2009 Mazda 6 Engine Cooling Parts

Essential 2009 Mazda 6 Engine Cooling Parts

Carquest Premium – Engine Cooling Fan Motor Relay (Part No.RAC2648)

Engine Cooling Fan Motor Relay

from

$138.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Motorcraft – Thermostat O-Ring (Part No.G4030195862MTR)

Thermostat O-Ring

from

$4.76
Thermostat O-Ring

Sankei Switches – Sankei Switches Radiator Cap (Part No.G1010324668SAK)

Sankei Switches Radiator Cap

from

$12.85
The Sankei Switches radiator cap range has been developed to operate within original equipment manufacturer’s specifications. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.

Product Features:
  • Meets Original Equipment specifications.
  • Made from premium materials.
  • Designed to function on open cooling systems and overflow reservoir type systems.
See More

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.114)

Trimline Straight Blade Electric Fan

from

$125.99
Trimline Straight Blade Electric Fan

Felpro – THERMOSTAT GASKET (Part No.35776)

THERMOSTAT GASKET

from

$11.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Standard Thermostat: 192 Degrees (Part No.13789)

Standard Thermostat: 192 Degrees

from

$7.79
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Felpro – Engine Coolant Outlet Gasket (Part No.35905)

Engine Coolant Outlet Gasket

from

$11.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Felpro – Engine Water Pump Gasket (Part No.35932)

Engine Water Pump Gasket

from

$11.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1230)

Engine Water Pump: New, Gasket/Seals Included

from

$56.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

Motorad – Integrated Thermostat Housing: With Seal, 180 Degrees (Part No.512-185)

Integrated Thermostat Housing: With Seal, 180 Degrees

from

$45.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Felpro – Multi-Purpose O-Ring (Part No.35772)

Multi-Purpose O-Ring

from

$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Adjustable Thermostatic Fan Control

from

$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160-210°F push-in probe
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

KAI – New CAPA Certified Premium Replacement Radiator Support (Part No.MA1225146PP)

New CAPA Certified Premium Replacement Radiator Support

from

$119.99
As the Leading Value-Added Global Distributor of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles While Offering Our Customers the Most Comprehensive and Cost Effective Part Solutions, We Are Supplying a New CAPA Certified Premium Replacement Radiator Support, Models Without Radar Cruise and Smart City Brake System, 2017-2018 Japan Built Mazda 3 Models. It is Designed to Replace Your Existing Radiator Support. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • Without Radar Cruise And Smart City Brake System, 2017-2018 Japan Built Mazda 3 Models, Made Of Polypropelene & Glass fiber
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0159)

Engine Coolant Temperature Sensor

from

$57.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Autotecnica – Coolant Outlet Flang (Part No.G1055559642ANA)

Coolant Outlet Flang

from

$81.78
Coolant Outlet Flang

Vemo – Engine Coolant Temperature Sensor (Part No.C6020197036VMO)

Engine Coolant Temperature Sensor

from

$19.50
The Vemo Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Electric Fan - 14" Diameter

from

$99.99
Product Features:
  • Motors built and tested to quality specifications
  • 14 in. universal fit reversible fan
  • 1250 CFM
  • UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432679)

Radiator: With Transmission Oil Cooler

from

$197.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
See More

KAI – Radiator (Part No.RAD13053)

Radiator

from

$162.99
New Platinum Pro Radiator, 2.3 Liter Engine, Without Turbo, Automatic Transmission

Product Features:
  • 2.3 Liter Engine, Without Turbo, Automatic Transmission, Made Of Plastic and Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Ishino – Water Pipe O-Ring (Part No.G2026244351ISH)

Water Pipe O-Ring

from

$1.71
Water Pipe O-Ring

MAHLE Original – Water Outlet Gasket (Part No.C32197)

Water Outlet Gasket

from

$5.79
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Dorman – Bumper Retainer Head Dia. 0.69 In. Shank Long 0.5 In. Hole Dia. 0.33 In. (Part No.963-557)

Bumper Retainer Head Dia. 0.69 In. Shank Long 0.5 In. Hole Dia. 0.33 In.

from

$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Felpro – Engine Coolant Outlet Gasket (Part No.35906)

Engine Coolant Outlet Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

2009 Mazda 6 Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 2009 Mazda 6. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 53 different Engine Cooling Parts in our inventory ranging from $1.99 to $459.99. That means you can find the exact parts or products you need to keep that 2009 Mazda 6 running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 19 different brands to make sure you have plenty of trusted parts to choose from for your 2009 Mazda 6. Permatex, Carquest Premium, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 2009 Mazda 6, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,094 reviews in this category, some of the top rated parts include Electric Fan – 12" Diameter with 3.5 stars and Adjustable Thermostatic Fan Control with 4.8 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2009 Mazda 6 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 2009 Mazda 6 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2009 Mazda 6 demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your 6 the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular Dorman Engine Cooling Parts

We carry Dorman parts in our stock across Water Outlets categories, plus more. For a 2009 Mazda 6, our most popular Dorman Engine Cooling Parts include:
Engine Coolant Water Outlet
from $80.99
(3)
Engine Coolant Water Outlet
Water Outlets

FAQs for 2009 Mazda 6 Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2009 Mazda 6?

Out of 53 Engine Cooling Parts for the 2009 Mazda 6, the most popular in our inventory are:
Multi-Purpose O-Ring
from $9.99
(110)
Multi-Purpose O-Ring
Thermostat Housing O-Rings
Engine Water Pump: New, Gasket/Seals Included
from $56.99
(41)
Engine Water Pump: New, Gasket/Seals Included
Water Pumps
Standard Thermostat: 180 Degrees
from $10.99
(31)
Standard Thermostat: 180 Degrees
Thermostats

What are the top-rated 2009 Mazda 6 Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 2009 Mazda 6 based on customer reviews/ratings are:
Electric Fan - 12" Diameter
from $94.99
(38)
Electric Fan – 12" Diameter
“good”
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
“Advance kicks butt”
Electric Fan 16" Diameter
from $92.99
(34)
Electric Fan 16" Diameter
“Awesome”