2008 Toyota Sequoia Transmission Parts

Essential Transmission Parts for 2008 Toyota Sequoias

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

National – Multi Purpose Seal (Part No.221207)

Multi Purpose Seal

from

$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Carquest Premium – Automatic Transmission Speed Sensor (Part No.SNA1174)

Automatic Transmission Speed Sensor

from

$148.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Transmission Wiring Harness Connector (Part No.926-383)

Transmission Wiring Harness Connector

from

$45.99
This automatic transmission wiring harness connector matches the fit and function of the original equipment connector. Factory-style plug and terminals come with wiring pre-installed for quick, reliable splices into the original harness.

Product Features:
  • Time-saving replacement – this automatic transmission pigtail connector is pre-wired using a factory style plug and terminals.
  • Durable construction – this pigtail connector is made using corrosion-resistant terminals and sturdy connector.
  • Cost-effective solution – offers original equipment quality without the cost of replacing the entire harness
  • Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
See More

National – Shaft Repair Sleeve (Part No.99049)

Shaft Repair Sleeve

from

$19.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
See More

Driveworks – Oil Seal (Part No.S-3459)

Oil Seal

from

$7.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.208-S)

Bearings

from

$54.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

High Performance Transmission Oil Cooler

from

$67.99
Product Features:
  • Imperial high-performance transmission cooler
  • Size: 3/4″ x 7-1/2″ x 12-1/2″
  • SAE 45-degree fittings for maximum reliability
  • Electrostatic powder-coated to prevent corrosion
  • SAE 45 degree fittings for maximum reliability
  • Electrostatically powder coated to prevent corrosion
  • All aluminum lightweight construction
See More

National – Shaft Repair Sleeve (Part No.99181)

Shaft Repair Sleeve

from

$37.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Corteco – Extension Hsng. Seal (Part No.J508135704CFW)

Extension Hsng. Seal

from

$6.43
Extension Hsng. Seal

Carquest Premium – Neutral Safety Switch (Part No.NSC1047)

Neutral Safety Switch

from

$305.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18685)

Transmission Oil Pan Gasket

from

$9.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

National – Multi Purpose Seal (Part No.710689)

Multi Purpose Seal

from

$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Driveworks – Oil Seal (Part No.S-224820)

Oil Seal

from

$4.99
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

ATP – AT CONTR SOLENOIDS (Part No.RE-5)

AT CONTR SOLENOIDS

from

$295.99
AT CONTR SOLENOIDS

SKF – Axle Shaft Seal (Part No.K4021473844SKF)

Axle Shaft Seal

from

$12.57
SKF’s advanced PTFE oil seal offers optimum performance in extreme temperature and fluid environments. Other benefits of this seal include; reduced friction, longer service life, easier assembly, reduced weight and compact design.

Product Features:
  • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
  • The flanged design allows for easier and proper installation and helps avoid cocking.
  • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
  • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
See More

SKF – Differential Seal (Part No.J7040183450SKF)

Differential Seal

from

$27.29
Differential Seal

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-221207)

Auto Transmission Manual Shaft Seal

from

$4.79
Product Features:
  • Brand may vary by location
See More

Anchor – Transmission Mount: Rear, 1 Piece (Part No.9725)

Transmission Mount: Rear, 1 Piece

from

$74.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to TOYOTA 07-09;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2007-2009
  • Weight approx: 5 Lbs
See More

National – Bearings (Part No.109)

Bearings

from

$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Oil Seal (Part No.S-2025)

Oil Seal

from

$6.99
Product Features:
  • Brand may vary by location
See More

National – Multi Purpose Seal (Part No.710778)

Multi Purpose Seal

from

$15.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

DENSO – First Time Fit Speedometer Sensor (Part No.P4018237796ND)

First Time Fit Speedometer Sensor

from

$297.76
DENSO produces both Magnetic Resistant Element (MRE) type and Magnetic Pick-Up (MPU) type sensors.

Product Features:
  • DENSO MRE sensors have a pair of MREs on an Integrated Circuit (IC) chip: this unique design is extremely accurate, even just after an engine is started.
  • The molded IC chip is installed inside a cylindrical magnet so it is positioned closer to the gears that rotate with the cam or crank shaft: this design is almost 10 times more sensitive than Hall element type sensors.
  • DENSO uses a Polyphenylene Sulfide resin coating over the molded IC chip and cylindrical magnet for greater strength and superior resistance to substances like fuel, engine oil and emission byproducts
See More

Autopart International Inc – ABS Speed Sensor (Part No.N60302043505API)

ABS Speed Sensor

from

$85.23
ABS Speed Sensor

Mark Automotive – Automatic Transmission Drain Plug Seal (Part No.J5031281093MAM)

Automatic Transmission Drain Plug Seal

from

$3.19
Automatic Transmission Drain Plug Seal

Carquest Premium – Multi Purpose Relay (Part No.RAA1244)

Multi Purpose Relay

from

$40.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – A/C Compressor Control Relay (Part No.R6034)

A/C Compressor Control Relay

from

$15.05
The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts – parts that are unrivaled for quality, original look, fit, form & function, as well as coverage.

Product Features:
  • Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
  • Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
  • All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Upgrade your 2008 Toyota Sequoia with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2008 Toyota Sequoia, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Transmission Parts are key to keeping your Sequoia functioning at its best. At Advance Auto Parts, we offer a wide selection of 63 Transmission Parts for the 2008 Toyota Sequoia, designed to meet your needs without breaking the bank. From Automatic Transmission Pan and Gasket replacements to Automatic Transmission Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2008 Toyota Sequoia at great prices. Our Transmission Parts inventory for this model ranges from just $3.19 to $432.99, with an average price of $74.39. Our 63 Transmission Parts in stock come from 19 trusted brands, so you’re sure to find the right part for your 2008 Toyota Sequoia without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Toyota Sequoia, we stock popular OEM and aftermarket Transmission Parts from top names like Permatex, Imperial, Driveworks, and more. Permatex Transmission Parts start at just $6.99 and boast an impressive 5 stars average rating from customers. Imperial and Driveworks also bring quality to the table, with Transmission Parts available starting at $3.49, and at an average 4 stars rating. With 1,036 customer reviews and counting, our 2008 Toyota Sequoia Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Toyota Sequoia is always ready to roll. We’re committed to providing you with everything you need to keep your Sequoia in top shape, all in one place. Start shopping confidently below for your 2008 Toyota Sequoia!

Best-Selling Automatic Transmission Pan and Gaskets for 2008 Toyota Sequoias

Enhance the driving experience in your Toyota with 11 quality Automatic Transmission Pan and Gasket components, starting at $3.19.

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Sensor-Safe, High Torque RTV Silicone Gasket Maker

from

$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ

from

$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

from

$16.99
Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 90 minutes
See More

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18760)

Transmission Oil Pan Gasket

from

$23.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18736)

Transmission Oil Pan Gasket

from

$15.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

Ultra Grey RTV Gasket Maker (9.5 oz.)

from

$32.99
OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:
  • Designed specially for high-torque and high vibration applications
  • Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
  • OEM specified
  • Low-odor, non-corrosive formula
  • Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)
See More

Worldpac – AT PAN GASKET (Part No.J5040411632KIB)

AT PAN GASKET

from

$38.87
AT PAN GASKET

Felpro – AUTOMATIC TRANSMISSION OIL PAN GASKET (Part No.TOS 18740)

AUTOMATIC TRANSMISSION OIL PAN GASKET

from

$17.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Mark Automotive – Automatic Transmission Drain Plug Seal (Part No.J5031281093MAM)

Automatic Transmission Drain Plug Seal

from

$3.19
Automatic Transmission Drain Plug Seal

Most Popular 2008 Toyota Sequoia Automatic Transmission Parts

Customize your Toyota with 2 Automatic Transmission Parts products like Transmission Solenoids, all priced under $134.11.

WSO – AT Solenoid (Part No.J4006786376WSO)

AT Solenoid

from

$134.11
AT Solenoid

WSO – AT Solenoid (Part No.J4006786379WSO)

AT Solenoid

from

$129.87
AT Solenoid

Top Picks for 2008 Toyota Sequoia Transmission Seals

Upgrade Toyota Sequoias with top-quality Transmission Seals parts, including 18 OEM and aftermarket selections for your 2008 model.

Driveworks – Oil Seal (Part No.S-223830)

Oil Seal

from

$7.29
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Driveworks – Oil Seal (Part No.S-3459)

Oil Seal

from

$7.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Multi Purpose Seal (Part No.221207)

Multi Purpose Seal

from

$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi Purpose Seal (Part No.710689)

Multi Purpose Seal

from

$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi Purpose Seal (Part No.224820)

Multi Purpose Seal

from

$7.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi Purpose Seal (Part No.710697)

Multi Purpose Seal

from

$18.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi Purpose Seal (Part No.473677)

Multi Purpose Seal

from

$5.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Shaft Repair Sleeve (Part No.99049)

Shaft Repair Sleeve

from

$19.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
See More

Driveworks – Oil Seal (Part No.S-473677)

Oil Seal

from

$3.49
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Multi Purpose Seal (Part No.710779)

Multi Purpose Seal

from

$12.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Driveworks – Oil Seal (Part No.S-2025)

Oil Seal

from

$6.99
Product Features:
  • Brand may vary by location
See More

National – Multi Purpose Seal (Part No.710265)

Multi Purpose Seal

from

$8.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-221207)

Auto Transmission Manual Shaft Seal

from

$4.79
Product Features:
  • Brand may vary by location
See More

Koyo – Automatic Transmission Seal (Part No.J507048821KOY)

Automatic Transmission Seal

from

$19.49
Automatic Transmission Seal

NOK – Extension Hsng. Seal (Part No.J5081789325NOK)

Extension Hsng. Seal

from

$17.78
Extension Hsng. Seal

National – Multi Purpose Seal (Part No.710778)

Multi Purpose Seal

from

$15.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

SKF – Axle Shaft Seal (Part No.K4021473844SKF)

Axle Shaft Seal

from

$12.57
SKF’s advanced PTFE oil seal offers optimum performance in extreme temperature and fluid environments. Other benefits of this seal include; reduced friction, longer service life, easier assembly, reduced weight and compact design.

Product Features:
  • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
  • The flanged design allows for easier and proper installation and helps avoid cocking.
  • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
  • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
See More

Corteco – Extension Hsng. Seal (Part No.J508135704CFW)

Extension Hsng. Seal

from

$6.43
Extension Hsng. Seal

In-Demand Transmission Mounts for 2008 Toyota Sequoias

Select from 4 premium Transmission Mounts parts for your 2008 Toyota Sequoia, with prices ranging from $71.99 to $99.99.

Anchor – Transmission Mount: Rear, 1 Piece (Part No.9882)

Transmission Mount: Rear, 1 Piece

from

$99.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to TOYOTA 07-21;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2007-2021
  • Weight approx: 5 Lbs
See More

Anchor – Transmission Mount: Rear, 1 Piece (Part No.9519)

Transmission Mount: Rear, 1 Piece

from

$89.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to TOYOTA 07-19;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2007-2019
  • Weight approx: 3 Lbs
See More

Anchor – Transmission Mount: Rear, 1 Piece (Part No.9725)

Transmission Mount: Rear, 1 Piece

from

$74.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to TOYOTA 07-09;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2007-2009
  • Weight approx: 5 Lbs
See More

Anchor – Transmission Mount: Rear, 1 Piece (Part No.9522)

Transmission Mount: Rear, 1 Piece

from

$71.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to TOYOTA 07-21;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2007-2021
  • Weight approx: 5 Lbs
See More

Most Sold 2008 Toyota Sequoia Transmission Cooler and Parts

Explore our best-selling Toyota parts for the 2008 Sequoia among 12 OEM and aftermarket options starting from $39.99.

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

High Performance Transmission Oil Cooler

from

$85.99
Product Features:
  • Imperial high-performance transmission cooler
  • Size: 3/4″ x 10″ x 15-7/8″
  • SAE 45-degree fittings for maximum reliability
  • Electrostatic powder-coated to prevent corrosion
  • SAE 45 degree fittings for maximum reliability
  • Electrostatically powder coated to prevent corrosion
  • All aluminum lightweight construction
See More

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Maxi-Kool® XL Transmission Oil Cooler

from

$73.99
The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:
  • Imperial Maxi-Cool® plate and fin transmission cooler
  • Size: 3/4″ x 11″ x 7-1/2″
  • Mid-size and full-size cars, pickups
  • GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
See More

Imperial – Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (Part No.243006)

Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty

from

$59.99
Product Features:
  • Imperial Rapid-Cool« plate and fin transmission cooler
  • Size: 3/4″ x 11″ x 6″
  • Sub-compact to compact cars
  • GVWR up to 18,000 lbs.
  • Compatible with OEM cooler systems
See More

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)

Econo-Kool® Transmission Oil Cooler

from

$54.99
Product Features:
  • Imperial Econo-Kool« tube and fin transmission cooler
  • Size: 3/4″ x 5″ x 15-7/8″
  • Compact and mid-size cars
  • GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)

Econo-Kool® Transmission Oil Cooler

from

$39.99
Product Features:
  • Imperial Econo-Kool« tube and fin transmission cooler
  • Size: 3/4″ x 5″ x 12-1/2″
  • Sub-compact to compact cars
  • GVWR up to 12,000 lbs.
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243012)

Maxi-Kool® XL Transmission Oil Cooler

from

$81.99
Product Features:
  • Class “A” motor homes, large travel trailers, 5th-wheel trailers
  • GVWR up to 30,000 lbs.; towing up to 10,000 lbs.
See More

Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)

Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty

from

$80.99
Product Features:
  • Imperial Rapid-Cool« plate and fin transmission cooler
  • Size: 3/4″ x 11″ x 9-1/2″
  • Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
  • GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
  • 33% more efficient than a comparable tube and fin design
See More

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Econo-Kool® Transmission Oil Cooler

from

$52.99
Product Features:
  • Mid-size and full-size cars, pickups
  • GVWR up to 18,000 lbs.; towing up to 3,500 lbs
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

High Performance Transmission Oil Cooler

from

$81.99
High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:
  • Imperial high-performance transmission cooler
  • Size: 3/4″ x 7-1/2″ x 15-7/8″
  • SAE 45-degree fittings for maximum reliability
  • Electrostatic powder-coated to prevent corrosion
See More

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

High Performance Transmission Oil Cooler

from

$67.99
Product Features:
  • Imperial high-performance transmission cooler
  • Size: 3/4″ x 7-1/2″ x 12-1/2″
  • SAE 45-degree fittings for maximum reliability
  • Electrostatic powder-coated to prevent corrosion
  • SAE 45 degree fittings for maximum reliability
  • Electrostatically powder coated to prevent corrosion
  • All aluminum lightweight construction
See More

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242016)

Econo-Kool® Transmission Oil Cooler

from

$65.99
Product Features:
  • Imperial Econo-Kool« tube and fin transmission cooler
  • Size: 3/4″ x 7-1/2″ x 15-7/8″
  • Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
  • GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Dorman – Transmission Oil Cooler (Part No.918-248)

Transmission Oil Cooler

from

$324.99
This automatic transmission oil cooler is designed to match the function of an original cooler on specified vehicles. It is engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion, or damage.

Product Features:
  • Direct replacement – this automatic transmission fluid cooler is designed to match the function of an original cooler on specified vehicle.
  • Ideal solution – engineered to help maintain proper transmission fluid temperature when an original cooler has failed from heat, corrosion or damage.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Top-Rated Transmission Parts Brands For Your 2008 Toyota Sequoia

Shop for the best-rated brands offering Transmission Parts and other products for your 2008 Toyota Sequoias. Below you’ll find some of our best rated Transmission Parts from Permatex, Imperial, and Driveworks, and more. Transmission Parts from these brands that fit a 2008 Sequoia start at just $3.49 and are rated as high as 5 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2008 Toyota Sequoia Transmission Parts

When it comes to maintaining or upgrading your 2008 Toyota Sequoia, using quality Transmission Parts is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Transmission Parts, specifically designed for the 2008 Toyota Sequoia. With over 6 Permatex brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $19.49. Plus, with over 106 customer reviews and an average rating of 5 stars, you can trust that our Permatex Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Ultra Grey RTV Gasket Maker (9.5 oz.)
from
$32.99
This product is not rated

Ultra Grey RTV Gasket Maker (9.5 oz.)

“”

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ
from
$16.99
This product is not rated

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

“”

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge
from
$28.49
This product is not rated

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

“”

Popular Imperial 2008 Toyota Sequoia Transmission Parts

Imperial auto parts is one of the highest quality Transmission Part brands in the market. Any 2008 Toyota Sequoia owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 2008 Sequoia, Advance Auto Parts carries a full inventory of 11 Imperial Transmission Parts. Plus you will be keeping your Toyota in peak condition while saving money because prices on these Imperial Transmission Parts range from $39.99 to $85.99, plus, with more than 145 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

Econo-Kool® Transmission Oil Cooler
from
$65.99
This product is not rated

Econo-Kool® Transmission Oil Cooler

“”

High Performance Transmission Oil Cooler
from
$67.99
This product is not rated

High Performance Transmission Oil Cooler

“”

High Performance Transmission Oil Cooler
from
$85.99

(4)

High Performance Transmission Oil Cooler

“good quality,easy to install.”

FAQs for 2008 Toyota Sequoia Transmission Parts

Which Transmission Parts are best-sellers for 2008 Toyota Sequoias?

Out of 63 Transmission Parts that fit 2008 Toyota Sequoias, the following parts are the top sellers:

What’s the price range for 2008 Toyota Sequoia Transmission Parts?

Transmission Part prices for the 2008 Toyota Sequoia start at $3.19 and go up to $432.99 for the most premium parts.

What’s the average price of a Transmission Part for a 2008 Toyota Sequoia?

The average price for Transmission Parts for the 2008 Toyota Sequoia is $74.39. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Toyota Sequoia model years?

Yes, we currently carry Transmission Parts for 23 model years of Toyota Sequoias between 2001 and 2024. Transmission Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Transmission Parts for my 2008 Toyota Sequoia?

The cheapest 2008 Toyota Sequoia Transmission Parts we carry in stock are:

What are the top-rated Transmission Parts that fit the 2008 Toyota Sequoia?

Out of 1,036 reviews by customers, our 2008 Toyota Sequoia Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2008 Toyota Sequoia and their top-rated products:

Can I get help with 2008 Toyota Sequoia Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Transmission Parts and more.

What is your return policy for Toyota Sequoia Transmission Parts?

Advance Auto Parts keeps returns simple. For new Toyota Sequoia Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.