from

$78.99

NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$115.99

ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$83.99

Ignition Coil Connector

from

$48.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$44.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Copper alloy conductors ensure superior electrical conductivity with low resistive losses
Our parts are 100% tested to verify both mechanical and electrical switching performance
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$145.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$9.99

GM Genuine Parts Studs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$73.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$80.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$519.99

ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.

Product Features:

These coils feature advanced bobbin technology.
Highly specialized silicone magnetic steel cores with optimized windings
Specialized high temperature epoxy filled housings resists shock, vibration, chemicals, and overall engine bay environment.
These are a direct performance bolt on upgrade.
The ACCEL bodies are molded in a dielectric high-strength material.
8 Pack

from

$991.99

MSD ignition’s Multiple Spark Coils (MSC) will fit in place of the stock Gen-III GM coils and connect directly to the factory connectors. Once installed, you’ll have the power and performance of higher energy sparks, crowned with MSD’s multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance. There are two types of housings for the MSD coils. Check your application for the visual match.

Product Features:

Multiple Sparks At Idle RPM
Direct Bolt-In to Factory Connectors
Improved Spark Energy And Voltage Output
Patented Winding Design and Materials

from

$66.99

This cabin air filter retrofit kit is designed to match the original filter that is required to restore proper cabin airflow on specified vehicles. Made of quality materials, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this cabin air filter retrofit kit is designed to match the original filter required to restore proper cabin airflow on specified vehicles
Ideal solution – this kit is a reliable replacement for the original filter that is clogged or has failed
Durable construction – this kit is made from quality materials to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$68.99

This cabin air filter retrofit kit is designed to match the original filter that is required to restore proper cabin airflow on specified vehicles. Made of quality materials, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this cabin air filter retrofit kit is designed to match the original filter required to restore proper cabin airflow on specified vehicles
Ideal solution – this kit is a reliable replacement for the original filter that is clogged or has failed
Durable construction – this kit is made from quality materials to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$42.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.

from

$71.99

Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Product Features:

Delphi knock sensors help maximize engine performance with all fuels
Delphi knock sensors prevent against engine damage from pre-ignition knocking
Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
Self-generating piezoelectric design requires no power to the sensor

from

$91.99

Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

from

$449.99

MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and 48,000 maximum volts. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.

Product Features:

Increased Spark Energy Over The Entire RPM Range Of The Engine
Coils Bolt In Place Of The Factory Units
Accepts OEM Connections For A Simpler Installation

from

$69.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$132.99

ACDelco GM Original Equipment Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Durable to help transfer high voltage pulses without damage
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$72.99

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
Identical OE end caps are designed to “click” into place for easy installation and a secure fit
Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

from

$8.49

The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.74 is a 14mm, 1.000 reach plug with a taper seat. It fits a wide variety of late model applications, especially Ford applications. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:

E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
Smoother Acceleration & Idle – The faster flame initiated by the The spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
Enhanced Heat Transfer: Three legs securing the Diamond FIRE electrode to the shell ensure excellent heat transfer and create more turbulence in the cylinder.
Wide Compatibility: The E3.74 spark plug is a 14mm, 1.000 reach plug with a taper seat, fitting a wide variety of late model applications, especially Ford vehicles.
Eco-Friendly Performance: Proven to reduce fuel consumption and improve hydrocarbon emissions, contributing to a cleaner environment.
Long-Term Efficiency: The Diamond FIRE side wire is designed for long-term use, maintaining increased power and reduced fuel consumption over time.

from

$4.49

Champion® Platinum Power spark plugs deliver powerful performance with their premium design. Featuring a platinum center electrode for long life and a fine-wire center electrode for greater ignitability, these spark plugs ensure optimal engine performance. The V-trimmed ground electrode promotes sharper spark focus, while the exclusive Heat-Active alloy allows electrodes to reach optimal temperature. The platinum-tipped center wire resists wear and helps maintain the proper gap specification over the life of the plug, making it a reliable choice for your vehicle.

Product Features:

Platinum Power- Premium Spark Plug. Powerful Performance.
Platinum center electrode for long life
Fine-wire center electrode for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Heat-Active alloy allows electrodes to reach optimal temperature
Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug
Platinum Center Electrode: Features a platinum center electrode for extended durability and long life.

from

$22.14

Built to match the original equipment in length and fit, ACDelco OES Ignition Wires offer a performance advantage over many aftermarket products.

Product Features:

ACDelco ignition wires are designed to be like Original in critical areas such as cable length and diameter, terminal design and insulator position
Have broad coverage available for most vehicles on the road today from 1980 to present
Provide a high degree of Radio Frequency Interference (RFI) suppression
Are designed to offer fit, form and function for optimum performance
Kevlar reinforced fiberglass core in select sets for increased strength
Core sheathed in radio-static absorbent material for increased RFI suppression
Wire-wound, stainless steel alloy conductor for maximum spark delivery and RFI suppression on most applications
A layer of conductive heat-resistant latex for added durability
Insulating rubber-based compound inner jacket helps minimize voltage drop and enhance durability
Thick silicone outer jacket for excellent heat resistance
Limited lifetime warranty*

from

$28.99

ACDelco GM Original Equipment Spark Plug Wires consist of a single wire, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Durable to help transfer high voltage pulses without damage
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$19.99

ACDelco GM Original Equipment Spark Plug Wires consist of a single wire, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Durable to help transfer high voltage pulses without damage
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$21.99

Shock Absorber

from

$39.99

Shock Absorber

from

$6.29

IDEMITSU Premium PSF is specifically engineered to meet the demanding performance requirements of Honda and Acura power steering units. This advanced technology fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.IDEMITSU Premium PSF can also be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.

Product Features:

Unique friction technology provides efficient and noise-free operation
Advanced formulation technology provides outstanding protection to the entire power steering system while delivering smooth performance under the most severe operating conditions
Superior low temperature performance for easy flow and protection against cavitation and elimination of “squawking” and “squealing”
Excellent compatibility with seals, gaskets and internal components to reduce the potential for leaks and ensures smooth performance over extended intervals
Robust anti-wear and inhibitor chemistry provides enhanced component and fluid durability and long-life