2008 Ford E-350 Super Duty Drivetrains
More 2008 Ford E-350 Super Duty Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2008 Ford E-350 Super Duty, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2008 Ford E-350 Super Duty Drivetrains
Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)
from
$7.99
Dana 60 & Dana 70 Power Lok case bolt.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 60 and 70
- 7/16 x 14 thread
- 3.5″ long
- 9/16″ hex head
Yukon Gear – Replacement Complete Shim Kit For Dana 80 (Part No.55028)
from
$121.99
Product Features:
See More
- Complete shim kit for Dana Spicer 80
- 4.375″ O.D. pinion bearing application only
USA Standard Gear – Master Overhaul Kit Dana 60 Front (Part No.37020)
from
$339.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 front
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and gasket.
Yukon Gear – Dana 60 & Dana 61 Tracloc Clutch Set (Part No.16156)
from
$269.99
Dana 60 & Dana 61 TracLoc clutch set.
Product Features:
See More
Product Features:
- Clutch kit
- Fit Dana Spicer 60 Trac Loc positraction
Yukon Gear – Dana 60, Dana 70, 1350, 1410, 10.25", And 9.5" U-Joint Strap Kit (Part No.41193)
from
$17.99
U/joint strap kit, 10.25″, 9.5″, Dana 60, Dana 70, 1350 & 1410.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Ford 10.25″, GM 9.5″, Dana Spicer 60, 70, 70U and 70HD
- 1350 and 1410 u-joint size
- Includes two straps and four bolts
Yukon Gear – 10.25" & 10.5" Ford Carrier Installation Kit (Part No.57006)
from
$289.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 10.25″ & 10.5″ differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits Ford 10.25″ and 10.5″
- Includes carrier bearings and races and “super” carrier shim kit
Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.976-618)
from
$1011.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Spindle Nut (Part No.K1002831714DOR)
from
$42.79
Spindle Nut
Yukon Gear – Dana 60 Semi-Float C-Clip (Part No.33247)
Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)
NTN – Wheel Bearing (Part No.K8000345509NTN)
from
$87.01
Wheel Bearing
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)
from
$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.48 INCH / 63 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- NOT PICTURED: TWO DUST SHIELDS
Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)
from
$4.99
Product Features:
See More
- Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
- Fits standard open differentials only
Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)
from
$3.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18 (Part No.33037)
from
$4.99
Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2″ x 18.
Product Features:
See More
Product Features:
- Ring gear bolt for Dana Spicer 60, 70, 70U and 70HD
- 1/2″ x 18 thread
Yukon Gear – 1330 U/Joint U-Bolts, 5/16" X 1-9/16", (7260 & 7290 Billet) (Part No.41199)
from
$15.99
1330 U/joint U-bolts, 5/16″ X 1-9/16″, (7260 & 7290 BILLET).
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1330 u-joint size
- Includes two u-bolts and four nuts
Dorman – Rear Axle Differential Vent (Part No.924-263)
from
$9.49
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
- Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – 1480 Lifetime Series U/Joint (Part No.42023)
from
$98.99
Yukon 1480 Lifetime Series U/Joint. 4.188″ span ring span. 1.375″ cap diameter. Outside snap ring. This U/Joint is a driveline U/Joint.
See More
Yukon Gear – Bearing Install Kit For Dana 60 Rear Differential (Part No.11031)
from
$369.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 rear
- Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , oil baffles and slingers , marking compound and brush.
National – Wheel Bearing: Direct Fit, 1 Piece (Part No.R-1561-TV)
from
$52.99
Manufactured with premium-grade steel, National cylindrical bearings are designed and engineered to meet OE specifications.
Product Features:
See More
Product Features:
- STRONG AND DURABLE — Controlled heat treatment process for strength and durability
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for durability and performance
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- Professional technicians know they can depend on National
Spicer – INNER GEAR KIT (Part No.2003857)
from
$731.99
INNER GEAR KIT
Yukon Gear – Differential (Part No.26047)
from
$1168.99
Differential
Yukon Gear – 2011 & Up 10.5" Ford Pinion Seal (Part No.30347)
from
$32.99
Front axle inner seal REDI-sleeve for Dana 30 1.192″ shaft..Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion seal
- Fits 2011 and up Ford 10.5″
Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1410 U/Joint Size (Part No.41030)
from
$278.99
Yukon replacement yoke for Dana 60 and 70 with a 1410 U/joint size. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1410 u-joint size
- 4.188″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- Strap style
Motive Gear – Differential Pinion Shim Kit (Part No.1118)
Yukon Gear – Dana 60/70 Rear Axle Bearing And Seal Kit Replacement (Part No.10055)
from
$136.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Ford E350/F350 F/F Dana 60 & Dana 70 rear replacement axle bearing kit, 67-97. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Fits 1967-1997 Ford F350 and E350 rear with Dana Spicer 60 or 70
- Includes inner and outer bearings and races and axle seal
- Services one side
Yukon Gear – Zip Locker Switch (Part No.34015)
Yukon Gear – Zip Locker Soleniod Valve (Part No.34014)
Popular 2008 Ford E-350 Super Duty Drivetrains Categories
2008 Ford E-350 Super Duty Drivetrains
You count on your 2008 Ford E-350 Super Duty to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 421 Drivetrains ranging in price from $2.99 to $1,487.99, you’re sure to find everything you need for your 2008 Ford E-350 Super Duty.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 23 different brands like Valvoline, Moog, and National. 2008 Ford E-350 Super Duty Drivetrains start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 5,681 extensive product reviews on 2008 Ford E-350 Super Duty Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Premium Universal Joint with 4.0 stars and Greaseable Premium Universal Joint with 4.7 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2008 Ford E-350 Super Duty below to get started!
Top-Rated Drivetrains Brands For Your 2008 Ford E-350 Super Duty
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2008 Ford E-350 Super Duty running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, National, and even more.
Popular Anchor Drivetrains
You’ll find popular Anchor brand products across Drive Shafts and Axles. All are waiting to get your 2008 Ford E-350 Super Duty back on the road. Some of the top-rated Anchor products in these categories are:
Top-Rated Valvoline Drivetrains
If Valvoline are what you’re looking for, our inventory holds plenty. We stock Valvoline brand Drivetrains for your 2008 Ford E-350 Super Duty, and some of our most reviewed Valvoline parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2008 Ford E-350 Super Duty Drivetrains
What are the most purchased Drivetrains for the 2008 Ford E-350 Super Duty?
Out of 421 Drivetrains for the 2008 Ford E-350 Super Duty, the most popular in our inventory are:
What are the top-rated 2008 Ford E-350 Super Duty Drivetrains?
Top-rated Drivetrains for your 2008 Ford E-350 Super Duty based on customer reviews/ratings are:
