2009 Audi R8 Engine Cooling Parts

Essential 2009 Audi R8 Engine Cooling Parts

Permatex – Ultra Grey RTV Silicone Gasket Maker, 0.5 OZ (Part No.22074)

Ultra Grey RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Meistersatz – Water Pipe O-Ring (Part No.G2026860201MEI)

Water Pipe O-Ring

from

$2.50
Water Pipe O-Ring

Bosch – Auxiliary Water Pump (Part No.G3050137738BOS)

Auxiliary Water Pump

from

$109.62
Restore your vehicle’s cooling system to proper working order, and minimize the risk of premature failure, by installing a Bosch Auxiliary Water Pump. Bosch Auxiliary Water Pumps are designed to operate in the highly-stressful environment of today’s cooling systems. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:
  • OE Quality, reliability and service life
  • Leak-proof sealing of the drive
  • Fuel savings and reduced emissions
  • Cooling even without operation of the engine
  • CO²-reduction by optimized efficiency, speed control and reduced weight
  • Coverage of a wide hydraulic performance range
  • Reduced noise level
See More

Pierburg – Auxiliary Water Pump (Part No.G3050551811APG)

Auxiliary Water Pump

from

$156.27
Auxiliary Water Pump

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ

from

$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

Ultra Grey RTV Gasket Maker (9.5 oz.)

from

$32.99
OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:
  • Designed specially for high-torque and high vibration applications
  • Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
  • OEM specified
  • Low-odor, non-corrosive formula
  • Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)
See More

CRP – Cooling Hose Flange Plug (Part No.G202837841)

Cooling Hose Flange Plug

from

$0.86
Cooling Hose Flange Plug

Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA2338)

Engine Coolant Temperature Sensor

from

$23.99
None

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Elth – Water Temp. Sensor (Part No.C6020239910ELT)

Water Temp. Sensor

from

$22.47
Water Temp. Sensor

Beck/Arnley – Water Flange (Part No.147-0039)

Water Flange

from

$64.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Manufactured with high quality materials
  • Designed for underhood conditions
  • Quality constructed for durability
  • Application specific for this vehicle
See More

Permatex – Ultra Grey RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Ultra Grey RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Febi – Water Temperature Sensor O-Ring (Part No.C606032192FEB)

Water Temperature Sensor O-Ring

from

$1.83
Water Temperature Sensor O-Ring

Elring – SEAL RING – COPPER (Part No.4M20011240ELR)

SEAL RING - COPPER

from

$1.22
SEAL RING – COPPER

Motorad – Integrated Thermostat Housing: 185 Degrees (Part No.987-185)

Integrated Thermostat Housing: 185 Degrees

from

$582.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Engine Electric Water Pump: New, Plastic/Steel Housing (Part No.T1212)

Engine Electric Water Pump: New, Plastic/Steel Housing

from

$218.99
Carquest Premium auxiliary water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • Built to meet or exceed OE fit, form and function
  • All components necessary for installation are supplied with pump
  • 100% tested for reliable performance
  • Follow all enclosed instructions to maximize pump life and validate warranty
See More

2009 Audi R8 Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 2009 Audi R8. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 23 different Engine Cooling Parts in our inventory ranging from $0.86 to $582.99. That means you can find the exact parts or products you need to keep that 2009 Audi R8 running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 2009 Audi R8. Permatex, Carquest, and NTK are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 2009 Audi R8, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2009 Audi R8 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 2009 Audi R8 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2009 Audi R8 demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your R8 the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular Permatex Engine Cooling Parts

We carry Permatex parts in our stock across Water Pump Gaskets and Engine Water Pump Outlet Pipe Gaskets categories, plus more. For a 2009 Audi R8, our most popular Permatex Engine Cooling Parts include:
Ultra Grey RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(9)
Ultra Grey RTV Silicone Gasket Maker, 0.5 OZ
Water Pump Gaskets
Ultra Grey RTV Silicone Gasket Maker, 13 OZ
from $26.99
(7)
Ultra Grey RTV Silicone Gasket Maker, 13 OZ
Engine Water Pump Outlet Pipe Gaskets
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
from $19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Water Pump Housing Gaskets

FAQs for 2009 Audi R8 Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2009 Audi R8?

Out of 23 Engine Cooling Parts for the 2009 Audi R8, the most popular in our inventory are:
Engine Coolant Temperature Sensor
from $20.99
(3)
Engine Coolant Temperature Sensor
Coolant Temperature Sensors
The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ
from $17.49
This product is not rated
The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
Engine Coolant Temperature Sensor
from $29.99
This product is not rated
Engine Coolant Temperature Sensor
Coolant Temperature Sensors