect fit and correct operation for unsurpassed quality.

Product Features:
  • All components necessary for installation are supplied with pump
  • Plastic housing
  • Follow all enclosed instructions to maximize pump life and validate warranty
  • Specialized for vehicles using supplemented cooling for the engine or components
See More

Santech – A/C Pressure Switch (Part No.R1054299641SII)

A/C Pressure Switch

from

$48.88
A/C Pressure Switch

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T56619)

A/C Discharge Line Hose Assembly

from

$75.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – Blower Motor: Without Wheel (Part No.35016)

Blower Motor: Without Wheel

from

$67.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Carquest Premium – HVAC Blower Motor Resistor Connector (Part No.PTC1119)

HVAC Blower Motor Resistor Connector

from

$66.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Dorman – Radiator Drain Petcocks (Part No.G1005831567DOR)

Radiator Drain Petcocks

from

$5.38
Dorman offers a variety of Radiator Drain Petcocks for a range of applications. The high-quality design ensures effective draining of the cooling system.

Product Features:
  • Available in several styles, including standard, screw-in, and push-in with captive thread
  • Direct replacement Radiator Drain Petcocks available (where applicable) to ensure a proper fit
  • Durably engineered for a long service life
  • Easy to use, no need to disconnect any of the radiator hoses
See More

Carquest Premium – A/C Filter Drier w/ Pad Mount (Part No.T83265)

A/C Filter Drier w/ Pad Mount

from

$53.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Koyo Cooling – A/C Condenser (Part No.R1030427209KCS)

A/C Condenser

from

$151.88
A/C Condenser

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26823)

O-Ring & Gasket A/C System Seal Kit

from

$58.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R134a and R12 refrigerants
  • Application specific
  • SUV and rear air applications
See More

Vemo – Blower Motor Resistor (Part No.R2032300864VMO)

Blower Motor Resistor

from

$54.77
The Vemo Blower Motor Resistor is manufactured to meet or exceed the OE specifications for performance, fit and function.

Product Features:
  • Excellent electrical and thermal performance
  • Direct OE replacement
  • Built to strict quality control standards
  • 100% tested
See More

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Electric Fan - 12" Diameter

from

$94.99
Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Rapid-Cool® Thin-Line electric fans
  • 12″ Diameter
  • 800 CFM
  • Use as a pusher or puller fan
See More

Dorman – Engine Coolant Water Outlet (Part No.902-231)

Engine Coolant Water Outlet

from

$38.49
This replacement engine coolant water outlet is engineered to match the fit and durability of the stock engine coolant water outlet on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant water outlet directly replaces the original water outlet on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement water outlets
See More

Factory Air – System Mounted Pressure Transducer (Part No.20990)

System Mounted Pressure Transducer

from

$102.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

Felpro – Engine Water Pump Gasket (Part No.35973)

Engine Water Pump Gasket

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Motorcraft – Thermostat Bypass Pipe (Part No.G4006673604MTR)

Thermostat Bypass Pipe

from

$137.70
The Motorcraft Thermostat Bypass Pipe is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • OES replacement part for your vehicle’s original factory component
  • Offering the quality, reliability, and durability of OES
  • Manufactured to OES specification for fit, form, and function
See More

2009 Mazda Tribute Cooling and Climate Controls

You count on your 2009 Mazda Tribute to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 104 Cooling and Climate Controls ranging in price from $2.99 to $411.99, you’re sure to find everything you need for your 2009 Mazda Tribute.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 18 different brands like Permatex, Carquest Premium, and Imperial. 2009 Mazda Tribute Cooling and Climate Controls start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 2,119 extensive product reviews on 2009 Mazda Tribute Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Electric Fan – 12" Diameter with 3.5 stars and Adjustable Thermostatic Fan Control with 4.8 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2009 Mazda Tribute below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 2009 Mazda Tribute

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2009 Mazda Tribute running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Imperial, and even more.

Popular Carquest Standard Cooling and Climate Controls

You’ll find popular Carquest Standard brand products across Air Conditioning Parts. All are waiting to get your 2009 Mazda Tribute back on the road. Some of the top-rated Carquest Standard products in these categories are:
Reman York-Diesel Kiki-Zexel-Seltec DKS17DS Compressor w/ Clutch
from $263.99
(2)
Reman York-Diesel Kiki-Zexel-Seltec DKS17DS Compressor w/ Clutch
AC Compressor Without Clutch

Top-Rated Permatex Cooling and Climate Controls


If Permatex are what you’re looking for, our inventory holds plenty. We stock Permatex brand Cooling and Climate Controls for your 2009 Mazda Tribute, and some of our most reviewed Permatex parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets

FAQs for 2009 Mazda Tribute Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 2009 Mazda Tribute?

Out of 104 Cooling and Climate Controls for the 2009 Mazda Tribute, the most popular in our inventory are:
Multi-Purpose O-Ring
from $9.99
(110)
Multi-Purpose O-Ring
Engine Coolant Pipe O-Rings
Engine Water Pump: New, Gasket/Seals Included
from $56.99
(41)
Engine Water Pump: New, Gasket/Seals Included
Water Pumps
HVAC Blower Motor Resistor
from $32.49
This product is not rated
HVAC Blower Motor Resistor
Blower Motor Resistors

What are the top-rated 2009 Mazda Tribute Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 2009 Mazda Tribute based on customer reviews/ratings are:
Electric Fan - 12" Diameter
from $94.99
(38)
Electric Fan – 12" Diameter
“good”
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
“Advance kicks butt”
Electric Fan 16" Diameter
from $92.99
(34)
Electric Fan 16" Diameter
“Awesome”