from

$2.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Each gasket set is built to meet or exceed all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$231.99

Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.

Product Features:

Original equipment fit, form and function
Manufactured to precise OE performance specifications
O-ring seals included and installed on new IPR valve

from

$317.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$107.99

CARDONE Diesel Fuel Injector Kits conveniently contain all components needed to complete the entire job, while other suppliers sell each component individually. Each kit includes everything required for installation, ensuring leak free operation and reduced crank times due to fuel leaks. Each kit contains 100% new components, ensuring trouble-free installation, keeping both you and your vehicle on the road for many years to come.

Product Features:

All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$269.99

This fuel cooler is designed to match the fit and function of the original cooler on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel cooler is designed to match the fit and function of the original cooler on specified vehicles
Restores functionality – reliable replacement for an original cooler that has failed due to collision, road debris or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$127.99

This fuel cooler is designed to match the fit and function of the original cooler on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel cooler is designed to match the fit and function of the original cooler on specified vehicles
Restores functionality – reliable replacement for an original cooler that has failed due to collision, road debris or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.61

Fuel Injector O-Ring

from

$329.99

KIT – INJECTOR

from

$23.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
State-of-the-art designs that meet or exceed OE specifications
Top-of-the-line quality and performance
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$299.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

from

$14.29

The injector sleeve provides sealing and cooling between the diesel fuel injector and cylinder head. Improper sealing can lead to combustion gas and coolant leaks into the fuel system, which can result in engine misfire and injector failure. Replacing the sleeve at time of injector service or replacement ensures proper sealing, improving injector longevity.

Product Features:

Original equipment fit, form and function

from

$14.05

Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:

Direct fit replacement provides proper fit, form, and function
Quality-engineered replacement for faulty OE part, which can fail from improper installation and wear-and-tear from carbon buildup
Constructed from reinforced brass to seal and protect immediate area of injector bore within cylinder head
All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time

from

$9.49

Product Features:

Original equipment fit, form and function

from

$7.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$15.03

Motorcraft Fuel Injector O-Ring Kits are manufactured with premium quality in mind

Product Features:

All parts meet original equipment requirements for fit, finish and durability
Specifically engineered for Ford and Lincoln vehicles
Durability tested to meet demanding original equipment service life specifications
Helps maintain original performance standards

from

$12.99

All Motorcraft Seal designs undergo rigorous lab and real world tests in order to provide original equipment performance and reliability. Motorcraft Seals are extensively tested for proper seating and sealing under both temperature and pressure extremes.

Product Features:

Why Buy:
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the manufacture of the vehicle are included in these aftermarket replacement parts, ensuring the most current technology and performance

from

$75.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$145.99

CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:

100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle’s engine control management system.
Components are rated to handle demanding temperature variations for optimum reliability in every environment.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$89.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
Platinum connector threads reduce the number of connection points for faster reaction to change
Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
Ceramic board provides reliable voltage to eliminate engine rough-idle problems
Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed

from

$225.99

This replacement fuel injector harness matches the fit and function of the original equipment part to restore proper operation of the injection system. Made of quality materials, it features full insulated electrical connectors to prevent corrosion.

Product Features:

Ideal replacement – this fuel injector harness matches the original equipment part on specified vehicle years, makes and models
Durable construction – this harness includes fully insulated electrical connectors to prevent corrosion
Plug and play installation – made with factory-style connectors for quick, reliable installation
Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

from

$76.99

This replacement fuel injector harness matches the fit and function of the original equipment part to restore proper operation of the injection system. Made of quality materials, it features full insulated electrical connectors to prevent corrosion.

Product Features:

Ideal replacement – this fuel injector harness matches the original equipment part on specified vehicle years, makes and models
Durable construction – this harness includes fully insulated electrical connectors to prevent corrosion
Plug and play installation – made with factory-style connectors for quick, reliable installation
Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

from

$81.99

This repair solution allows for the replacement of broken, melted or damaged connector plugs, which can cause intermittent connections, resulting in engine misfire and hard-starting. New harness connector pigtail ensures proper electrical signals are supplied to the injectors and glow plugs.

Product Features:

Harness connects between valve cover gasket connector and fuel injectors and glow plugs
One required per side

from

$372.99

This complete repair solution allows replacement of the fuel injector harness on the Ford 6.0L Power Stroke engine. The harness connects between the Fuel Injection Control Module (FICM) and fuel injectors. Chafing and damage to the OE harness is common due to improper OE routing and contact with sharp engine components. This can result in an engine misfire or no-start condition or damage to other components in the system. This new harness allows proper routing to eliminate this condition.

Product Features:

Includes all new wiring and connectors
Upgraded harness wrap reduces potential for chafing
Includes technical bulletin and installation tips

from

$311.99

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.End of line testing using the exact OE test specifications.Guaranteed to provide OE performance and meet all emission specifications.Continuous improvement, manufactured with the latest upgrades to components and specifications. Bosch is a recognized OE leader in fuel systems technology, with more than 45 years of gasoline fuel injection experience. The fuel injection program provides vast coverage for Domestic, European, And Asian vehicles.

Product Features:

100% of injectors are end of line tested using the exact OE test specifications and equipment
Manufactured with the latest OE updates, so they can often be superior to the parts they replace
Manufactured using all OE tools and processes
Guaranteed to provide OE performance

from

$209.99

CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Includes 100% replacement of plunger and barrel to improve longevity over competitive units
Includes all new premium quality O-rings and seals
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$17.29

REMAN FUEL INJECTOR

from

$88.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
Fiber-optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box