Name: AT Cooling Hose
Brand: ACDelco
SKU: J2000576932ACD
Price: 52.36 USD

from

$52.36

AT Cooling Hose

from

$124.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$58.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$19.49

Product Features:

Used on cars and trucks when the original quick connector fails, or the replacement hose does not include them
Manufactured w/ a new design that retains the O-ring so they cannot get lost or damaged
Fit just as the OEM quick connects for easy installation as well as removal

from

$21.99

The O-rings in this radiator coolant hose O-ring kit are designed to match the fit and function of original equipment O-rings on specified vehicles and are engineered to help securely seal hose connections when an existing O-ring has failed.

Product Features:

Direct replacement – this O-ring matches the fit and function of the original O-ring on the factory-updated version of the lower heater hose on 2014-06 GM vehicles
Cost-effective repair – inexpensive alternative to dealership forcing an entire hose replacement just to replace an O-ring
Application specific – engineered to fit only the updated OEM radiator hose on specified vehicles; it will not fit the lower radiator hose that was factory-installed on 2014-06 Chevrolet and GMC vehicles
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$35.99

Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair..

Product Features:

Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles.
Durable construction – made of fuel-resistant materials to reduce future failure potential
Regulatory compliant – built to meet emission and inspection standards
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$2.49

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time, which prolongs service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Caution: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$107.99

This replacement fuel injector line is precision-engineered to match the fit and design of the original fuel injector line on specific vehicles. It comes with any vehicle-specific mounting hardware for a complete installation.

Product Features:

Direct replacement – this fuel injector line is engineered to match the original fuel injector line on specified vehicles
Robust materials – manufactured with a material-hardening process to ensure lines withstand high pressure during engine operation
Critical fix – because all fuel injectors lines have a one-time-use, crushable seal, replacement of entire line is necessary for optimal seal
Cost-effective solution – part is quality-tested and less expensive than getting replacement from dealership

from

$135.16

The ACDelco GM Original Equipment Fuel Supply Hose will provide the same performance, durability, and service life as your factory original equipment.

Product Features:

GM-recommended replacement part for your vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$92.99

This Litens supplied tensioner is manufactured to original equipment specifications. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

Heavy duty thermoplastic pulley construction.
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Installation instructions included

from

$385.99

GM Genuine Parts Fuel Feed and Return Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$1.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$29.99

Fixing a failed original plastic coolant hose connector usually requires replacing the entire coolant hose assembly. This Dorman OE FIX coolant hose connector is made from aluminum for greater durability and saves expense by allowing the replacement of just the failed connector..

Product Features:

Saves money – directly replace a failed coolant hose connector rather than buying an entire new hose assembly from the original automaker.
Improved design – made of durable aluminum instead of plastic to better resist temperature fluctuations and help prevent future failures
Ensures fit – includes hose clamps for a complete repair and perfect fit on specified makes, models and years
Quality assured – backed by a team of product experts in the United States and more than a century of automotive experience

from

$62.99

This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$25.99

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
Premium bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation under severe conditions

from

$310.99

Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$64.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$109.99

This Litens Serpentine Belt Drive Component Kit fits 1999-2002 Chev Avalanche, Silverado, Tahoe, Suburban / GMC Sierra, Yukon w/4.8/5.0/5.3/6.0L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$56.99

Fuel injector return line kit includes fuel line, injector fittings, fitting seals and retaining clips. Services one side of engine.

Product Features:

Includes fuel return line
Includes 4 plastic injector return fittings
Includes 4 metal fitting clips
Includes 4 fitting O-rings
Premium OE quality materials
Services one side of engine

from

$43.93

Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:

Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
Precision molded teeth are protected by durable fabric facing for long life
Tensile cord is engineered and tested for maximum load carrying capabilities
Rubber backing resists abrasion, oil and heat

from

$47.99

GM Genuine Parts PCV Valve Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$32.27

The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application.
Precision bearing
OE High quality pulley assembly
Durable long life performance.

from

$60.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$83.99

Original equipment HVAC heater hose assemblies often fail due to cracks in the plastic Y-connector. This Dorman OE FIX replacement features an upgraded aluminum Y-connector to prevent similar failures in the future.

Product Features:

Upgraded material – this replacement engine heater hose assembly features an aluminum Y-connector for added durability
Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
Complete replacement – includes necessary clamps for easy installation
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$29.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$71.99

This replacement fuel line is made to safely transfer fuel and endure in tough underhood and undercar conditions.

Product Features:

Trustworthy replacement – this fuel line safely replaces the original fuel line to fix fuel leaks
Durable design – withstands tough underhood and undercar conditions
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Comprehensive solutions – this fuel line is part of a diverse collection of fuel line repair solutions

from

$451.99

Original equipment fuel lines often leak due to rust and corrosion. This Dorman OE FIX kit includes upgraded stainless steel fuel lines that increase durability. They are also pre-formed to fit specific vehicles for easier installation.

Product Features:

Stainless Steel Fuel Line Kit
Stainless Steel Fuel Line Kit
Original equipment fuel lines often leak due to rust and corrosion. This Dorman OE FIX kit includes upgraded stainless steel fuel lines that increase durability. They are also pre-formed to fit specific vehicles for easier installation.
Upgraded replacement – the replacement fuel lines in this kit are made of stainless steel for added corrosion resistance
Pre-formed fit – these lines are already shaped to fit specific applications for easier installation