2008 Ford F53 Ignition and Tune-Up Products

Below you will find various in-demand Ford Ignition and Tune-Up Products, components and accessories for your 2008 F53. Advance Auto Parts has popular F53 parts like Ignition Wires, Ignition Switches, Spark Plugs and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other F53 model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2008 Ford F53 Ignition and Tune-Up Products below and start saving instantly.

Popular 2008 Ford F53 Ignition and Tune-Up Products Categories

Standard Spark Plug Wires

Ignition Switch Actuators

Ignition Starter Switches

Ignition Switch Connectors

Essential Ignition and Tune-Up Products for 2008 Ford F53s

from

$78.99

The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:

Helically wound conductor suppresses electro and radio noise
Kevlar core combination for great strength and durability
Heavy Duty Terminals For Secure Connection
8mm silicone and synthetic jacket resists heat and abrasion
500 Ohms/ft. Resistance For Improved Spark Delivery And Power
Silicone Boots Protect Against High Exhaust Temps

from

$16.99

Motorcraft Ignition Boots are engineered to provide original equipment performance and reliability. All Motorcraft parts undergo rigorous lab and real-world tests in order to meet strict Ford engineering standards. Terminal ends are designed to help ensure they do not separate from the cable under normal service conditions. High dialectic insulation helps maintain and control voltage delivery while reducing radio frequency interference. The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles

Product Features:

Backed by Motorcraft’s Service Parts Warranty
Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
Boots must pass submerged and pressurized leak tests, as well as low temperature cycle tests.
Durability tests subject boots to 225,000 performance cycles including temperature extremes from minus 40 degrees F to 275 degrees F.
Motorcraft ignition components help prevent false check engine lights.

from

$56.99

Pc Cop Boots 97-11 Ford 8-Cyl

from

$71.99

These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction

from

$110.99

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$6.79

Product Features:

PREMIUM GRADE SILICONE: Designed to withstand harsh environments
OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
LIMITED WARRANTY: See package for details

from

$11.49

Carquest Premium spark plug boots are engineered to restore ignition boot reliability and performance. They are designed to meet or exceed original equipment (O.E.) specifications for fit, form and function. Our spark plug boots offer excellent heat resistance as well as maximum protection against spark loss. Carquest Premium spark plug boots are built with a durable silicone compound for resistance to high heat and abrasion, resulting in a longer-lasting ignition repair.

Product Features:

Product Features:

OE design provides an exact fit for your application
Provides excellent heat resistance as well as maximum protection against spark loss
Durable silicone compound for resistance to high heat or abrasion
Spring included with the spark plug boot
Design for direct compatibility
Multipack provides one time replace all COP for better deal

from

$140.99

Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. It’s a little more work, but in the end it will be worth it.

Product Features:

Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
Distributor Cap – Boots and Terminals Included
Incl. Mini-Stripper-Crimper

from

$48.99

Carquest Premium spark plug boot sets are engineered to restore ignition boot reliability and performance. They are designed to meet or exceed original equipment (O.E.) specifications for fit, form and function. Our spark plug boots offer excellent heat resistance as well as maximum protection against spark loss. Carquest Premium spark plug boot sets are built with a durable silicone compound for resistance to high heat and abrasion, resulting in a longer-lasting ignition repair. Carquest Premium spark plug boot sets include all boots needed for each vehicle application for a complete tune-up repair.

Product Features:

Product Features:

Complete set of boots for a complete tune-up and better value
OE design provides an exact fit for your application
Provides excellent heat resistance as well as maximum protection against spark loss
Durable silicone compound for resistance to high heat or abrasion
Spring included with the coil boot
Design for direct compatibility

from

$31.99

This ignition switch actuator is designed to match the appearance and function of the original actuator on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this ignition switch actuator is made to match the fit and performance of the original actuator on specific vehicle applications
Ideal solution – this actuator is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.49

NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:

SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
Enhanced Vehicle Performance: Delivers better overall engine performance, making it an excellent choice for those seeking an upgrade from standard spark plugs.

from

$28.99

NGK Laser Platinum spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applications. Laser platinum plugs provide stable idling, superior anti-fouling, improved fuel efficiency and lower emissions. High-grade pure alumina ceramic and 98% pure copper core prevents spark plug from overheating and provides reliable starts. Most Laser Platinum spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs
Enhanced Fuel Efficiency and Lower Emissions: These spark plugs contribute to improved fuel efficiency and reduced emissions, making them an eco-friendly choice.
Superior Anti-Fouling and Stable Idling: The advanced design provides stable idling and superior resistance to fouling, ensuring consistent engine performance.

from

$14.99

SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs

from

$6.99

The Double Platinum Spark Plug is engineered for exceptional durability and performance, making it a top choice for distributor-less ignition system (DIS) engines. Featuring a platinum-to-platinum design, it minimizes gap erosion and reduces misfires, ensuring a longer service life compared to copper and standard platinum plugs. Its yttrium-enhanced ground electrode delivers superior heat transfer, allowing it to withstand high temperatures and pressures for extended durability. The high alumina ceramic insulator optimizes thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for reliable operation. With a mid-projection center electrode and tapered seat type, this performance-grade spark plug is built to deliver consistent ignition and efficiency. Both the center and ground electrode tips are crafted from platinum, ensuring robust functionality and reliability. Designed to meet the demands of modern engines, this spark plug offers outstanding value and long-lasting performance.

Product Features:

Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
The multi-rib insulator prevents flash-over.
Designed with a mid-projection center electrode and tapered seat type to ensure consistent ignition and improved engine efficiency.

from

$99.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Direct-fit, OE replacement parts – identical to factory installed parts. Robust design helps provide long operating life and excellent performance.
All OE switch functions are maintained. Factory connectors help ensure a solid, positive connection. Provided factory mounting points ensure easy installation – new gaskets and attaching hardware is included, where applicable.

from

$62.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$58.99

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$15.79

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$122.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$8.29

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$73.99

Carquest Premium engine management products provide the right ignition coils for a wide range of domestic and import applications. They deliver the highest performance and durability under demanding conditions. Designed to meet OE quality and performance

Product Features:

Coils are designed and engineered to be an OE quality replacement for fit and performance
High-strength dielectric epoxy and 100% copper windings used to deliver high-temperature performance and vibration resistance
High-efficiency laminations produce a high-energy spark and reliable performance
Factories use ISO 9001 and IATF 16949 standards to deliver products designed to meet or exceed OE voltage output specifications
Top-quality components and materials used to deliver maximum performance and long service life under tough operating conditions
Long service life

from

$39.99

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$343.99

Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$61.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$84.99

As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:

First Time Fit
Built to DENSO Original Equipment Standards

from

$52.99

Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

from

$74.99

NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 years’ experience and are driven by extreme dedication to innovation, performance and quality. With state-of-the-art manufacturing, inventory and distribution facilities in North America and globally, NGK is dedicated to providing customers with world-class products and services. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience. NGK ignition coils have vast coverage including late-model domestic and import vehicles. NGK’s OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist.

Product Features:

OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
THE NGK DIFFERENCE: Featuring superior materials and design enhancements
EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

from

$41.99

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

Upgrade your 2008 Ford F53 with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2008 Ford F53, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your F53 functioning at its best. At Advance Auto Parts, we offer a wide selection of 35 Ignition and Tune-Up Products for the 2008 Ford F53, designed to meet your needs without breaking the bank. From Ignition Wire replacements to Ignition Switches upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 2008 Ford F53 at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $8.49 to $295.99, with an average price of $44.93. Our 35 Ignition and Tune-Up Products in stock come from 13 trusted brands, so you’re sure to find the right part for your 2008 Ford F53 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Ford F53, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like NGK, Motorcraft, Carquest Premium, and more. NGK Ignition and Tune-Up Products start at just $9.49 and boast an impressive 4.8 stars average rating from customers. Motorcraft and Carquest Premium also bring quality to the table, with Ignition and Tune-Up Products available starting at $9.99, and at an average 4.8 stars rating. With 284 customer reviews and counting, our 2008 Ford F53 Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Ford F53 is always ready to roll. We’re committed to providing you with everything you need to keep your F53 in top shape, all in one place. Start shopping confidently below for your 2008 Ford F53!

Best-Selling Ignition Wires for 2008 Ford F53s

Enhance the driving experience in your Ford with 2 quality Ignition Wire components, starting at $8.49.

show more show less

from

$9.99

Product Features:

OE design provides an exact fit for your application
Provides excellent heat resistance as well as maximum protection against spark loss
Durable silicone compound for resistance to high heat or abrasion
Spring included with the spark plug boot
Design for direct compatibility
Multipack provides one time replace all COP for better deal

from

$8.49

Product Features:

PREMIUM GRADE SILICONE: Designed to withstand harsh environments
OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
LIMITED WARRANTY: See package for details

Top Picks for 2008 Ford F53 Spark Plugs

Upgrade Ford F53s with top-quality Spark Plugs parts, including 12 OEM and aftermarket selections for your 2008 model.

show more show less

from

$14.49

Double Platinum Spark Plug (HJFS24FP) offers exceptional durability and reliability, making it the ideal choice for maintaining peak engine performance. Engineered to meet strict Ford standards, these spark plugs are an exact fit for Ford, Lincoln, and Mercury vehicles, ensuring seamless compatibility. Featuring platinum center and ground electrode tips, they resist oxidation and arc erosion, delivering long-lasting performance with service intervals of up to 100,000 miles. The multi-rib insulator design protects against misfires, while the advanced construction helps reduce fuel consumption, optimize emissions, and prevent false check engine lights. Backed by Motorcraft’s Service Parts Warranty, these spark plugs are crafted with high-quality materials to provide reliable performance across a wide range of domestic and import cars and trucks. Whether you’re replacing original equipment or upgrading, these spark plugs deliver the confidence and reliability you need for smooth, efficient operation.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.

from

$9.49

SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
Enhanced Vehicle Performance: Delivers better overall engine performance, making it an excellent choice for those seeking an upgrade from standard spark plugs.

from

$12.99

The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.70 is a 16mm, 0.860 reach plug with a taper seat. It fits Ford Triton applications from 2004 to 2008. E3.70 is a unique design that solves a problem with the original OE application. The shell is made as a single piece, as opposed to two pieces, so it resists seizing in the engine and breaking apart when being removed. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE ground electrode is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:

The design of the Ford Triton engine can a cause build of carbon on the spark Plug threads, which may make removal difficult. E3.70’s shell is made of a one-piece design, which means it WILL NOT break during removal.
E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
Enhanced Heat Transfer: Three legs secure the Diamond FIRE electrode to the shell, providing excellent heat transfer and creating more turbulence in the cylinder for better combustion.
Specific Fit for Ford Triton: The E3.70 spark plug is designed to fit Ford Triton applications from 2004 to 2008, ensuring compatibility and optimal performance for these vehicles.

from

$13.99

Autolite High Thread Pro plugs are expertly crafted for Ford 3V engines, offering unmatched durability and performance. Featuring a fine-wire platinum center electrode, these plugs deliver focused ignition power and extended service life, while the extra-long special electrode projection ensures optimal combustion efficiency. The ground strap enhances heat transfer, outperforming standard J-gap plugs, and the proprietary design boosts heat management, fouling resistance, and dielectric strength. With threads positioned above the cylinder head seating, these plugs create a compressive seal for improved engine reliability. The nickel-plated shell provides superior corrosion resistance, ensuring long-lasting performance even in demanding conditions. Designed and engineered in the USA, these spark plugs embody over a century of Autolite’s expertise, making them a premium choice for performance-grade ignition systems.

Product Features:

Engineered with a fine-wire platinum design that provides more focused ignition power and longer service life.
The ground strap provides improved heat transfer over standard J-gap plugs.
Its proprietary design improves performance for heat management, fouling resistance & increased dielectric strength.
The position of the thread above the cylinder head seating allows for a more compressive seal.
Designed with a nickel-plated shell that delivers increased protection against corrosion.
Engineered in the USA: Designed and engineered in the USA, leveraging over 100 years of Autolite’s engineering expertise and experience.

from

$17.99

NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:

SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
Outstanding Acceleration and High Fuel Efficiency: NGK Iridium IX spark plugs are engineered to deliver superior acceleration and enhance fuel efficiency, making them ideal for performance enthusiasts.
Extreme Ignitability and Anti-Fouling: These spark plugs offer exceptional ignitability and anti-fouling properties, ensuring reliable performance and longevity.

from

$21.99

Champion Double Platinum Power spark plugs are engineered for enhanced durability and performance, making them a premium choice for your vehicle. Featuring a platinum fine-wire center electrode and platinum pad ground electrode, these spark plugs deliver greater wear resistance and sharper spark focus for reliable ignition. The Heat-Active alloy ensures the electrodes reach optimal temperature, maintaining stable operation under all engine loads. With a V-trimmed ground electrode design, these spark plugs promote precise spark focus for improved ignitability. As an OE replacement, they are designed to seamlessly fit your vehicle, offering compatibility and dependable performance. Whether you’re seeking a standard replacement or aiming to boost your engine’s efficiency, these spark plugs provide powerful performance and long-lasting reliability.

Product Features:

Double Platinum Power – Premium Spark Plug. More Powerful Performance.
Platinum center and ground electrode for greater wear resistance
Maintains stable operating temperature under all engine loads
Fine-wire center electrode for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Heat-Active alloy allows electrodes to reach optimal temperature
OE Replacement: Designed as an original equipment replacement, ensuring compatibility and reliable performance for your vehicle.

from

$18.99

High Thread Platinum Spark Plug (PZK14F) offers exceptional durability and reliability, making it the ideal choice for maintaining peak engine performance. Engineered to meet strict Ford standards, these spark plugs are an exact fit for Ford, Lincoln, and Mercury vehicles, ensuring seamless compatibility and original equipment performance. Featuring a platinum center electrode tip, they resist oxidation and arc erosion, delivering long-lasting functionality with service intervals of up to 100,000 miles. The multi-rib insulator design protects against misfires, while the advanced engineering helps reduce fuel consumption, optimize emissions, and prevent false check engine lights. Backed by Motorcraft’s Service Parts Warranty, these spark plugs are crafted from high-quality materials to provide reliable performance across a wide range of domestic and import cars and trucks. Whether you’re replacing original components or upgrading for enhanced efficiency, these spark plugs deliver confidence and reliability for every drive.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.

from

$8.99

Champion Iridium Spark Plug is engineered for maximum performance and durability, making it the ultimate choice for demanding drivers. Featuring a fine-wire iridium center electrode and platinum ground electrodes, it delivers exceptional ignitability and a sharper spark focus for enhanced engine efficiency. The V-trimmed ground electrode ensures precise spark delivery, while the Heat-Active alloy allows the electrodes to quickly reach and maintain optimal operating temperatures under all engine loads. Designed with a tapered seat and resistor type, this premium spark plug offers superior performance and extended longevity. Whether you’re looking for stable operation or maximum life, the Champion Iridium Spark Plug is built to meet the highest Standards of reliability and performance.

Product Features:

Champion Iridium – Maximum Performance. Premium Spark Plug
Iridium center electrode delivers maximum life
Fine-wire center electrode and V-trimmed for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Maintains stable operating temperature under all engine loads
Heat-Active alloy allows electrodes to reach optimal temperature quickly
Platinum Ground Electrodes: Equipped with platinum ground electrodes, this spark plug promotes a sharper spark focus for enhanced ignitability.
Tapered Seat and Resistor Type: Designed with a tapered seat type and resistor type, the Champion Iridium Spark Plug ensures superior performance and longevity.

from

$28.99

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs
Enhanced Fuel Efficiency and Lower Emissions: These spark plugs contribute to improved fuel efficiency and reduced emissions, making them an eco-friendly choice.
Superior Anti-Fouling and Stable Idling: The advanced design provides stable idling and superior resistance to fouling, ensuring consistent engine performance.

from

$11.99

Autolite High Thread Pro plugs are expertly crafted for Ford 3V engines, offering unmatched performance and reliability. Featuring a fine-wire platinum center electrode, these plugs deliver focused ignition power and extended service life, ensuring your engine operates at peak efficiency. The extra-long special electrode projection enhances combustion precision, while the nickel-plated shell provides superior corrosion resistance for lasting durability. Designed with a tapered seat and a proprietary thread position above the cylinder head, these plugs create a compressive seal that boosts heat management and fouling resistance. The ground strap improves heat transfer compared to standard J-gap plugs, while the advanced dielectric strength ensures consistent performance under demanding conditions. Perfect for performance-grade applications, these spark plugs are engineered to optimize power, heat transfer, and ignition focus, making them a valuable upgrade for maintaining and enhancing your Ford 3V engine’s capabilities.

Product Features:

Engineered with a fine-wire platinum design that provides more focused ignition power and longer service life.
The ground strap provides improved heat transfer over standard J-gap plugs.
Its proprietary design improves performance for heat management, fouling resistance & increased dielectric strength.
The position of the thread above the cylinder head seating allows for a more compressive seal.
Designed with a nickel-plated shell that delivers increased protection against corrosion.

from

$19.49

Spark Plug: Enhanced Durability & Optimized Performance is engineered to meet strict Ford standards, ensuring original equipment performance and reliability for Ford, Lincoln, and Mercury vehicles. Designed with a fine wire platinum center electrode and nickel ground electrode tip, these spark plugs deliver exceptional durability, resist oxidation and arc erosion, and help eliminate misfires. The multi-rib insulator enhances protection against misfires, while the tapered seat type ensures a precise fit. With service intervals of up to 100,000 miles, these spark plugs reduce fuel consumption, optimize emissions, and prevent false check engine lights, offering peace of mind and long-lasting performance. Backed by Motorcraft’s Service Parts Warranty, they are crafted from high-quality materials to provide reliable performance across a wide range of domestic and import cars and trucks. Motorcraft Spark Plugs are the trusted choice for maintaining the integrity of your vehicle, as they are the same components used during manufacturing.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.

from

$15.49

Motorcraft Spark Plugs are expertly crafted to deliver enhanced durability, reliable performance, and optimized emissions for Ford, Lincoln, and Mercury vehicles. Designed with platinum center and ground electrode tips, these spark plugs resist oxidation and arc erosion, ensuring long-lasting functionality. The multi-rib insulator minimizes misfires, while the tapered seat type guarantees an exact fit for your engine. With service intervals of up to 100,000 miles, these spark plugs reduce fuel consumption and help prevent false check engine lights, offering peace of mind and cost savings. Backed by Motorcraft’s Service Parts Warranty, they are the original equipment choice for Ford Motor Company vehicles, providing the same trusted quality as when your vehicle was first manufactured. Perfect for domestic and import cars and trucks, Motorcraft Spark Plugs are engineered to meet strict Ford standards, making them a dependable solution for maintaining peak engine performance.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.

In-Demand Ignition Coils and Boots for 2008 Ford F53s

Select from 15 premium Ignition Coils and Boots parts for your 2008 Ford F53, with prices ranging from $11.49 to $295.99.

show more show less

from

$52.05

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$11.49

Product Features:

OE design provides an exact fit for your application
Provides excellent heat resistance as well as maximum protection against spark loss
Durable silicone compound for resistance to high heat or abrasion
Spring included with the spark plug boot
Design for direct compatibility
Multipack provides one time replace all COP for better deal

from

$77.99

First Time Fit
Built to DENSO Original Equipment Standards

from

$41.99

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$54.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$48.99

Product Features:

Complete set of boots for a complete tune-up and better value
OE design provides an exact fit for your application
Provides excellent heat resistance as well as maximum protection against spark loss
Durable silicone compound for resistance to high heat or abrasion
Spring included with the coil boot
Design for direct compatibility

from

$74.99

OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
THE NGK DIFFERENCE: Featuring superior materials and design enhancements
EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

from

$64.99

OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
THE NGK DIFFERENCE: Featuring superior materials and design enhancements
EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

from

$24.99

ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.

Product Features:

Specialized silicone magnetic steel cores are surrounded by precision wrapped windings using advanced bobbin technology which helps maintain the proper resistance and turn ratios necessary to deliver improved performance spark
Direct Plug In Replacement Direct OE Fit
Direct Plug In Replacement results in a Direct OE Fit
OBD ll Safe, so you won’t be throwing codes, just sparks
OBD II Compatible Safe
Improved Idle Quality
Resists Shock And Vibration
Resists Corrosion

from

$295.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$75.99

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

from

$61.99

First Time Fit
Built to DENSO Original Equipment Standards

from

$61.99

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

Coil No. 22790 is a direct performance replacement coil for Ford

from

$53.99

Edelbrock Coil No. 22790 is a single coil-on-plug coil designed as a direct performance replacement for the OEM coil on 2008-18 Ford 4.6L-5.4L V8 engines and the 6.8L Triton V10 engine. Each No. 22790 coil features advanced technology with heavy-duty primary and secondary windings inside of a corrosion-resistant housing. The enhanced windings in these coils offer higher energy and voltage output for greater spark and can help to provide quicker starts with improved idle quality. Coil housings are resistant to heat, shock, vibration and corrosion. This coil is available in a set of eight under No. 22791. For the Triton V10 engine, order one No. 22791 coil pack and two No. 22790 single coils for a set of 10.

Coil No. 22782 is a direct performance replacement coil for Ford

from

$46.99

Edelbrock Coil No. 22782 is a single coil-on-plug coil designed as a direct performance replacement for the OEM coil on 2004-08 Ford 4.6L-5.4L V8 engines. Each No. 22782 coil features advanced technology with heavy-duty primary and secondary windings inside of a corrosion-resistant housing. The enhanced windings in these coils offer higher energy and voltage output for greater spark and can help to provide quicker starts with improved idle quality. Coil housings are resistant to heat, shock, vibration and corrosion. This coil is available in a set of eight under No. 22783.

Most Sold 2008 Ford F53 Ignition Boots

Explore our best-selling Ford parts for the 2008 F53 among 3 OEM and aftermarket options starting from $16.99.

show more show less

from

$16.99

Backed by Motorcraft’s Service Parts Warranty
Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
Boots must pass submerged and pressurized leak tests, as well as low temperature cycle tests.
Durability tests subject boots to 225,000 performance cycles including temperature extremes from minus 40 degrees F to 275 degrees F.
Motorcraft ignition components help prevent false check engine lights.

from

$51.99

Product Features:

Complete set of boots for a complete tune-up and better value
OE design provides an exact fit for your application
Provides excellent heat resistance as well as maximum protection against spark loss
Durable silicone compound for resistance to high heat or abrasion
Spring included with the coil boot
Design for direct compatibility

from

$22.99

Backed by Motorcraft’s Service Parts Warranty
Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
Boots must pass submerged and pressurized leak tests, as well as low temperature cycle tests.
Durability tests subject boots to 225,000 performance cycles including temperature extremes from minus 40 degrees F to 275 degrees F.
Motorcraft ignition components help prevent false check engine lights.

Top-Rated Ignition and Tune-Up Products Brands For Your 2008 Ford F53

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 2008 Ford F53s. Below you’ll find some of our best rated Ignition and Tune-Up Products from NGK, Motorcraft, and Carquest Premium, and more. Ignition and Tune-Up Products from these brands that fit a 2008 F53 start at just $9.49 and are rated as high as 4.8 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular NGK 2008 Ford F53 Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2008 Ford F53, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. NGK ticks all of those boxes. We offer a wide selection of NGK Ignition and Tune-Up Products, specifically designed for the 2008 Ford F53. With over 2 NGK brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $9.49, with an average price of just $13.74. Plus, with over 8 customer reviews and an average rating of 4.8 stars, you can trust that our NGK Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $9.49

(2)

G-Power Spark Plug (ZNAR6AGP): Enhanced Durability & Fuel Efficiency

“Fit exaclty in my murano 2004”

from $17.99

(6)

Iridium IX Spark Plug: Outstanding Acceleration & High Durability

“These spark plugs made an amazing change to the way my truck runs. Even the transmission shifts better.”

Popular Motorcraft 2008 Ford F53 Ignition and Tune-Up Products

Motorcraft auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 2008 Ford F53 owner should feel confident when installing genuine Motorcraft parts in their vehicle. To ensure the best fit and performance for your 2008 F53, Advance Auto Parts carries a full inventory of 1 Motorcraft Ignition and Tune-Up Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these Motorcraft Ignition and Tune-Up Products range up to $14.49, plus, with more than 98 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

from $14.49

(98)

Double Platinum Spark Plug (HJFS24FP): Enhanced Durability & Reliability

“Great price on oem parts”

FAQs for 2008 Ford F53 Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 2008 Ford F53s?

Out of 35 Ignition and Tune-Up Products that fit 2008 Ford F53s, the following parts are the top sellers:

High Thread Platinum Spark Plug (PZK14F): Enhanced Durability & Reliability (11796548) – $18.99
DiamondFIRE Automotive Spark Plug (E3.70): More Power & Fuel Savings (10427066) – $12.99
High Thread Spark Plug: Enhanced Durability & Focused Ignition (20650267) – $13.99

What’s the price range for 2008 Ford F53 Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 2008 Ford F53 start at $8.49 and go up to $295.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 2008 Ford F53?

The average price for Ignition and Tune-Up Products for the 2008 Ford F53 is $44.93. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Ford F53 model years?

Yes, we currently carry Ignition and Tune-Up Products for 30 model years of Ford F53s between 1988 and 2022. Ignition and Tune-Up Products are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Ignition and Tune-Up Products for my 2008 Ford F53?

The cheapest 2008 Ford F53 Ignition and Tune-Up Products we carry in stock are:

Direct Ignition Coil on Plug Boot: Premium Silicone (11000170) – $8.49
Iridium Spark Plug (RET8ZWYPB): Maximum Performance & Longevity (11393159) – $8.99
G-Power Spark Plug (ZNAR6AGP): Enhanced Durability & Fuel Efficiency (11000352) – $9.49
Coil On Plug Insulator Boot: Spring included, Designed for direct fit (10002571) – $9.99
Coil On Plug Insulator Boot: Spring included, Designed for direct fit (10500906) – $11.49

What are the top-rated Ignition and Tune-Up Products that fit the 2008 Ford F53?

Out of 284 reviews by customers, our 2008 Ford F53 Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 2008 Ford F53 and their top-rated products:

Ignition Coils and Boots
- Coil On Plug Insulator Boot: Spring included, Designed for direct fit (10500906) – $11.49
- Coil on Plug Coil (10703815) – $52.05
- Direct Ignition Coil – Original Equipment Quality (10115673) – $77.99
Spark Plugs
- Coil On Plug Insulator Boot: Spring included, Designed for direct fit (10500906) – $11.49
- Coil on Plug Coil (10703815) – $52.05
- Direct Ignition Coil – Original Equipment Quality (10115673) – $77.99

What types of Ignition and Tune-Up Products do you sell for my 2008 Ford F53?

As of 11/2/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 2008 Ford F53:

Can I get help with 2008 Ford F53 Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Ignition and Tune-Up Products and more.

What is your return policy for Ford F53 Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Ford F53 Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2008 Ford F53 Ignition and Tune-Up Products

MSD Ignition – Wire Set; Street Fire; Multi-Angle plug; HEI; Universal (Part No.5550)

Motorcraft – Original Equipment Spark Plug Boot: No core (outer material Rubber) Core, Qty of 1 (Part No.WR-6133)

Accel – Pc Cop Boots 97-11 Ford 8-Cyl (Part No.128041)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040K)

Accel – 8Mm Super Stock Spiral Uni Rd (Part No.5040R)

NGK – Direct Ignition Coil on Plug Boot: Premium Silicone (Part No.58901)

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7087)

MSD Ignition – Wire Set; Super Conductor; 8-cyl. 90f Plug/90f Plug (Part No.31229)

Carquest Premium – Spark Plug Boot Set: 8 Boots, Meets or Exceeds OE Specifications (Part No.38-002FMP)

Dorman – Help – Ignition Cylinder Actuator (Part No.47510)

NGK – G-Power Spark Plug (ZNAR6AGP): Enhanced Durability & Fuel Efficiency (Part No.1698)

NGK – Laser Platinum Spark Plug (PZNAR6A11H): Enhanced Ignitability & Longevity (Part No.5507)

NGK – Iridium IX Spark Plug (TR55IX): Outstanding Acceleration & Durability (Part No.7164)

Autolite – Double Platinum Spark Plug: Enhanced Durability & Performance (Part No.APP103)

Motorcraft – Original Equipment (O.E.) Switch Assembly – Ignition (Part No.SW-6573)

Carquest Premium – Ignition Switch (Part No.CSC3797)

Carquest Premium – Ignition Switch (Part No.CSA1667)

Carquest Premium – Ignition Switch (Part No.CSA1801)

Carquest Premium – Multi-Use Connector (Part No.PTC3128)

Carquest Premium – Multi-Use Connector (Part No.PTA1283)

Carquest Premium – Ignition Coil (Part No.EBC1342)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1038)

Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 8 Count (Part No.EBC1517-8)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1001)

DENSO – Direct Ignition Coil – Original Equipment Quality (Part No.673-6000)

Delphi – Ignition Coil (Part No.GN10183)

NGK – Premium COP Type Ignition Coil: Meets or Exceeds OE Specifications (Part No.48717)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1045)

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7007)

NGK – Direct Ignition Coil on Plug Boot: Premium Silicone (Part No.58938)

Dorman – Help – Ignition Cylinder Actuator (Part No.47510)

Carquest Premium – Ignition Switch (Part No.CSC3797)

Carquest Premium – Multi-Use Connector (Part No.PTC3128)

Motorcraft – Double Platinum Spark Plug (HJFS24FP): Enhanced Durability & Reliability (Part No.SP-509)

NGK – G-Power Spark Plug (ZNAR6AGP): Enhanced Durability & Fuel Efficiency (Part No.1698)

E3 – DiamondFIRE Automotive Spark Plug (E3.70): More Power & Fuel Savings (Part No.E3.70)

Autolite – High Thread Spark Plug: Enhanced Durability & Focused Ignition (Part No.HT15)

NGK – Iridium IX Spark Plug: Outstanding Acceleration & High Durability (Part No.372)

Champion – Double Platinum Power Spark Plug (7989): Enhanced Durability & Performance (Part No.7989)

Motorcraft – High Thread Platinum Spark Plug (PZK14F): Enhanced Durability & Reliability (Part No.SP-546)

Champion – Iridium Spark Plug (RET8ZWYPB): Maximum Performance & Longevity (Part No.9406)

NGK – Laser Platinum Spark Plug (PZNAR6A11H): Enhanced Ignitability & Longevity (Part No.5507)

Autolite – High Thread Spark Plug: Enhanced Durability & Focused Ignition (Part No.HT2)

Motorcraft – Spark Plug: Enhanced Durability & Optimized Performance (Part No.SP-546-X)

Motorcraft – Spark Plug: Enhanced Durability & Optimized Performance (Part No.SP-509-X)

Driveworks – Coil on Plug Coil (Part No.26338)

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7087)

DENSO – Direct Ignition Coil – Original Equipment Quality (Part No.673-6003)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1045)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1519)

Carquest Premium – Spark Plug Boot Set: 8 Boots, Meets or Exceeds OE Specifications (Part No.38-002FMP)

NGK – Premium COP Type Ignition Coil: Meets or Exceeds OE Specifications (Part No.48717)

NGK – Premium COP Type Ignition Coil: Meets or Exceeds OE Specifications (Part No.48874)

Accel – Coil:Ford Mod Eng 3V Ext Boot (Part No.140033E)

Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 8 Count (Part No.EBC1519-8)

Delphi – Ignition Coil (Part No.GN10182)

DENSO – Direct Ignition Coil – Original Equipment Quality (Part No.673-6200)

Delphi – Ignition Coil (Part No.GN10233)

Edelbrock – Coil No. 22790 is a direct performance replacement coil for Ford (Part No.22790)

Edelbrock – Coil No. 22782 is a direct performance replacement coil for Ford (Part No.22782)

Motorcraft – Original Equipment Spark Plug Boot: No core (outer material Rubber) Core, Qty of 1 (Part No.WR-6133)

Carquest Premium – Spark Plug Boot Set: 8 Boots, Meets or Exceeds OE Specifications (Part No.38-006FMP)

Motorcraft – Original Equipment Spark Plug Boot: No core (outer material Rubber) Core, Qty of 1 (Part No.WR-6131)