2009 Honda Civic Steering and Chassis Parts
More 2009 Honda Civic Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 2009 Honda Civic, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 2009 Honda Civic Steering and Chassis Parts
Maval – Power Steering Pump, Remanufactured (Part No.M2010296081MAV)
from
$183.47
Since its founding in 1987 Maval Manufacturing has been a world leader in the remanufacturing of power rack and pinion systems and related components. Trusted by Original Equipment Service Organizations and Global Distributors alike, Maval has consistently delivered the finest Remanufactured Rack and Pinions, Gear Boxes, and Power Steering Pumps to customers around the globe. Applying OE-experience and standards results in a remanufactured power steering pump that offer like-new quality and dependability.
Product Features:
See More
Product Features:
- OEM-Quality and Direct Fit replacement
- Components are inspected and cleaned of rust and corrosion.
- Shaft and internal surfaces are inspected, reconditioned and polished.
- Seals and O-rings are replaced with new, OE-equivalent parts.
- Assembled units are 100% functionally tested for leaks and performance.
Driveworks – Steering Tie Rod End (Part No.DW-ES3331R)
from
$34.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
Powercraft – Pump Seal Kit (Part No.8943)
from
$33.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rare Parts – Sway Bar Bushing (Part No.RP18995)
from
$32.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Driveworks – Camber Bolt Kit (Part No.DW-K90474)
from
$20.29
DRIVEWORKS Chassis parts are designed to meet OE specifications, help ensure improved steering response and reduce tire wear. DRIVEWORKS Chassis parts are set to help eliminate front-end vibration, shimmy and unsafe handling. DRIVEWORKS Chassis parts have been engineered and manufactured under the proven quality systems. DRIVEWORKS Chassis parts are made to provide stable and durable quality solutions and meet customer expectations.
Product Features:
See More
Product Features:
- Designed to meet OE Form, Fit, and Function.
- Performance tested to ensure durability and reduce tire wear.
- Precision engineered for improved ride and steering response.
- Hardware included for ease of installation (where applicable)
Dorman – Help – Power Steering Reservoir Cap (Part No.80983)
from
$8.99
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.
Product Features:
See More
Product Features:
- Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
- Durable construction – made of quality materials for leak-free performance and a long service life
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
MOOG – Toe Adjusting Kit (Part No.K100396)
from
$26.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Returns like-new steering
- Long-lasting performance
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Imperial – Mounting Kit System (Part No.226201)
from
$11.49
Product Features:
See More
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Atermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
MOOG – Camber Adjusting Kit (Part No.K100024)
from
$28.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
PWR – New Hydraulic Power Rack and Pinion (Part No.42-1712)
from
$687.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function
Product Features:
See More
Product Features:
- PWR Rack and Pinions are 100% NEW and Engineered In North America
- All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
- Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
- Includes: Factory Installed OE Mounting Bushings, Inner Tie Rods, Jam Nuts (as required), Precision Routed Fluid Transfer Lines, required Installation Seals, Hardware, and Instructions
- Precision Routed and Constructed Fluid Transfer Tubes
- Manufactured to meet or exceed OE requirements
- Engineering, test, and quality validation in the USA
Carquest Premium – End Fittings (Part No.34830)
from
$20.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Zinc coated tubes protect against rust and corrosion
Dorman – Front Right Steering Knuckle (Part No.686-002)
from
$615.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit – precision-engineered to match the dimensions of original components
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
Driveworks – Bellow Kits (Part No.DW-K9367)
from
$15.99
Driveworks Brand Bellow kits are made to OE specifications. They work with the steering tie rod end, preventing the entering of dust and prolonging the useful life of the inner parts. Driveworks Brand chassis parts help ensure improved steering response a
Product Features:
See More
Product Features:
- Designed to meet or exceeds OE performance specifications
- Durable neoprene rubber
Imperial – Quick Connect Coupler (Part No.240250)
from
$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$31.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)
from
$2.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Driveworks – Camber Bolt Kit (Part No.DW-K90476)
from
$8.99
Camber Bolt Kit
Whiteline – Control Arm Lower Inner Rear Bushing (Part No.KCA366)
from
$45.99
Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.
Product Features:
See More
Product Features:
- Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)
from
$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
MTC – P/S Hose O-Ring (Part No.M2019377065MTC)
from
$2.68
P/S Hose O-Ring
Powercraft – Rack Pinion Seal Kit (Part No.8645)
from
$68.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
MOOG – Ball Joint (Part No.K9802)
from
$60.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Rein – Power Steering Suction Hose (Part No.PSH0406)
from
$31.99
Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.
Product Features:
See More
Product Features:
- A direct fit, replacement hose with clamps
- OE quality, braided rubber compound hose
- Pre attached protective jacket(s) and heat sleeve(s), where required
- Ensures proper operation of the power steering system
Rare Parts – Ball Joint (Part No.RP10504)
from
$75.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Whiteline – Sway Bar Link (Part No.KLC140-335)
from
$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
Product Features:
See More
Product Features:
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
- Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
Dorman – Power Steering Reservoir: White And Gray, Plastic, Original Equipment Replacement (Part No.603-953)
from
$31.49
This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.
Product Features:
See More
Product Features:
- Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation
- Complete assembly – includes reservoir and reservoir cap
- Reliable performance – built to withstand excessive heat and vibration
- Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life
Popular 2009 Honda Civic Steering and Chassis Parts Categories
2009 Honda Civic Steering and Chassis Parts
You count on your 2009 Honda Civic to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 116 Steering and Chassis Parts ranging in price from $1.59 to $627.99, you’re sure to find everything you need for your 2009 Honda Civic.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 19 different brands like Imperial, Cardone, and Moog. 2009 Honda Civic Steering and Chassis Parts start as low as $1.59!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 2,702 extensive product reviews on 2009 Honda Civic Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Camber Adjusting Kit with 4.1 stars and Control Arm and Ball Joint Assembly with 4.2 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2009 Honda Civic below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 2009 Honda Civic
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2009 Honda Civic running right for years to come. In our inventory you’ll find brands like Imperial, Cardone, Moog, and even more.
Popular Carquest Premium Steering and Chassis Parts
You’ll find popular Carquest Premium brand products across Sway Bars and Power Steering Parts. All are waiting to get your 2009 Honda Civic back on the road. Some of the top-rated Carquest Premium products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 2009 Honda Civic, and some of our most reviewed Imperial parts include:
FAQs for 2009 Honda Civic Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 2009 Honda Civic?
Out of 116 Steering and Chassis Parts for the 2009 Honda Civic, the most popular in our inventory are:
What are the top-rated 2009 Honda Civic Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 2009 Honda Civic based on customer reviews/ratings are:
from
$34.99
(9)
Camber Adjusting Kit
“It worked great. Just got my alignment done. It could’ve been a little expensive.”
from
$85.99
(5)
Control Arm and Ball Joint Assembly
“Replaced lower control arms on 2009 civic.
Solidly constructed and fit as expected.
Bolt-on installation.”
