2009 Mazda 3 Suspension Parts
More 2009 Mazda 3 Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 2009 Mazda 3, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 2009 Mazda 3 Suspension Parts
MOOG – Coil Spring Set (Part No.81003)
from
$131.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Monroe – Strut-Mate Shock Mounting Kit (Part No.906981)
from
$35.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Monroe – OESpectrum Strut (Part No.73016)
from
$168.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
- LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
- OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
- Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
- Premium – Limited Lifetime Warranty
- For Commercial Usage Refer to Product Warranty
Monroe – Strut-Mate Strut Mounting Kit (Part No.906980)
from
$68.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Whiteline – Control Arm Upper Arm (Part No.WA402)
from
$87.99
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings and premium quality ball joints (if applicable).
Product Features:
See More
Product Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Dorman – Suspension Shock Mount (Part No.924-412)
from
$31.99
This replacement shock mount is designed to directly replace the mount that comes stock on specified vehicle years, makes and models. It is precisely reverse-engineered to ensure original equipment quality, fit and durability.
Product Features:
See More
Product Features:
- Direct replacement – this shock mount is precision-engineered to match the fit and durability of the original shock mount on specific vehicles
- Complete kit – all necessary mounting hardware is included with each mount
- Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
- Proactive repair – it’s often smart to replace shock mounts when replacing worn out shocks
Suncore – Complete Strut Assem (Part No.55S11681)
from
$94.99
Complete Strut Assem
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5697)
from
$85.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
- Premium – Limited Lifetime Warranty
- For Commercial Usage Refer to Product Warranty
Monroe – Strut-Mate Strut Boot Kit (Part No.63632)
from
$29.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
Suncore – Quick Strut Kit (Part No.2-55S11681-001)
from
$194.99
Quick Strut Kit
Professional Parts Sweden – Trailing Arm (Part No.L2005405588PPS)
from
$279.27
Trailing Arm
Dorman – Control Arm Rear Lateral Link (Part No.521-337)
from
$54.99
This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Rare Parts – STRUT MOUNT (Part No.RP53653)
from
$109.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Meets or exceeds OE requirements
- Helps restore vehicle ride.
- Reduces tire wear
Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)
from
$14.49
Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
KYB – Strut Mount and Bearing (Part No.SM5884)
from
$69.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The Highest Quality Replacement Strut Mount Available
- Engineered And Built Specifically For The Mazda Cx-3, Cx-5, Mazda3, Mazda6, Scion IA, And Toyota Yaris IA
- Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
- Superior Rubber Reduces Noise, Vibration And Harshness
- Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
- Matched Grade Studs And Nuts
KYB – Strut Mount, Spring Seat and Bearing (Part No.SM5589)
from
$72.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The Highest Quality Replacement Strut Mount Available
- Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
- Superior Rubber Reduces Noise, Vibration And Harshness
- Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
- Matched Grade Studs And Nuts
Dorman – Suspension Trailing Arm Bushing (Part No.905-303)
from
$42.99
This suspension trailing arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Trailing Arm Bushing (Part No.K200064)
from
$30.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to meet or exceed OE requirements
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Whiteline – Brace Strut Tower (Part No.KSB633)
from
$231.99
You can never have too much chassis stiffness. Weight aside, the more the better. Chassis bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex. In fact, it helps every component in the suspension system do its job properly and you can feel the difference through improved turn-in, sharper steering response along with greater steering feedback.
Product Features:
See More
Product Features:
- Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
- Hand picked Whiteline bushings and/or alignment, geometry products best suiting your vehicle.
Driveworks – Strut Bellow (Part No.DW-K90460)
from
$11.99
Driveworks Shock Mount, Suspension Strut Bellows
Product Features:
See More
Product Features:
- Designed to meet or exceeds OE performance specifications
- Durable neoprene rubber
KYB – Jounce Bumper and Bellows (Part No.SB101)
from
$18.99
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Whiteline – Control Arm Lower Front Inner And Outer Bushing (Part No.W63320)
from
$89.99
Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.
Product Features:
See More
Product Features:
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
AST – Control Arm Bushing (Part No.L20301072768AST)
from
$17.47
Control Arm Bushing
Lemfoerder – OE Replacement Trailing Arm Bushing (Part No.L2006230280LEM)
from
$17.91
The Lemfoerder Trailing Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
Driveworks – Trailing Arm Bushing (Part No.DW-K200064)
from
$25.49
Driveworks Brand Control Arm Bushings are made to meet OE specifications. They play a role that isolate the high-frequency inherent vibration from the vehicle. Driveworks Brand chassis parts ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Replacement helps reduce vehicle noise and sway while turning
Dorman – Front Position Strut Bumper (Part No.523-043)
from
$20.99
This suspension strut bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment strut bumper on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Popular 2009 Mazda 3 Suspension Parts Categories
2009 Mazda 3 Suspension Parts
You count on your 2009 Mazda 3 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 87 Suspension Parts ranging in price from $6.29 to $445.05, you’re sure to find everything you need for your 2009 Mazda 3.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 17 different brands like Valvoline, Monroe, and Moog. 2009 Mazda 3 Suspension Parts start as low as $6.29!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,170 extensive product reviews on 2009 Mazda 3 Suspension Parts. Some of the top-rated Suspension Parts products we carry are Strut Bellow with 4.1 stars and Strut Bellows with 3.0 stars.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2009 Mazda 3 below to get started!
Top-Rated Suspension Parts Brands For Your 2009 Mazda 3
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2009 Mazda 3 running right for years to come. In our inventory you’ll find brands like Valvoline, Monroe, Moog, and even more.
Popular Dorman Suspension Parts
You’ll find popular Dorman brand products across Shocks and Struts. All are waiting to get your 2009 Mazda 3 back on the road. Some of the top-rated Dorman products in these categories are:
Top-Rated Monroe Suspension Parts
If Monroe are what you’re looking for, our inventory holds plenty. We stock Monroe brand Suspension Parts for your 2009 Mazda 3, and some of our most reviewed Monroe parts include:
FAQs for 2009 Mazda 3 Suspension Parts
What are the most purchased Suspension Parts for the 2009 Mazda 3?
Out of 87 Suspension Parts for the 2009 Mazda 3, the most popular in our inventory are:
from
$14.49
(2)
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
from
$11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
What are the top-rated 2009 Mazda 3 Suspension Parts?
Top-rated Suspension Parts for your 2009 Mazda 3 based on customer reviews/ratings are:
from
$135.99
(7)
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
“Suited its purpose was easy to assemble and good quality”
