Name: Wheel Lug Nut: M12-1.50 Thread, Conical 60, Dometop, 1.26" Length, Natural, 1 Pack
Brand: Dorman
SKU: 611-303.1
Price: 7.29 USD

from

$7.29

The original lug nut on certain vehicles has a failure-prone two-piece design that makes rust common and repair difficult. This Dorman OE FIX replacement has a one-piece, carbon steel design to prevent future problems. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:

Wheel Nut M12-1.50 Capped – 19 Mm Hex, 32.1 Mm Length
Wheel Lug Nut: M12-1.50 Thread, Conical 60, Dometop, 1.26″ Length, Natural, 1 Pack
Improved design – this replacement lug nut changes the original two-piece design to one piece for greater reliability
Thoroughly tested – part has undergone proof load, salt spray, hardness and thread check testing to meet strict standards

from

$3.49

Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$4.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$14.34

Wheel Bearing Circli

from

$40.49

Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$41.99

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Maximum Signal Strength, Battery Reliability.
15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
Combined Frequency – 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99 Percent of OE Sensors
Meets SAE Standards J1205 and J1206
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$23.99

Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$352.99

Backed by superior materials and rigorous testing, MOOG complete knuckle assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

COMPLETE SOLUTION — Pre-assembled for convenience and includes premium parts like a MOOG knuckle, MOOG wheel hub with studs, bearing, axle nut, backing plate and premium ball joint (where applicable) for a complete solution
EASY TO INSTALL — Innovative bolt-on, pre-assembled solution designed to make troublesome bearing replacement easier and eliminate the need for special tools or a press
CORROSION PROTECTION — e-Coated backing plate and knuckle provides long-lasting corrosion resistance
STRONG AND DURABLE — Engineered with high-quality materials to provide long life and dependability
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$68.99

Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:

MX-Sensor Components
4 Metal Valves
4 Rubber Valves
Rubber Gasket (2×10 pcs)
Screw Nut (2×10 pcs)
Washer (2×10 pcs)
Metal Valve Cap (2X10 pcs)
Rubber Valve Cap (2X10 pcs)
Valve Core (2X10 pcs)

from

$107.99

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

from

$63.99

Protect the braking system from debris and corrosive weather conditions with this rust-resistant replacement brake dust shield. Dimensional verification and salt spray testing ensures proper fit and extended service life.

Product Features:

Effective replacement – designed to match the fit and function of the stock brake dust shield on specific vehicle applications
Longer service life – corrosion-resistant steel construction protects brakes from elements and debris
Ideal fix – directly replaces highly deterioration-prone original part
Precision-engineered – has undergone dimensional verification and salt spray testing to ensure quality

from

$3.49

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:

Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$5.99

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

Diamond Striped Kit for Clamp-in REDI-Sensors and many OE vehicles

from

$2.99

Rubber – straight in screw

from

$9.49

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

Black anodized clamp-in stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
0.453″ rim hole compatibility
200 PSI maximum cold inflation pressure

from

$6.49

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

Rubber TPMS stem for 7002A, 7003, 7004 REDI-Sensor
0.453″ rim hole compatibility
80 PSI maximum cold inflation pressure

from

$40.99

Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$194.99

The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome with gold PVD producing a superior finish while protecting against rust.
For aluminum wheels only.
Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch

from

$374.99

Backed by superior materials and rigorous testing, MOOG complete knuckle assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

COMPLETE SOLUTION — Pre-assembled for convenience and includes premium parts like a MOOG knuckle, MOOG wheel hub with studs, bearing, axle nut, backing plate and premium ball joint (where applicable) for a complete solution
EASY TO INSTALL — Innovative bolt-on, pre-assembled solution designed to make troublesome bearing replacement easier and eliminate the need for special tools or a press
CORROSION PROTECTION — e-Coated backing plate and knuckle provides long-lasting corrosion resistance
STRONG AND DURABLE — Engineered with high-quality materials to provide long life and dependability
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$98.77

Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:

Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
Special bearing seals to help keep out contaminants, the number one cause of bearing failure
Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
Integral bearing races specifically designed to each application, no one-size-fits-all solution
Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
Original equipment specifications minimize any possibility of the hub cracking
Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
Tapered roller bearings for high load rates when specified

from

$147.81

SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. SKF wheel hub bearing units carry a flange for wheel and brake rotor attachment and a second flange for fixing the unit to the suspension. This fully integrated system provides a significant simplification in corner design and handling when compared with more traditional designs. The dynamic load carrying capacity is maximized by the use of a separate inner ring for the inboard ball row. This ring is mounted with an interference fit. The outer ring flange is bolted to the suspension. The rotating inner ring, with its tough flange, spigot and threaded holes or studs, is designed for mounting of the brake and wheel. Greased and sealed for life, the SKF wheel hub assembly is used for both driven and non-driven wheel applications. For driven wheel applications, torque is transmitted to the inner ring via an included spline.

Product Features:

OE sensors assure correct ABS functions
Premium seals, both inboard and outboard, protect the bearing
Wheel bearing design with ball bearings or tapered roller bearings and integral wheel hub.
The bearing units have preset internal clearance, are supplied greased for life and have integrated seals.
Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
100% tested to the actual OE specifications per part number for fit, form and function
High quality steel and surface finishes
Proper implementation of heat treatment

from

$186.99

Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RELIABLE PERFORMANCE — Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
KEEPS WATER AND DIRT OUT — Quad lip seal design inhibits damage by keeping moisture and other contaminants out
EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$156.99

WJB Automotive wheel hub assemblies are made with high precision through state-of-the-art technology and manufactured with strict quality-control criteria. Every wheel hub assembly is specifically designed to fit the designated applications and may be used as a direct replacement for the original part. Each part is engineered using OE data and measurements to ensure fitment, performance, and longevity.

Product Features:

Fitment and function are ensured by precision machining, rigorous testing, and meticulous inspection of material and components.
WJB Automotive wheel hub assemblies are designed to meet stringent fatigue requirements in order to reduce premature failure.
Reinforced seal design material allows for optimal performance in harsh environments.
WJB Automotive wheel hub assemblies undergo heat treatment and cold-forming processes that harden the surface ensuring high-temperature resistance and durability.
Where applicable, pre-installed speed sensors will automatically sync to the vehicle’s anti-lock braking system upon successful installation and provide accurate speed-reading data.
Brand may vary by location

from

$38.99

Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$26.49

Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$104.99

Coast to Coast International Wheel Covers are a quick and cost effective alternative to replacing factory OEM wheel covers that have been lost, stolen or worn over time. With a wide variety of designs and finishes, it is easy to find a style that is right for any vehicle. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

Designed And Manufactured To Fit Steel Wheels And Emulate OEM Designs
Constructed From High-Quality, Durable, Automotive Grade ABS
Two Layers Of Clear Coat Enhance And UV Protect The Finish
A Cost Effective Alternative To Replace OEM Wheel Covers That Have Been Lost, Stolen Or Worn Over Time
Installs In Minutes Without Tools
Bolt on retention, most secure wheel cover retention

from

$129.99

CCI Impostor wheel skins are an easy and affordable way to upgrade the trim level appearance of your vehicle. Constructed of ABS plastic and avaiable in a variety of finishes, CCI Impostor wheel skins are simple to install and provide years of head turning style. Pair them with CCI grille overlays, mirror covers and door handle covers to complete the look.

Product Features:

Designed and manufactured for quality fitment and finish
Easy to install, long lasting finish
Manufactured with automotive grade ABS, Quality and durable product
Emulates factory styling and enhances OEM design
27 hour CASS test, chrome plating tested to ensure quality and durability
Spoke Retention, No wheel weight issues, quick installation
Limited Lifetime Warranty

2009 Ford Escape Wheels and Tires

More 2009 Ford Escape Wheels and Tires Categories

Essential 2009 Ford Escape Wheels and Tires

Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Dometop, 1.26" Length, Natural, 1 Pack (Part No.611-303.1)

Schrader – TPMS Sensor Service Kit (Part No.20018)

Driveworks – Taper Bearing Cup (Part No.S-M-86610)

Dorman – Wheel Bearing Circli (Part No.K8027162686DOR)

Dorman – Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Tuner, 1.298" Length, Chrome, 20 Locks/1 Key (Part No.711-345)

Autel – Adjustable Angle 1-Sensor Rubber (Part No.300020)

Schrader – TPMS Ni Plated Valve Core, 100 Pack (Part No.20055-100)

MOOG Hub Assemblies – Suspension Knuckle Assembly (Part No.LK016)

Autel – Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers (Part No.MXSENSORCK)

Dill Air Control – TPMS 315MHz Banded Sensor (Part No.1048)

Dorman – Brake Dust Shield – 1 Pair (Part No.947-002)

Dorman – Wheel Stud: Serrated without Clip Head, M12-1.50 Thread Size, RHT, 1 Pack (Part No.610-443.1)

Dill Air Control – TPMS Service Kit: Diamond Stripe Color Coded Service Kit, 25 Piece (Part No.7020K)

Huf North America – Rubber – straight in screw (Part No.RDV043)

Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Black Anodized Valve Stem (Part No.VS925B)

Dill Air Control – Snap-In TPMS Service Kit: Rubber, 0.453 Inch Valve Stem Assembly, 25 Piece (Part No.VS-80)

Dorman – Wheel Lug Nut & Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.406" L, Chrome, 16 Nuts/4 Locks/1 Key (Part No.711-341)

McGard – Gold SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size) (Part No.65557GD)

MOOG Hub Assemblies – Suspension Knuckle Assembly (Part No.LK015)

Motorcraft – Wheel Hub (Part No.K70001349466MTR)

SKF – Wheel Hub Assembly (Part No.K7001458402SKF)

MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.512500)

Driveworks – Wheel Bearing and Hub Assembly: 5 Studs (Part No.NT512500)

Dorman – Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Bulge, 36 mm Length, Chrome, 4 Locks/1 Key (Part No.712-328)

Dorman – Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" Length, Pink, 20 Locks/1 Key (Part No.711-355L)

COAST TO COAST – 17 Inch, 5 Spoke, Silver, Plastic, Set Of 4 (Part No.IWC52517S)

COAST TO COAST – Wheel Cover, Imposter, Fits OE Wheel, 16 Inch, 5 Spoke, Chrome Plated, Plastic, Set Of 4 (Part No.IWCIMP337X)

Popular 2009 Ford Escape Wheels and Tires Categories

2009 Ford Escape Wheels and Tires

Top-Rated Wheels and Tires Brands For Your 2009 Ford Escape

Popular MOOG Hub Assemblies Wheels and Tires

Top-Rated Dorman Wheels and Tires

FAQs for 2009 Ford Escape Wheels and Tires

What are the most purchased Wheels and Tires for the 2009 Ford Escape?

What are the top-rated 2009 Ford Escape Wheels and Tires?

More Popular Parts for All Makes