2008 Hummer H2 Differentials

Essential 2008 Hummer H2 Differentials

Yukon Gear – Minor Install Kit For GM 9.5" Differential (Part No.12062)

Minor Install Kit For GM 9.5" Differential

from

$175.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits 1998 and up GM 9.5″
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

Yukon Gear – Standard Open And Gov-Loc Cross Pin Bolt With M10X1.5 Thread For 9.5" And 9.25" GM IFS (Part No.33342)

Standard Open And Gov-Loc Cross Pin Bolt With M10X1.5 Thread For 9.5" And 9.25" GM IFS

from

$23.99
Product Features:
  • Cross pin bolt
  • Fits GM 9.5″ and 9.25″ IFS
See More

Yukon Gear – Differential Carrier (Part No.57015)

Differential Carrier

from

$251.99
Differential Carrier

Motive Gear – Differential Ring Gear Bolt (Part No.14012703)

Differential Ring Gear Bolt

from

$11.39
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

Yukon Gear – Standard Open Side Gear And Thrust Washer For 9.5" GM (Part No.33303)

Standard Open Side Gear And Thrust Washer For 9.5" GM

from

$8.99
Standard open side gear thrust washer for 9.5″ GM.

Product Features:
  • Side gear thrust washer
  • Fits GM 9.5″
See More

Yukon Gear – Pinion Nut (Part No.33152)

Pinion Nut

from

$9.99
Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
  • 7/8″ x 14 thread
  • 1 1/4″ socket
See More

Yukon Gear – Master Overhaul Kit For GM 9.25" IFS Differential, ’10 & Down (Part No.14095)

Master Overhaul Kit For GM 9.25" IFS Differential, '10 & Down

from

$669.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits 2010 and down GM 9.25″ IFS
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and silicone.
See More

Yukon Gear – 9.5 Standard Open Pinion Gear Thrust Washer (Part No.33374)

9.5 Standard Open Pinion Gear Thrust Washer

from

$28.99
9.5 Standard Open Pinion gear Thrust Washer.

Product Features:
  • Pinion gear thrust washer
  • Fits GM 9.5″
See More

Yukon Gear – Cross Pin Shaft For GM 9.5", Fits Standard & Dura Grip Or Eaton Posi Carrier (Part No.33205)

Cross Pin Shaft For GM 9.5", Fits Standard & Dura Grip Or Eaton Posi Carrier

from

$32.99
Product Features:
  • Cross pin shaft
  • Fits GM 9.5″
  • Dura Grip positraction
See More

Motive Gear – Pinion Seal (Part No.3896)

Pinion Seal

from

$15.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

Yukon Gear – Left Hand Carrier Bearing Adjuster For 9.25" GM IFS (Part No.33362)

Left Hand Carrier Bearing Adjuster For 9.25" GM IFS

from

$98.99
Left hand carrier bearing adjuster for 9.25″ GM IFS.

Product Features:
  • Side adjuster
  • Fits 2010 and down GM 9.25″ IFS
  • Left hand side
See More

MTC – Differential Drain P (Part No.J7065587755MTC)

Differential Drain P

from

$12.52
Differential Drain P

Felpro – Differential Cover Gasket (Part No.RDS 55477)

Differential Cover Gasket

from

$87.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Positraction Internals For 9.5" GM With 33 Spline Axles (Part No.16057)

Positraction Internals For 9.5" GM With 33 Spline Axles

from

$606.99
Yukon positraction internals for 9.5″ GM with 33 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects. These internals are for Eaton positractions only. They will not fit factory positractions.

Product Features:
  • Spider gear kit
  • Fits GM 9.5″ with Eaton positraction
  • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Motive Gear – Differential Carrier Gear Kit (Part No.GM9.5BI)

Differential Carrier Gear Kit

from

$176.99


Product Features:
  • GM9.5″ INTERNAL KIT (OPEN) 33 SPL. FRONT & REAR
See More

Yukon Gear – Dura Grip Positraction For GM 9.5" With 33 Spline Axles (Part No.26025)

Dura Grip Positraction For GM 9.5" With 33 Spline Axles

from

$1025.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 9.5″
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Pinion Install Kit For ’98 & Up GM 9.5" Differential (Part No.13076)

Pinion Install Kit For '98 & Up GM 9.5" Differential

from

$319.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1998 and up GM 9.5″
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Pro-King – Crush Sleeve (Part No.723B034)

Crush Sleeve

from

$3.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Pro-King – Differential Carrier Cover (Part No.743B758)

Differential Carrier Cover

from

$26.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes (Part No.30229)

Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes

from

$57.99
8.5, 9.5, & 8.2 Buick, Oldsmobile, Pontiac GM REDI sleeve yoke saver.Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits GM 8.5″, 9.5″ and 8.2″ Buick, Oldsmobile and Pontiac
See More

Yukon Gear – Differential Cover B (Part No.33572)

Differential Cover B

from

$7.99
Differential Cover B

Pro-King – Differential Pinion Shim Kit (Part No.743B200)

Differential Pinion Shim Kit

from

$13.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Pinion Nut Washer (Part No.33167)

Pinion Nut Washer

from

$14.99
Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

Product Features:
  • Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.
See More

Felpro – Differential Cover G (Part No.J7018977707FEL)

Differential Cover G

from

$9.86
Differential Cover G

USA Standard Gear – Ring & Pinion Gear Set For GM 9.25" IFS Reverse Rotation In A 5.13 Ratio (Part No.36222)

Ring & Pinion Gear Set For GM 9.25" IFS Reverse Rotation In A 5.13 Ratio

from

$312.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits GM 9.25″ front
  • 9.25″ ring gear
  • 30 spline pinion
  • 12 ring gear bolts
  • 5.13 ratio
See More

Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)

Tapered Roller Bearing

from

$6.79
Product Features:
  • Brand may vary by location
See More

Pro-King – Differential Internal Nest Kit (Part No.743B717)

Differential Internal Nest Kit

from

$221.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

2008 Hummer H2 Differentials

Maybe you’re in the middle of a full rebuild of that 2008 Hummer H2. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 127 different Differentials in our inventory ranging from $2.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 2008 Hummer H2 running smoothly.

Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 2008 Hummer H2. Valvoline, Royal Purple, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2008 Hummer H2, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 129 reviews in this category, some of the top rated parts include Multi Purpose Seal with 4.5 stars and Bearings with 3.9 stars.

So if you’re in the market for aftermarket Differentials to keep your 2008 Hummer H2 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2008 Hummer H2 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2008 Hummer H2 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your H2 the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 2008 Hummer H2 Differentials

What are the most purchased Differentials for the 2008 Hummer H2?

Out of 127 Differentials for the 2008 Hummer H2, the most popular in our inventory are:
Differential Cover Gasket
from $7.99
(20)
Differential Cover Gasket
Rear Differential Cover Gaskets
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil

What are the top-rated 2008 Hummer H2 Differentials?

Top-rated Differentials for your 2008 Hummer H2 based on customer reviews/ratings are:
Multi Purpose Seal
from $34.99
(8)
Multi Purpose Seal
“Nicely made. Heavy duty-just like factory parts.”
Bearings
from $23.99
(7)
Bearings
“Good price”
Cylindrical Bearing
from $31.99
(4)
Cylindrical Bearing
“excellent product”