2009 Dodge Ram 4500 Car Parts & Accessories

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal

This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
• Reliable design – engineered in North America and backed by long history of automotive aftermarket experience

STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:

• Restores the original opening and closing speeds of your hood, hatch or trunk
• Easy-to-install
• No special tools required
• Engineered for your application
• Easy lifting and reduced closing effort
• Consistent lifting force through 50,000 cycles
• Rust-resistant piston rod extends product life
• Dynamic damping technology, available on select lift supports

Door handles often corrode and fail over time due to corrosion and debris intrusion. This Dorman OE FIX direct replacement features an additional gasket for a better seal and longer life.

Product Features:

• Upgraded design – this direct replacement front right door handle includes an added gasket to prevent water intrusion
• Matching appearance – made of textured black plastic to match look and feel of the original handle on your vehicle
• Seamless replacement – designed to match dimensions and specifications of the stock handle
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

This tailgate support cable matches the fit and function of the original cables on specific vehicles. Made of quality materials, this durable cable is engineered to stabilize the tailgate over the long haul.

Product Features:

• Direct replacement – this tailgate support cable fits specific vehicles to preserve tailgate stability
• Durable construction – this part is made of quality materials for a long service life
• Saves money – offers quality at a competitive price while preventing tailgate damage
• Quality assured – this tailgate support cable has undergone virtual testing for fit, function and durability over time

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

This grab handle is designed to match the fit and appearance of the original handle on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this grab handle is designed to match the fit and appearance of the original handle on specified vehicles
• Restores functionality – this handle is made to fully restore appearance and functionality after the original part fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
• Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
• Safety compliant – part has undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

This parking brake handle assembly is designed to match the original components required to repair the assembly on specified vehicles, and is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this parking brake handle assembly is designed to match the original components required to repair the assembly on specified vehicles
• Restores functionality – this handle assembly is made to fully restore appearance and functionality after the original part fails
• Durable construction – this assembly is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This grab handle is designed to match the fit and appearance of the original handle on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this grab handle is designed to match the fit and appearance of the original handle on specified vehicles
• Restores functionality – this handle is made to fully restore appearance and functionality after the original part fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
• Reliable design – engineered in North America and backed by long history of automotive aftermarket experience

This jounce bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
• Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
• Safety compliant – part has undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
• Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
• Safety compliant – part has undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

This parking brake pedal release handle is designed to match the fit and function of the original handle on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this parking brake pedal release handle is designed to match the fit and function of the original handle on specified vehicles
• Restores functionality – this handle is made to fully restore appearance and functionality after the original part fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Door handles often corrode and fail over time due to corrosion and debris intrusion. This Dorman OE FIX direct replacement features an additional gasket for a better seal and longer life.

Product Features:

• Upgraded design – this direct replacement door handle includes an added gasket to prevent water intrusion
• Matching appearance – made of textured black plastic to match look and feel of the original handle on your vehicle
• Seamless replacement – designed to match dimensions and specifications of the stock handle
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
• Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
• Safety compliant – part has undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Tested to ensure trouble-free installation and performance, Dorman’s Door Window Switches are designed to last. They’re durable against water, debris, and constant use.

Product Features:

• Direct replacement for proper fit and function every time
• Housing made of high-quality plastic
• Designed to match the appearance of the original switch
• Driver’s side master switch as well as passenger and rear left and right switches available

Westin Molded Running Boards are straight board OE style designs, available in three universal lengths (72in, 79in, 93in). Universal running boards are made of an extruded aluminum base board, feature a 1-piece construction and provide step area grooves for secure footing. Available in lighted or unlighted styles. Universal running boards require a 27-series vehicle specific mounting kit, sold separately.

Product Features:

• OE Style
• UV Resistant Black Molded Polymer
• Extruded Aluminum Base Board
• Cradle Mounted Boards
• Customized Mounting Brackets Sold Separately
• Adds Perfect Finishing Touch To Vehicle

SG6 LED Running Boards are designed to be vehicle specific and require a mount kit (sold separately). Kit includes driver and passenger side e-coated steel mount brackets, complete with hardware and installation instruction sheet.

Product Features:

• Black Powder Coat Finish
• E-Coated Steel

Powerful, definitive and uncompromising as a mountain ridge, ARIES RidgeStep running boards are made for those who gets it done, day after day. With their solid, all-steel construction, non-skid treads and tough powder coat finish, RidgeStep running boards are made to finish the job. Installation of these running boards is easy and secure because they use the ARIES VersaTrac mounting system. The underside of each board is equipped with a channel that accepts a set of heavy-duty bracket inserts. The inserts move along the channel to fit your truck, and the mounting hardware provides a secure attachment. These running boards are designed to fit specific years of the Ram 1500, 2500, 3500, 4500 and 5500 (NOTE: This set of running boards includes vehicle-specific VersaTrac mounting brackets. See the application information to verify compatibility with your vehicle). ARIES RidgeStep running boards are not only made for easier installation, but they are also built to face the harsh elements of the commercial job. They feature high-strength, solid steel construction for a step that can keep up with those steel-toe boots, and they are completely without plastic parts, meaning they will not crack or fade over time. Their stamped, all-steel tread offers a 6-1/2″ wide, non-skid surface that will never wear down no matter how many times you climb in and out of your truck. The end caps are also made from steel and are welded to contour to the body of your truck for a professional finish. RidgeStep running boards come with a unique E-coat and textured black powder coat finish to not only withstand rust but also to hide minor scratches and grime.

Product Features:

• High-strength, all-steel construction with no plastic parts
• Angular design for a tough, no-nonsense look on hardworking trucks
• Stamped steel treads for a non-skid step that will never wear or crack
• Flat profile and 6-1/2″ width provide a comfortable step
• Textured black powder coat easily hides minor scratches and grime
• Dual-layer E-coat and powder coat finish for maximum corrosion resistance
• Welded steel end caps for a durable accent
• VersaTrac mounting system for easy installation and vehicle customization
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty, powder-coated steel mounting brackets for a solid step

Westins Platinum 4 Oval Nerf Step Bars feature OE styling and offer an alternative look and style to traditional round tube steps. Their larger size provides strength and confidence with a full 4″ wide recessed step area. Platinum 4 Oval Nerf Step Bars ar

Product Features:

• 90 Degree Mandrel Bends
• 4 in. Wide Step Pad
• 4.25 in. Wide At Widest Dimension
• Polished Stainless Steel
• Mount Kit Included
• Lifetime Warranty

Product Features:

• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Todays Vehicles
• Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Innovative Stylish Design
• Strong Construction To Hold Up Under Extreme Conditions
• Exclusive New Multi Mount System
• Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products

With over 70 years of manufacturing excellence, CARR is a third generation business that remains firmly committed to serving you. All CARR accessories are manufactured for a precise fit for today vehicles. Our manufacturing processes allows us to design products that give your vehicle unique personal style and appeal. Our cast aluminum construction is time-proven for durability and strength. All CARR products carry a limited lifetime warranty.

Product Features:

• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
• Rugged And Unique Tread Pattern Provides For Safe And Attractive Non-Slip Surface
• Innovative Stylish Design
• Strong Construction To Hold Up Under Extreme Conditions
• Multi-Mount And Vehicle-Specific Mount Systems
• Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products

Westin(TM) E-Series Nerf Bars are made of 3in. diameter round tubing and are vehicle specific designs. Step design and mounting technique varies by application (mounting kit included). They feature recessed area mounted step pads unique to E-Series Nerf Bars feature the Westin(TM) brand name and are UV resistant.

Product Features:

• Mount Kit Included
• 3 in. Round Step Bars
• Economical Step-Up Solution
• Vehicle Specific Applications
• Injection Molded Polymer Step Pad
• Recessed Step Area
• Bolt-On Installation; No Drilling Required

Product Features:

• Imperial mounting kit system
• For installation of transmission coolers and electric fans
• Provides quick, effective installation of Imperial products
• Contains nylon mounting rods, foam pads and locking buttons
• Atermarket electric fan and cooler mounting rods
• Made with the highest quality materials
• Quality machined for durability
• Removable buttons for relocation

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Matched cup and cone components ensures consistent quality and outstanding performance
• Industry leading coverage
• Professional technicians know they can depend on National

Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:

• Transmission cooler reinstallation kit
• Contains part numbers 248001, 226201, 240250 and 4 hose clamps
• Provides all hardware for reinstallation of Imperial transmission coolers
• Contains nylon mounting rods, foam pads, locking buttons, hose and fitting

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Controlled heat treating process for lasting performance and extended bearing life
• Industry leading coverage
• Professional technicians know they can depend on National

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

• High grade materials that are equal to or better than OE provide durability and long service life
• All ABS sensors are tested for proper fit, form, and function
• Wire diameter and sheathing same or larger than OE to ensure product quality
• Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
• Includes all necessary brackets and hardware

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to DODGE 06-10; RAM 11-22; STERLING TRUCK 08-10;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2006-2022
• Weight approx: 4 Lbs

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

This automatic transmission shifter cable matches the fit and function of the original equipment cable to ensure a trustworthy repair. Made of quality materials, it has been extensively tested to ensure a long service life.

Product Features:

• Direct replacement – this automatic transmission shifter cable matches the fit and function of the original equipment part
• Durable materials – this shifter cable is manufactured from quality materials for durability
• Cost-effective solution – offers original equipment quality at competitive price
• Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Matched cup and cone components ensures consistent quality and outstanding performance
• Industry leading coverage
• Professional technicians know they can depend on National

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design Type: Spring Loaded; Multi-Lip
• Compatible with most oils and EP lubricants at higher operating temperatures
• High resistance to oxidation and ozone and has low swell in hydrocarbon fluids
• Temperature range: -20°F to 300°F; -29°C to 149°C
• National® oil seals are recognized worldwide for their quality and reliable performance for every type of repair.

Product Features:

• Brand may vary by location

For modern, foot-operated clutches we offer hydraulic release systems that not only replace cable-actuated systems, they also fit into increasingly narrow engine compartments. Because there is no more friction from the cable, clutch wear is lowered dramatically while driving comfort improves.

ManTransSynchroAssy

ManTransCounterGear

ManTransSynchroAssy

ManTransSynchroAssy

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Transmission Module

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

ManTrans Input Shaft

AT Selector Cable

This transmission shift boot matches the fit and function of the original equipment boot that as become damaged or missing. Made of quality materials, this boot is designed for durability and has been validated for a proper fit.

Product Features:

• Ideal replacement – this transmission shift boot matches the fit and function of the original equipment boot for specific makes and models
• Durable materials – this shift boot is manufactured from quality materials for durability
• Cost-effective solution – offers original equipment quality at competitive price
• Quality tested – this part has undergone try-on testing to ensure a quality fit

Product Features:

• Brand may vary by location

ManTrans Synchro Key

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Provides long life while providing superior performance
• Excellent high temperature capabilities
• Compatible with wide range of fluids
• Temperature range: -50°F to 200°F; -46°C to 93°C

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Design improvements include extended life and quiet operation
• Industry leading coverage
• Professional technicians know they can depend on National

New Perfection Clutch Sets include the following: New OEM-style cover assembly, computer-tested for clamp load, plate lift, and finger height; new OEM-style clutch disc with facings built to exceed OEM specifications; new clutch release bearing meeting or exceeding OEM specifications (where supplied); new pilot bearing/bushing (where used); alignment tool for the perfect clutch installation (where available); hydraulic line disconnect tool (where used).

Product Features:

• New clutch disc with non-asbestos facings built to exceed OEM specifications for durability, safety, and positive engagement.
• Cover assembly is computer tested for clamp load, plate lift and finger height to ensure uniform and smooth operation
• Alignment tool included where available to ensure professional installation
• Where required, includes new pilot bearing or bushing to complete the job

Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability.

Product Features:

• Engineered and supported in the U.S.A. by our tech support team of experts in clutch system function
• Each unit includes vehicle-specific bulletins for accurate installation
• Online videos show step-by-step installation and bleeding procedures
• Includes pressure control valves, check valves, and fittings for ease of installation, bleeding, and maintaining OE performance levels

New clutch hydraulics are designed and engineered to meet Original Equipment Manufacturer Specifications and Performance.

Product Features:

• Engineered and supported in the U.S.A. by our tech support team of experts in clutch system function
• Each unit includes vehicle-specific bulletins for accurate installation
• Online videos show step-by-step installation and bleeding procedures
• Includes pressure control valves, check valves, and fittings for ease of installation, bleeding, and maintaining OE performance levels

New Perfection Clutch Sets include the following: New OEM-style cover assembly, computer-tested for clamp load, plate lift, and finger height; new OEM-style clutch disc with facings built to exceed OEM specifications; new clutch release bearing meeting or exceeding OEM specifications (where supplied); new pilot bearing/bushing (where used); alignment tool for the perfect clutch installation (where available); hydraulic line disconnect tool (where used).

Product Features:

• New clutch disc with non-asbestos facings built to exceed OEM specifications for durability, safety, and positive engagement.
• Cover assembly is computer tested for clamp load, plate lift and finger height to ensure uniform and smooth operation
• Alignment tool included where available to ensure professional installation
• Where required, includes new pilot bearing or bushing to complete the job

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

Voted #1 recommended Clutch products by installers since 2015. Luk, a Schaeffler brand pioneered the way from the conventional and self-adjusting clutch to the innovative double clutch. We carry a comprehensive product portfolio of complete clutch sets, pressure plates, discs, flywheels, slave and master cylinders and release bearings, The Luk product range also includes a large number of available single components, dampers and absorbers and hydraulic clutch lines.

Product Features:

• Application matched for OE form, fit, and function
• Manufactured with high-quality materials, using cutting edge technology and processes
• Stock photo – Actual parts and materials may vary.

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

• Application matched for OE form, fit, and function
• Manufactured with high-quality materials, using cutting edge technology and processes
• Stock photo – Actual parts and materials may vary.

Voted #1 recommended Clutch products by installers since 2015. Luk, a Schaeffler brand pioneered the way from the conventional and self-adjusting clutch to the innovative double clutch. We carry a comprehensive product portfolio of complete clutch sets, pressure plates, discs, flywheels, slave and master cylinders and release bearings, The Luk product range also includes a large number of available single components, dampers and absorbers and hydraulic clutch lines.

Product Features:

• Application matched for OE form, fit, and function
• Manufactured with high-quality materials, using cutting edge technology and processes
• Stock photo – Actual parts and materials may vary.

Voted #1 recommended Clutch products by installers since 2015. Luk, a Schaeffler brand pioneered the way from the conventional and self-adjusting clutch to the innovative double clutch. We carry a comprehensive product portfolio of complete clutch sets, pressure plates, discs, flywheels, slave and master cylinders and release bearings, The Luk product range also includes a large number of available single components, dampers and absorbers and hydraulic clutch lines.

Product Features:

• Application matched for OE form, fit, and function
• Manufactured with high-quality materials, using cutting edge technology and processes
• Stock photo – Actual parts and materials may vary.

LuK dual-mass flywheels absorb engine vibrations before they are transmitted to the driveline where they can create gear rattle. These units feature a built-in damper designed to isolate engine torque spikes and prevent transmission damage. By design, dual-mass flywheels cannot be resurfaced. This all makes the LuK dual mass flywheel the ideal solution. With one drawback: the higher the mass reactance of the vibrating masses, the more excessive the resonance increase and associated torque peaks. With the dual mass flywheel, this would be easily perceived when starting and stopping the engine; much more easily than with a conventional clutch system. Additionally: the smaller flymass of the engine has less of a stabilizing effect on the speed fluctuation of the engine. Thanks to decades of experience in clutch building, the LuK specialists were able to find an excellent solution to this problem. An additional damping device effectively prevents resonance overload. In normal operation, however, this additional damping device has no function and the torsional vibrations of the engine are filtered out by spring dampers. Friction and spring rate – the correct ratio is important. For optimal vibration isolation and soft resonance passage when starting and stopping the engine, the ratio between friction and spring rate must be optimal. The length of the springs is a key factor: The softer a spring, the more efficiently vibrations are isolated. The extra-long springs of the latest generation of dual mass flywheels significantly reduce the spring rate compared to a first generation dual mass flywheel. In routine driving operations, excessive resonance increases are kept almost completely away from the gearbox.

Product Features:

• Top driving comfort
• Absorbs vibrations
• Prevents noise
• Enables comfortable, low-revs driving
• Saves fuel
• Relieves crankshaft and gearbox

Dual Mass Flywheels (DMF) are made up of many components and are not meant to be re-surfaced or re-ground. When they are worn out, they will slip, sometimes confused with clutch slippage. Please call our tech line on how to identify a worn out dual mass flywheel.

Product Features:

• All components are closely matched as an assembly to ensure maximum dampening
• Extends transmission gear life by absorbing drive train vibrations
• New ring gear ensures positive starter engagement
• Engineered to properly fit the intended application with no modifications

LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.

LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to

The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

The LuK Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

The Sachs release bearing (also known as a throw-out bearing) is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces. Sachs clutch release bearings offer the conventional alignment function in a lightweight, compact body.

Product Features:

• Extended service life
• Compact, lightweight design
• Sealed for life with high performance, application-specific grease
• Simplified assembly
• Integrated functionality
• Design flexibility

Clutch Lever

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

This floor mat retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this floor mat retainer matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

KATS was created and developed as a truly effective product for cold weather and hard starting problems. Owners and operators of diesel and gas operated equipment have long known that delayed starts and slow starts mean big money losses in labor, maintenance and operating revenue. KATS Circulation Tank Heaters are designed to do one thing – Start engines FAST! KATS Circulation Tank Heaters are truly superior heavy duty patented products. This heater is thermostatically controlled 135-175 degrees. Our components are 100% made in the USA. Customers will find KATS Circulation Tank Heaters are unbeatable in pricing, quality and performance anywhere. KAT’S manufacturing quality control procedures assure you the very best anytime you install and operate a KAT’s system.

Product Features:

• Available for all size engines
• Equipped with check valve
• Fits most liquid cooled engines
• Installations easier and simpler
• New lower radiator hose connectors

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

• Saves wear and tear on your engine
• Simple installation directly into engine block

The WeatherTech All-Weather Floor Mats have deeply sculpted channels designed to trap water, road salt, mud and sand. Our proprietary engineered odorless resin ensures that these mats will not curl, crack or harden in sub-zero weather. Our All-Weather Floor Mats also have anti-skid ridges to prevent shifting in your vehicle and come with a protective, non-stick finish to make cleanup quick and easy. WeatherTech All-Weather Floor Mats are manufactured in America to ISO 9001 standards, and also meet FMVSS302 standards – your assurance of quality. Choose from Black, Tan or Grey to complement virtually any interior color. Available for cars, trucks, minivans and SUVs. All-Weather Floor Mats were intended to give the best possible protection for your vehicle floor.

Product Features:

• Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand
• They Won’t Curl, Crack Or Harden In Sub-Zero Weather
• Anti-Skid Ridges To Prevent Shifting In Your Vehicle And Come With A Protective, Non-Stick Finish To Make Cleanup Quick And Easy
• All-Weather Floor Mats Were Intended To Give The Best Possible Protection For Your Vehicle Floor

Regular stops to refuel can take their tole on your workday or extend your drive time on road trips with your 5th wheel trailer. Dee Zee Combo Auxiliary Transfer Tanks are tested and certified to hold diesel fuel for refueling equipment at the job site or for transferring directly to your truck fuel tank during longer commutes and storing tools of your trade.

Product Features:

• Made From Durable Brite-Tread Aluminum Construction
• Size And Style Variety Multiple Size Will Work For End User Specific Need
• Radius Bend Allow Liquid To Move Freely Inside The Tank At The Corner, Which Eliminate The Pressure On 90 Degree Weld Point
• Hydrostatically Pressure Tested To 29 Pound Per Square Inch
• Meets Federal DOT Requirements For UN31A And UN31B Tanks
• Made In USA

Need to replace your infotainment module without spending a fortune? This fully restored unit directly replaces your original module with all the exact same functionality as the factory equipment.

Product Features:

• Remanufactured Infotainment Display
• Remanufactured Infotainment Display
• Need to replace your infotainment module without spending a fortune? This fully restored unit directly replaces your original module with all the exact same functionality as the factory equipment.
• Direct replacement – this infotainment unit directly replaces and restores the functionality of the original module
• Application specific – this module specifically replaces the unit in certain vehicle years, makes and models with certain functions

Copper element for use in engine block coolant; Not model specific; Measure space and determine threading at installation location; Ensure quick winter starts; Most efficient type of heater; Direct OEM replacement in many applications; Includes power cord

Single heavy duty cord with male plug & silicone female connector

Cracked or wore out your key fob case? Want to add a custom look? Just replace the case with this convenient, affordable keyless entry transmitter cover, restoring or enhancing the look.

Product Features:

• Replacement or upgrade – this keyless remote case allows you to simply replace a broken case or upgrade your current look
• Seamless fit – matches dimensions of original transmitter cover for specific vehicle applications for a tight seal
• Reliable construction – keeps moisture and debris out of internal electronics for long service life
• Trustworthy quality – backed by team of product experts and engineers in the United States, and more than a century of experience

This High Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact and lightweight and they meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.

This Low Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact, lightweight and meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.

Transmission fluid temperature is the single biggest contributing factor to the lifespan of your automatic transmission. Having an accurate, realtime measurement allows you to know when to downshift or when to take your foot out of it. Whether you’re towing or simply trying to harness the power of a built or boosted motor, AutoMeter’s Digital Stepper Motor Trans Temp Gauge will give you the most accurate possible measurement for the exact temp of your trans fluid. AutoMeter’s most advanced 1/8″ NPT temperature transducer is included as well as a direct plug in wiring harness for ease of installation. An optional trans cooler line manifold is available for another easy installation option.

Product Features:

• Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
• Gauge kit includes 1/8″ NPT temperature sender, 3/8″ and 1/2″ NPT adapters, wiring harness, mounting hardware, and detailed instructions for installation
• Includes data acquisition grade temperature sender, providing unmatched accuracy and durability even in the harshest environments
• AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy while keeping hazardous fluids outside of the vehicle
• The accuracy of digital stepper motor gauges is further increased by utilizing a self calibration sequence during power up

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• Our parts are 100% tested to verify both mechanical and electrical switching performance.
• Decades of research to meet all of your needs
• Robust design and high grade materials meet the stringent demands of today’s service professional

Transmission fluid temperature is the single biggest contributing factor to the lifespan of your automatic transmission. Having an accurate, realtime measurement allows you to know when to downshift or when to take your foot out of it. Whether you’re towing or simply trying to harness the power of a built or boosted motor, AutoMeter’s Trans Temp Gauge will give you the most accurate possible measurement for the exact temp of your trans fluid. A single wire 1/8″ NPT temperature sender included to be installed in your transmission, transmission pan or with an optional transmission cooler line manifold is available for easy installation into a transmission cooler hard line.

Product Features:

• Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
• 12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
• Gauge kit includes 1/8″ NPT temperature sender, 3/8″ and 1/2″ NPT adapters, mounting hardware, and detailed instructions for installation
• AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle

Product Features:

• Clean OEM-like fit and finish – Gauges do not obstruct the driver’s view of the road and are positioned at optimum viewing angles for at-a-glance readings
• For use with 2-1/16″ AutoMeter gauges
• Paint-To-Match
• Includes required mounting hardware

Our replacement pedal pads are made of hardened rubber, ridged and designed to withstand continual wear and tear.

Product Features:

• Easy installation-just slip the pad onto the brake pedal
• Weather-resistant
• Direct replacement for proper fit
• Pedal pads can also be used on clutch (where applicable)

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Clean OEM-like fit and finish – Gauges do not obstruct the driver’s view of the road and are positioned at optimum viewing angles for at-a-glance readings
• For use with Edge Attitude and one 2-1/16″ AutoMeter gauge
• Paint-To-Match
• Includes required mounting hardware

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

Seeing the exact fuel pressure on your vehicle can mean the difference between extracting the most performance safely and expensive failures. AutoMeter’s Digital Stepper Motor Fuel Pressure Gauge will precisely measure your exact fuel pressure at levels of accuracy previously unheard of even in professional gauges. Designed for fuel injected or carbureted applications, our advanced 1/8″ NPT solid state pressure transducer provides the best possible measurements on the market with unparalleled resistance to vibration and heat. Don’t take chances with your investment; a precise fuel pressure gauge could be the cheapest insurance you’ve ever bought. A direct plug in wiring harness is included for ease of installation and data logging is available thanks to a .5 – 4.5v analog output.

Product Features:

• Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
• Includes data acquisition grade solid-state pressure transducer, providing unmatched accuracy and durability even in the harshest environments
• AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy while keeping hazardous fluids outside of the vehicle
• The accuracy of digital stepper motor gauges is further increased by utilizing a self calibration sequence during power up
• Gauge kit includes 1/8″ NPT stainless steel pressure transducer, wiring harness, mounting hardware, and detailed instructions for installation
• 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system

Product Features:

• Clean OEM-like fit and finish – Gauges do not obstruct the driver’s view of the road and are positioned at optimum viewing angles for at-a-glance readings
• For use with 2-1/16″ AutoMeter gauges
• Paint-To-Match
• Includes required mounting hardware

Product Features:

• Clean OEM-like fit and finish – Gauges do not obstruct the driver’s view of the road and are positioned at optimum viewing angles for at-a-glance readings
• For use with 2-1/16″ AutoMeter gauges
• Paint-To-Match
• Includes required mounting hardware

This replacement passenger airbag disable switch matches the fit and function of the original part to restore appearance and function. Installation is easy with factory-style electrical connectors.

Product Features:

• Ideal replacement – this passenger airbag disable switch matches the fit and function of the original part on specified vehicle years, makes and models
• Quality construction – made from premium materials to match the original appearance
• Cost-effective solution – offers original equipment quality at a competitive price
• Quality tested – this part has undergone testing to ensure a quality fit and long service life

AutoMeter steering column gauge mounts (pod) are covers that install over the top of your vehicle’s factory steering column shroud, providing a clean and convenient location to install an additional 2 1/16″ gauge or two in the driver’s field of vision. These products are vehicle-specific fitment to ensure proper fit and finish and are molded from durable ABS composite material with a black textured finish which can be painted to match your interior trim if desired.

Product Features:

• Clean OEM-like fit and finish – Gauges do not obstruct the driver’s view of the factory cluster and are positioned at optimum viewing angles for at-a-glance readings
• Seamlessly integrate 2-1/16″ AutoMeter gauges into your interior
• Attaches to the factory column cover for easy installation and includes required mounting hardware
• A great addition or alternative to the traditional A-pillar gauge mount
• Paint-To-Match
• High quality, composite construction is incredibly durable and looks great

AutoMeter has brought together the most popular diesel gauges into a complete, ready to install pillar kit. The kit includes a pyrometer (EGT), boost, transmission temperature gauge, and gauge pillar mount.

Product Features:

• Kit includes bulb and socket assemblies with red and green bulb covers

This direct replacement accelerator pedal position sensor matches the fit and performance of a failed original equipment sensor to restore proper vehicle operation. Made of quality materials for a reliable service life.

Product Features:

• Ideal replacement – this accelerator pedal position sensor matches the fit and function of the original sensor
• Plug & play installation – no special tools or programming required to install this sensor
• Trustworthy construction – engineered in North America and made from high-quality materials for long life
• Quality tested – this accelerator pedal sensor has undergone extensive testing to ensure proper function and a long service life

Seeing the exact fuel pressure on your vehicle can mean the difference between extracting the most performance safely and expensive failures. AutoMeter’s Digital Stepper Motor Fuel Pressure Gauge will precisely measure your exact fuel pressure at levels of accuracy previously unheard of even in professional gauges. Designed for fuel injected or carbureted applications, our advanced 1/8″ NPT solid state pressure transducer provides the best possible measurements on the market with unparalleled resistance to vibration and heat. Don’t take chances with your investment; a precise fuel pressure gauge could be the cheapest insurance you’ve ever bought. A direct plug in wiring harness is included for ease of installation and data logging is available thanks to a .5 – 4.5v analog output.

Product Features:

• Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
• Includes data acquisition grade solid-state pressure transducer, providing unmatched accuracy and durability even in the harshest environments
• AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy while keeping hazardous fluids outside of the vehicle
• The accuracy of digital stepper motor gauges is further increased by utilizing a self calibration sequence during power up
• Gauge kit includes 1/8″ NPT stainless steel pressure transducer, wiring harness, mounting hardware, and detailed instructions for installation
• 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system

Watching your precise exhaust temperature can mean the difference between maximum performance and catastrophic engine damage. On high output diesel or forced induction applications, there are few gauges that are more critical. AutoMeter’s Digital Stepper Motor display combined with our high definition LED backlighting make viewing your exact exhaust temperature effortless. The included Type K thermocouple assures maximum accuracy and minimum response time. There is, quite simply, not a better measurement of your exact exhaust gas temperature available anywhere, for any price. A variety of included installation options and direct plug in harness simplify installation on any application.

Product Features:

• Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
• The included Type K thermocouple assures maximum accuracy and minimum response time
• AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy which is further increased by utilizing a self calibration sequence during power up
• Gauge kit includes Type-K Thermocouple, wiring harness, thermocouple mounting kit, mounting hardware, and detailed instructions for installation
• 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system

Ultra high pressures in modern direct injected diesel applications require precise monitoring to assure the longevity and power output of your engine. Using AutoMeter’s advanced Digital Stepper Motor Drive, this gauge provide the most accurate possible reading, professional grade reliability and smooth pointer movement. Connects directly to your factory sensor with an included wiring harness.

Product Features:

• Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
• Gauge kit includes wiring harness, mounting hardware, and detailed instructions for installation
• Included wire harness connects to original equipment fuel rail pressure sensor wiring
• AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy while keeping hazardous fluids outside of the vehicle
• The accuracy of digital stepper motor gauges is further increased by utilizing a self calibration sequence during power up
• 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system

Watching your precise exhaust temperature can mean the difference between maximum performance and catastrophic engine damage. On high output diesel or forced induction applications, there are few gauges that are more critical. AutoMeter’s Digital Stepper Motor display combined with our high definition LED backlighting make viewing your exact exhaust temperature effortless. The included Type K thermocouple assures maximum accuracy and minimum response time. There is, quite simply, not a better measurement of your exact exhaust gas temperature available anywhere, for any price. A variety of included installation options and direct plug in harness simplify installation on any application.

Product Features:

• Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
• The included Type K thermocouple assures maximum accuracy and minimum response time
• AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy which is further increased by utilizing a self calibration sequence during power up
• Gauge kit includes Type-K Thermocouple, wiring harness, thermocouple mounting kit, mounting hardware, and detailed instructions for installation
• 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system

Ultra high pressures in modern direct injected diesel applications require precise monitoring to assure the longevity and power output of your engine. Using AutoMeter’s advanced Digital Stepper Motor Drive, this gauge provide the most accurate possible reading, professional grade reliability and smooth pointer movement. Connects directly to your factory sensor with an included wiring harness.

Product Features:

• Traditional incandescent lighting illuminates around the perimeter of the dial
• Gauge kit includes wiring harness, bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
• Included wire harness connects to original equipment fuel rail pressure sensor wiring
• AutoMeter’s race proven digital stepper motor electric instruments provide unmatched accuracy while keeping hazardous fluids outside of the vehicle
• The accuracy of digital stepper motor gauges is further increased by utilizing a self calibration sequence during power up
• 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function
• Global coverage for import and/or domestic applications

Product Features:

• Optimally positions key performance data within driver’s field of vision
• Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware
• Tan textured finish which can be painted to match your interior if desired
• High quality, composite construction is incredibly durable and looks great
• Seamlessly integrate AutoMeter 2-1/16″ gauges into your interior

Product Features:

• Optimally positions key performance data within driver’s field of vision
• Professional fit and finish, this mounting solution attaches to the factory pillar effortlessly by utilizing the included mounting hardware
• Tan textured finish which can be painted to match your interior if desired
• High quality, composite construction is incredibly durable and looks great
• Seamlessly integrate AutoMeter 2-1/16″ gauges into your interior

Mechanical boost gauges have become the staple in boost pressure monitoring for all types of engines, gasoline, diesel, or otherwise. Ultra-precise bourdon tube meter movement ensures accuracy and durability not seen anywhere else in the industry. A simple 1/8″ NPT pressure connection requires no electrical hookup for operation. Includes 1/8″ NPT fittings and nylon line kit.

Product Features:

• Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
• AutoMeter’s race proven mechanical instruments provide trusted accuracy while being simple to install
• No electrical system required for gauge operation – compatible with every street or race vehicle
• Mechanical movements provide accuracy and durability even in the harshest environments
• Gauge kit includes 1/8″ nylon line, 1/8″ NPT compression fittings, 1/4″ NPT adapter, mounting hardware, and detailed instructions for installation

Mechanical boost gauges have become the staple in boost pressure monitoring for all types of engines, gasoline, diesel, or otherwise. Ultra-precise bourdon tube meter movement ensures accuracy and durability not seen anywhere else in the industry. A simple 1/8″ NPT pressure connection requires no electrical hookup for operation. Includes 1/8″ NPT fittings and nylon line kit.

Product Features:

• Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation
• AutoMeter’s race proven mechanical instruments provide trusted accuracy while being simple to install
• No electrical system required for gauge operation – compatible with every street or race vehicle
• Mechanical movements provide accuracy and durability even in the harshest environments
• Gauge kit includes 1/8″ nylon line, 1/8″ NPT compression fittings, 1/4″ NPT adapter, mounting hardware, and detailed instructions for installation

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.