Name: Premium Molded Coolant Hose
Brand: Gates
SKU: 23076
Price: 110.99 USD

from

$110.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$2.49

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time, which prolongs service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Caution: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$79.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$40.49

Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.

Product Features:

Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles
Durable construction – made of fuel-resistant materials to reduce future failure potential
Regulatory compliant – built to meet emission and inspection standards
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$131.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$30.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong pl

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$41.99

This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Designed for HD truck applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance
Forged Heavy Duty Steel Pulley designed to displace bearing heat. Precision machined face for smooth running surface. Tandem 6303 Ball Bearings for extended life.
Installation instructions included.

from

$20.29

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$42.87

The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) hoses, they are the only hoses recommended by Ford Motor Company. Motorcraft® hoses offer long-lasting quality – Ethylene-propylene diolefin monomer (EPDM) rubber used in most underhood hoses resists heat, oil, grease, antifreeze and all approved coolant additives.

Product Features:

Pre-shaped hose allows easy installation
Ethylene-propylene diolefin monomer (EPDM) rubber-over-braid construction resists cracking, swelling and splitting
Recommended by Ford Motor Company

from

$84.57

Acc. Belt Tension Pu

from

$83.82

Motorcraft Belt Tensioners are manufactured with premium quality in mind

Product Features:

Designed to provide less operating range variation under tension, helping to minimize premature failure and poor performance
Always application specific – no one-size-fits-all solution
Feature a cast-aluminum spring case and arm to resist cracking and fatigue
Sealed-for-life bearing helps provide long service life
Meets Motorcraft 10-year/150,000-mile durability specifications
Designed to perform in harsh underhood environment
Easy to install
Recommended by Ford Motor Company

from

$66.32

Built for passenger cars and light-duty trucks, Dayco’s extensive line of Poly Rib serpentine belts are engineered for high mileage, demanding drives found in today’s vehicles. As the manufacturer of the first original equipment multi-ribbed serpentine belt, Dayco’s commitment to automotive product excellence and innovation is unwavering. The Dayco Poly Rib W Profile serpentine belt is the most innovative advancement in serpentine belt design in more than 30 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds, the Dayco W Poly Rib serpentine belt delivers more than just OE-required quality. It delivers the solution to troublesome drive problems.

Product Features:

Constructed with aramid-reinforced EPDM compounds
Engineered to conform to high mileage, worn or misaligned drives
Helps eliminate noisy belt conditions Related Documents: (PDF 63.78 KB)

from

$20.07

Built for passenger cars and light-duty trucks, Dayco’s extensive line of Poly Rib serpentine belts are engineered for high mileage, demanding drives found in today’s vehicles. As the manufacturer of the first original equipment multi-ribbed serpentine belt, Dayco’s commitment to automotive product excellence and innovation is unwavering. The Dayco Poly Rib W Profile serpentine belt is the most innovative advancement in serpentine belt design in more than 30 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds, the Dayco W Poly Rib serpentine belt delivers more than just OE-required quality. It delivers the solution to troublesome drive problems.

Product Features:

Constructed with aramid-reinforced EPDM compounds
Engineered to conform to high mileage, worn or misaligned drives
Helps eliminate noisy belt conditions Related Documents: (PDF 63.78 KB)

from

$94.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts

from

$175.99

Litens was the Original Equipment (O.E.) supplier of this popular Ford F-Series/Super-Duty tensioner and offers this “O.E. Exact”* part for the aftermarket. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). This tensioner design include a heavy-duty steel pulley and a molded lift-feature on the arm to assist with belt removal and installation. As with the Litens Original Equipment tensioner, this replacement tensioner is produced in Canada. Designed for the 6.2L DOHC “Boss V-8” engine. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Professional Mechanics will change this tensioner in under 20 minutes.
Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore, d

from

$19.49

Product Features:

Used on cars and trucks when the original quick connector fails, or the replacement hose does not include them
Manufactured w/ a new design that retains the O-ring so they cannot get lost or damaged
Fit just as the OEM quick connects for easy installation as well as removal

from

$14.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$70.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong pl

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$32.49

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$20.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$45.99

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$142.99

This Litens Serpentine Belt Drive Component Kit fits 2005-2009 Ford F-250, F-350, F-450, E-150, E-250 w/4.6/5.4/6.8L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$108.99

This Litens Serpentine Belt Drive Component Kit fits 2011-2018 Ford E-150, E-250, E-350, E-450, F-450, F-550 w/4.6/5.4/6.8L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$107.99

HVAC HEATER PIPE

from

$28.49

This HVAC heater pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC heater pipe is designed to match the fit and function of the original tube on specified applications
Restores functionality – reliable replacement for an original part that is leaking or has failed due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$84.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$71.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

2008 Ford E-350 Super Duty Belts and Hoses

More 2008 Ford E-350 Super Duty Belts and Hoses Categories

Essential 2008 Ford E-350 Super Duty Belts and Hoses

Gates – Premium Molded Coolant Hose (Part No.23076)

Gates – Safety Stripe« Standard Straight Heater Hose (Part No.28409)

Yukon Gear – Seal Puller Tool (Part No.56063)

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Dorman – Fuel Filler Neck Hose (Part No.573-019)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 25 1/2 Inch Length (Part No.87969)

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 90 mm Diameter, 30 mm Smooth (Part No.89006)

Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 74 mm Diameter (Part No.900120A)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18" Long, 1.75" Diameter (Part No.E72052)

Motorcraft – Motorcraft Radiator Hose (Part No.G2000422843MTR)

INA – Acc. Belt Tension Pu (Part No.G6011117822INA)

Motorcraft – Motorcraft Accessory Belt Idler Pulley (Part No.G6020360549MTR)

Dayco – Poly Rib Serpentine Belt (Part No.W1000164543DAY)

Dayco – Dayco, Drive Belt (Part No.W10001221418DAY)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89257)

Litens – Serpentine Belt Tensioner: 1 Piece (Part No.999947A)

Gates – Quick-Lok½ Heater Hose Connector (Part No.28500)

Dorman – Help – Heater Hose Connector 3/4 In. Tube x 5/8 In. Hose (Part No.47164)

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 90mm Dia., 37.5mm Width, 8 Grooves (Part No.89519)

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 76 mm Diameter, 8 Grooves (Part No.89053)

Driveworks – Poly Rib Belt HD Serpentine Belt; 80.51 Long, 8 Rib Count, Heavy Duty (Part No.805K8)

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 99.865" Long, 6 Rib Count, Exact Fit (Part No.K060994HD)

Litens – Serpentine Belt Tensioner Kit: Includes Belt, Tensioner, and any applicable Idler Pulleys (Part No.LV999544E)

Litens – Serpentine Belt Tensioner Kit: Includes Belt, Tensioner, and any applicable Idler Pulleys (Part No.LV999544D)

Motorcraft – HVAC HEATER PIPE (Part No.KT-161)

Dorman – 90 Degree Molded Heater Hose: Steel, Direct Replacement (Part No.626-229)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.5" Long, 1.75" Diameter (Part No.E72568)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 26" Long, 1.72" Diameter (Part No.E71961)

Popular 2008 Ford E-350 Super Duty Belts and Hoses Categories

2008 Ford E-350 Super Duty Belts and Hoses

Top-Rated Belts and Hoses Brands For Your 2008 Ford E-350 Super Duty

Popular Dayco Belts and Hoses

Top-Rated Dayco Belts and Hoses

FAQs for 2008 Ford E-350 Super Duty Belts and Hoses

What are the most purchased Belts and Hoses for the 2008 Ford E-350 Super Duty?

What are the top-rated 2008 Ford E-350 Super Duty Belts and Hoses?

More Popular Parts for All Makes