2009 Lexus RX350 Car Parts & Accessories

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Product Features:

• Our units are all pre-aligned & pre-adjusted to save installation time and ensure proper switching.
• A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
• Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
• The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal
• Non-Stick Back-Up Ring
• Hardened Nitride Plated Steel Shaft
• Engineered In USA To OE Quality Standards For Performance And Durability
• IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
• Easy To Install In Just Minutes. No Special Tools Required.
• Exact Fit Original Equipment Design Guarantees Correct Fit And Function
• Consistent Performance In All Weather Conditions
• Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
• Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
• Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
• Safety compliant – part has undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

This liftgate release switch seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Simple replacement – this liftgate release switch seal directly replaces the original seal on specific Toyota, Lexus and Scion vehicles
• Protects switch – by replacing only the worn out seal, you protect the switch from water, dirt and debris
• Cost-effect solution – allows only replacement of worn seal rather than entire switch at dealership
• Easy installation – no special tools required during installation

New CAPA Certified Standard Replacement Passenger Side Fender Liner

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal
• Non-Stick Back-Up Ring
• Hardened Nitride Plated Steel Shaft
• Engineered In USA To OE Quality Standards For Performance And Durability
• IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
• Easy To Install In Just Minutes. No Special Tools Required.
• Exact Fit Original Equipment Design Guarantees Correct Fit And Function
• Consistent Performance In All Weather Conditions
• Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
• Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal
• Non-Stick Back-Up Ring
• Hardened Nitride Plated Steel Shaft
• Engineered In USA To OE Quality Standards For Performance And Durability
• IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
• Easy To Install In Just Minutes. No Special Tools Required.
• Exact Fit Original Equipment Design Guarantees Correct Fit And Function
• Consistent Performance In All Weather Conditions
• Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
• Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
• Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
• Safety compliant – part has undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

New CAPA Certified Standard Replacement Driver Side Fender Liner

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

New Standard Replacement Driver Side Replacement Mirror Glass, 5 7/16 X 6 15/16 X 7 7/8

Product Features:

• 5 7/16 X 6 15/16 X 7 7/8, Flat Glass
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Excellent value – original equipment quality at a lower price
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Excellent value – original equipment quality at a lower price
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Excellent value – original equipment quality at a lower price
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Excellent value – original equipment quality at a lower price
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Passenger Side Power Door Mirror, With Heated Glass, With Memory Paint To Match. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.

Product Features:

• With Heated Glass And Memory Paint To Match, Convex Glass
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Driver Side Power Door Mirror, With Heated Glass, With Memory, Paint To Match. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.

Product Features:

• With Heated Glass And Memory, Paint To Match, Flat Glass
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

• Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
• Mirror glass is power adjustable and heated
• OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
• Manual folding for additional clearance
• Black with Paintable to match cover

Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

• Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
• Mirror glass is power adjustable and heated
• OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
• Manual folding for additional clearance
• Black with Paintable to match cover

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Driver Side Power Door Mirror, With Heated Glass, Without Memory Paint To Match. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.

Product Features:

• With Heated Glass, Without Memory, Paint To Match, Flat Glass
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

New Standard Replacement Passenger Side Front Bumper Bracket

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Passenger Side Power Door Mirror, With Heated Glass, Without Memory Paint To Match. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.

Product Features:

• With Heated Glass, Without Memory Paint To Match, Convex Glass
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Restore the ease and convenience of remotely locking or unlocking any one of your vehicle’s doors with Dorman’s Door Lock Actuator Motor. The actuator returns the power door lock to proper operation-and our robust plastic housing helps protect the actuator from damage, ensuring year after year of service.

Product Features:

• Direct replacement for a proper fit every time
• High quality electric motor
• Durable construction
• Vehicle try-on testing has been conducted on this part to ensure trouble-free performance

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

• High torque and rigidity
• Sensor-safe, non-corrosive formula
• OEM specified
• Low-odor, non-corrosive formula
• Ideal for closed spaced bolt patterns

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to LEXUS 02-17; TOYOTA 01-18;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2001-2018
• Weight approx: 5 Lbs
• HYDRAULIC

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Crowned raceways and rollers to ensure even load distribution for maximum life
• Industry leading coverage
• Professional technicians know they can depend on National

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Crowned raceways and rollers to ensure even load distribution for maximum life
• Industry leading coverage
• Professional technicians know they can depend on National

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Crowned raceways and rollers to ensure even load distribution for maximum life
• Industry leading coverage
• Professional technicians know they can depend on National

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

This automatic transmission speed sensor matches the fit and function of the original equipment sensor to restore critical speed-dependent vehicle functions. This part has been engineered and rigorously tested to ensure reliable performance.

Product Features:

• Direct replacement – this automatic transmission speed sensor matches the fit and function of the original equipment sensor
• Durable construction – this sensor is engineered to precise standards to ensure accurate signal output
• Easy installation – this sensor is installed using the original hardware and plugs into the vehicle’s existing wiring
• Quality tested – this part has undergone try-on validation and rigorous quality testing to ensure a quality fit and long service life

This replacement engine oil drain plug is a direct replacement for a damaged or worn original equipment drain plug, precisely matching the thread pitch to ensure a quality seal.

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.

Product Features:

• Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement
• Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance
• Cost-effective solution – offers original equipment performance at competitive price
• Quality tested – this part has undergone try-on testing to ensure a quality fit

Dorman’s Oil Drain Plugs are coated for high corrosion resistance and a long service life. Many styles are available, including standard, inset gasket, molded gasket, magnetic, and pilot point.

Product Features:

• Direct replacement for a proper fit every time
• Dorman’s oversized, piggyback, and rubber expanding plugs eliminate the need to replace the entire pan, saving you time, labor and money
• Our Oil Drain Plugs are designed and constructed to strict engineering quality standards
• Oil Drain Plugs are also included with many of Dorman’s Engine Oil Pans

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to LEXUS 07-09;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2007-2009
• Weight approx: 3 Lbs

Product Features:

• Brand may vary by location

Product Features:

• Brand may vary by location

Product Features:

• Brand may vary by location

Shift Solenoid

Product Features:

• Brand may vary by location

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Recognized worldwide for their quality and reliable performance for every type of repair
• Temperature range: -20°F to 300°F; -29°C to 149°C

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

• Product might not be available in all states due to local laws.
• We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
• Each Moveras transmission is produced in a World Class manufacturing facility
• Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
• Our transmissions are produced in a Clean Room environment
• Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Dorman’s Auto Trans Oil Cooler is quality-engineered to cool automatic transmission fluid, prolonging its life. The Auto Trans Oil Cooler consequently helps prevent transmission fluid leaks and overheating, protecting the transmission from possible costly damage. Recommended for replacement when replacing the transmission.

Product Features:

• Coated for high corrosion resistance and increased protection against the elements
• Durable aluminum construction for long-lasting performance
• Direct replacement for a proper fit every time
• Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards (Video)

AT Solenoid

AT Solenoid

Freeze Plug Heater Cartridge made of cast aluminum. Interchangeable with the manufacturers original equipment-the only cost effective aftermarket solution available. Installs easily, just install in engine block core hole. No longer necessary to remove frost plug or drain coolant-just coat wit NSCG silicone grease G-624 (not included), insert, and clip into place. Original equipment for Toyota, Chrysler-jeep, Hyundai, Kia, and General Motors applications (see application guide for details). Simplified application information-Entire range of manufacturers applications covered by only five part numbers.

Product Features:

• Freeze plug heater cartridge

The Rightline Gear Sport 2 Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport 2 is a popular size for many travelers.

Product Features:

• Capacity: 15 cu ft
• Dimensions: 42″ L x 34″ W x 18″ H
• Designed for SUVs, minivans, and crossovers, WITH or WITHOUT a roof rack
• 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

HIGHLAND all weather floor mats offer the ultimate protection for front and rear floors. These durable, pliable floor mats will not stiffen or crack even in the harshest of weather conditions. Protect your investment and increase your resale value with these high quality floor mats.

Product Features:

• Easily installed and removed – no tools required
• Designed to fit your specific vehicle contours
• Raised ridges confines dirt and water to keep your vehicles carpet clean
• Anti-skid spikes on back of mats prevent the mat from slipping

Autocraft Easy Fit SUV cover offers superior protection for your vehicles. The fabric which is soft, breathable and with water repellent coating does not only prevent your vehicles from scratching but also protect against mold and mildew. It designed with full elastic, double stitched hem, reinforced grommets and rope to ensure a better and secure fit. Bag included for convenient storage.

Product Features:

• Fit SUVs 15′-19′ (4.5m-5.8m)
• Lightweight, breathable, non-abrasive fabric
• Water repellent coating, protects against mold and mildew
• Full elastic and double stitched hem to ensure a better fit
• 2 built-in reinforced grommets and 1 rope are included to keep your cover in place
• Antenna hole patch included to provide additional protection from water or dust soak into the hole that you cut for antenna to pass through
• Bag included for easy storage

HIGHLAND all weather floor mats offer the ultimate protection for front and rear floors. These durable, pliable floor mats will not stiffen or crack even in the harshest of weather conditions. Protect your investment and increase your resale value with these high quality floor mats.

Product Features:

• Easily installed and removed – no tools required
• Designed to fit your specific vehicle contours
• Raised ridges confines dirt and water to keep your vehicles carpet clean
• Anti-skid spikes on back of mats prevent the mat from slipping

HIGHLAND all weather floor mats offer the ultimate protection for front and rear floors. These durable, pliable floor mats will not stiffen or crack even in the harshest of weather conditions. Protect your investment and increase your resale value with these high quality floor mats.

Product Features:

• Easily installed and removed – no tools required
• Designed to fit your specific vehicle contours
• Raised ridges confines dirt and water to keep your vehicles carpet clean
• Anti-skid spikes on back of mats prevent the mat from slipping

Autocraft Easy Fit SUV cover offers excellent protection for your vehicles. 3 layers construction includes reflective UV resistant layer, water resistant layer and non-abrasive soft inside layer. The construction does not only prevent your vehicles from scratching but also protects against mold and mildew. Suitable for indoor and outdoor use. It designed with a full elastic, ultrasonic sewn hem and reinforced grommets to ensure a better fit and extreme durability. Bag included for convient storage.

Product Features:

• Fit SUVs 15′-19′ (4.5m-5.8m)
• Medium weight, breathable, non-abrasive fabric for indoor and outdoor use
• Water resistant layer, protects against mold and mildew
• UV treatment protects vehicle from sun damage
• Full elastic and ultrasonic sewn hem to ensure a better fit and extreme durability
• 2 built-in reinforced grommets and 1 rope are included to keep your cover in place
• Antenna hole patch included to provide additional protection from water or dust soaking into the hole that you cut for antenna
• Bag included for easy storage

This floor mat retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this floor mat retainer matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The Rightline Gear Car Back Carrier is a patented cargo bag that attaches to the rear of your vehicle, WITH or WITHOUT a roof rack. The perfect solution for those who engage in paddle sports, snow sports, or cycling. Keep your gear on the roof and your cargo on the back! The location of the Carrier allows for easy access and also shields it from the wind, saving you $$$ at the gas pump. The Carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The bottom pole frame provides structural support for the cargo in the bag. The Rear Car Clips attach the Car Back Carrier to the rear hatch door on vehicles without a roof rack.

Product Features:

• Capacity: 13 cu ft
• Dimensions: 40″ L x 20″ W x 28″ H
• Designed for SUVs, minivans, and crossovers, WITH or WITHOUT a roof rack
• 100% Waterproof with welded seams and a urethane coated zipper
• Includes: carrier, bottom pole frame, (2) Rear Car Clips, (1) 2″ W belt strap, (2) 1″ W bottom straps, and stuff sack with sewn-in set up guide
• PVC Mesh (polyester re-enforced PVC) and Hydrotuff Material (PVC-backed polyester), UV resistant
• Attaches to SUVs, minivans, and crossovers WITH a roof rack (either side rails or cross bars)
• Attaches to SUVs, minivans, and crossovers WITH a roof rack (either side rails or cross bars)
• Install on vehicles WITHOUT a roof rack with Cargo Saddlebag Car Clips (purchased separately)
• Bottom pole frame provides structure and rigidity for the bag
• Includes: Cargo Saddlebag, bottom pole frame, (1) 2″ W belt strap, (2) 1″ W bottom straps, stuff sack, and sewn-in set up guide

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

• Capacity: 10 cu ft
• Dimensions: 36″ L x 30″ W x 16″ H
• Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
• 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

New Standard Replacement Front Center Undercar Shield, Japan Built Models

Product Features:

• Japan Built Models, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Engine Heater; Replacement Cord

The Range Jr Car Top Carrier is weatherproof + and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. Use the Range Carrier on your next family vacation, backwoods expedition, shopping spree, or move.

Product Features:

• Dimensions: 36″ L x 32″ W x 15″ H
• Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
• Weatherproof + with welded seams and a urethane coated zipper
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

New Standard Replacement License Bracket, Japan Built

Product Features:

• Korea Built Models, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

As the most heavy duty car covers on the market, the WeatherShield HD car cover is built to handle the most intense weather and climates. Toughest of the tough, the WeatherShield HD car covers are constructed from 40% heavier fabric and stronger thread providing double the tear strength, double the tensile strength. Proprietary processes place a specially formulated finish inside the fabric, bonding each individual thread so there is virtually no space between them for water or dirt or pollutants to enter. The WeatherShield HD may not be as silky-smooth as other car covers, but it will out perform them in harsh climates! Designed as a long-term storage solution. Comes with a 5-year warranty.

Product Features:

• The most heavy-duty car cover on the market
• Specially treated to resist fading and color transfer
• Sheds water and blocks out dust
• Outsmart the outdoors!
• 5-year warranty

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab. Backed by a 5-year warranty.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage
• 5-year warranty

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab. Backed by a 5-year warranty.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage
• 5-year warranty

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab. Backed by a 5-year warranty.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage
• 5-year warranty

For those who like traditional woven fabrics for indoor car cover protection, the Tan Flannel is the perfect choice. This is a high performance indoor fabric with a durable Polycotton blend on the outside and a flannel underside soft napped finish. Its long wearing and breathable. Specially treated to repel moisture and resist rot and mildew. Comes with a 90-day warranty.

Product Features:

• A favorite amongst car enthusiasts
• Flannel lined for an ultra-soft, paint-friendly cover
• Constructed from all cotton based materials
• Our ‘classic’ indoor cover
• 90-day warranty

Covercraft’s custom fit Polycotton Car Cover provides good basic indoor protection for your vehicle. A good choice for a budget conscience shopper looking for basic coverage and protection. Constructed from drill weave Polycotton blend materials. Fabric is soft and durable to protect your paint finish. Polyester material is sun and water resistant. Comes in gray. Backed by a 90-day warranty.

Product Features:

• Good basic indoor protection
• Drill weave Polycotton blend
• Resists tears and punctures
• Treated to resist rot and mildew
• 90-day warranty

WeatherTech Cargo Liners provide complete trunk and cargo area protection. Our Cargo Liners are digitally designed to fit your vehicle and feature a raised lip to keep spills, dirt and grease off your vehicles interior, protecting your investment from normal wear and tear. WeatherTech Cargo Liners feature a textured finish that helps to keep cargo from shifting. Perfect for hauling just about anything from gardening supplies to construction materials, even the family pet. WeatherTech Cargo Liners meet FMVSS302 standards. Cargo Liners are proudly designed, engineered and manufactured with American made tooling in the USA. Available for car trunks, minivans and SUVs in Black, Tan or Grey.

Product Features:

• Interior Protection From All Types Of Wear And Tear
• Custom Molded Specifically For Your Vehicle
• High Outside Lip That Helps Contain Spills
• Quick And Easy Cleanup
• A Skid Resistant Surface
• Protects And Preserves The Cargo Area And Trunk Carpet
• Toughness And Durability
• Easy Installation
• Limited Lifetime Warranty

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

Cargo Area Liner are custom patterned protection for your vehicle cargo area. Protect your OE carpet from spills and stains with this easy to install liner. Constructed of durable waterproof urethane-coated polyester fabric. Both the cargo area and the back of rear seat are covered and protected. Adjustable straps and side-release buckles attach around the vehicle headrests. Designed to allow split seat backs to work in the up or down position. Comes with a bumper flap that easily pulls out from underneath when needed.

Product Features:

• Patterned protection for your vehicle cargo area
• Easy to install
• Durable waterproof urethane-coated polyester fabric
• Both the cargo area and the back of rear seat are covered and protected
• Adjustable straps and side-release buckles attach around the vehicle headrests
• Designed to allow split seat backs to work in the up or down position
• Comes with a bumper flap that easily pulls out from underneath when needed

In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech have worked tirelessly to develop the most advanced floor protection available today. The WeatherTech FloorLiner accurately and completely lines the interior carpet giving absolute interior protection. The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the vehicle footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit. A patent pending High-Density Tri-Extruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner over the door sill. No muss-no fuss.

Product Features:

• Accurately And Completely Lines The Interior Carpet Giving Absolute Interior Protection
• Lines The Interior Carpet Up The Front, Back And Even Up The Sides Of The Vehicles Footwell
• Digital Laser Measurements Of Interior Surfaces Offer A Consistently Perfect Fit
• A Patent Pending High-Density Tri-Extruded Material Allows For A Rigid Core For Strength While Offering Surface Friction To The Carpet, As Well As Tactile Feel To The Surface
• Advanced Surfacing Creates Channels That Carry Fluids And Debris To A Lower Reservoir With Further Channeling To Help Minimize Fluid Movement While Driving
• Manufactured From A Proprietary Custom Blended Thermopolyolefin That Is Not Only Wear Resistant, But Also Remains Flexible Under Extreme Temperatures
• Available in fronts, rears, center hump, 3rd and 4th row, and complete sets
• Available in black, tan, grey and cocoa

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

• Custom fit to the windshield for complete coverage
• Protect the dash and other interior components from damage by the sun
• Reduce the interior temperature of the vehicle on hot days
• The foam core center of the shield acts as an insulator
• Easy to use and store away when not in use

HIGHLAND all weather floor mats offer the ultimate protection for front and rear floors. These durable, pliable floor mats will not stiffen or crack even in the harshest of weather conditions. Protect your investment and increase your resale value with these high quality floor mats.

Product Features:

• Easily installed and removed – no tools required
• Designed to fit your specific vehicle contours
• Raised ridges confines dirt and water to keep your vehicles carpet clean
• Anti-skid spikes on back of mats prevent the mat from slipping

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

The Limited Edition Custom Dashboard Cover features a new warp-knit polyester fabric style that looks great with today’s vehicle interiors. Individually made to fit your vehicle’s specific dashboard. DashMat dashboard covers are a stylish way to cut windshield haze caused by gasses emitted from the dashboard. Dramatically reduces hazardous windshield glare as well. Rays from the sun beat through the dashboard at extremely high temperatures causing damage to the dashboard. Limited Edition DashMat dash covers protect your vehicle’s dashboard in the most extreme temperature conditions.

Product Features:

• Unique warp-knit design fits perfectly with today’s vehicle interiors
• Compliments technical fabrics in newer vehicles
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Vents and sensor openings pre-cut for a factory finish look
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

This seat belt buckle button stop is designed to match the appearance, fit and function of the original stop on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this seat belt buckle button stop is designed to match the appearance, fit and function of the original stop on specified vehicles
• Restores functionality – this buckle stop is made to fully restore appearance and functionality after the original part fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Air Bag Clockspring

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water repellent finish that ll combat any juice box spill, cereal crumbs or pet mess. It s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only It is designed to fit most bench style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water-Repellent Finish That Will Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

The Limited Edition Custom Dashboard Cover features a new warp-knit polyester fabric style that looks great with today’s vehicle interiors. Individually made to fit your vehicle’s specific dashboard. DashMat dashboard covers are a stylish way to cut windshield haze caused by gasses emitted from the dashboard. Dramatically reduces hazardous windshield glare as well. Rays from the sun beat through the dashboard at extremely high temperatures causing damage to the dashboard. Limited Edition DashMat dash covers protect your vehicle’s dashboard in the most extreme temperature conditions.

Product Features:

• Unique warp-knit design fits perfectly with today’s vehicle interiors
• Compliments technical fabrics in newer vehicles
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Vents and sensor openings pre-cut for a factory finish look
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Limited Edition Custom Dashboard Cover features a new warp-knit polyester fabric style that looks great with today’s vehicle interiors. Individually made to fit your vehicle’s specific dashboard. DashMat dashboard covers are a stylish way to cut windshield haze caused by gasses emitted from the dashboard. Dramatically reduces hazardous windshield glare as well. Rays from the sun beat through the dashboard at extremely high temperatures causing damage to the dashboard. Limited Edition DashMat dash covers protect your vehicle’s dashboard in the most extreme temperature conditions.

Product Features:

• Unique warp-knit design fits perfectly with today’s vehicle interiors
• Compliments technical fabrics in newer vehicles
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Vents and sensor openings pre-cut for a factory finish look
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost