2008 Ford E-250 Air Conditioning Parts

Essential 2008 Ford E-250 Air Conditioning Parts

KAI – A/C Compressor, Piston Type, Pv6 110Mm Clutch Pulley, Direct Mount, Pad Fittings (Part No.ACP011397)

A/C Compressor, Piston Type, Pv6 110Mm Clutch Pulley, Direct Mount, Pad Fittings

from

$534.99
New Standard Replacement A/C Compressor, Piston Type, PV6 110MM Clutch Pulley, Direct Mount, Pad Fittings

Product Features:
  • Piston Type, PV6 110MM Clutch Pulley, Direct Mount, Pad Fittings
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26818)

O-Ring & Gasket A/C System Seal Kit

from

$16.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R134a and R12 refrigerants
  • Application specific
  • SUV and rear air applications
See More

Motorcraft – A/C Pressure Switch (Part No.R1054836769MTR)

A/C Pressure Switch

from

$49.68
When servicing air conditioning systems, choose Motorcraft climate-control components. They offer quality at a great value and are the only climate-control components recommended by Ford Motor Company.

Product Features:
  • All parts meet original equipment requirements for fit, finish and durability
  • Specifically engineered for Ford and Lincoln vehicles
  • Durability tested to meet demanding original equipment service life specifications
  • Helps maintain original performance standards
See More

Motorcraft – A/C Receiver Drier (Part No.R10401072703MTR)

A/C Receiver Drier

from

$189.87
A/C Receiver Drier

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T55564)

A/C Suction Line Hose Assembly

from

$49.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Motorcraft – A/C Pressure Switch (Part No.R1054325808MTR)

A/C Pressure Switch

from

$79.66
When servicing air conditioning systems, choose Motorcraft climate-control components. They offer quality at a great value and are the only climate-control components recommended by Ford Motor Company.

Product Features:
  • All parts meet original equipment requirements for fit, finish and durability
  • Specifically engineered for Ford and Lincoln vehicles
  • Durability tested to meet demanding original equipment service life specifications
  • Helps maintain original performance standards
See More

Carquest Premium – HVAC Temperature Control Switch Connector (Part No.PTA2069)

HVAC Temperature Control Switch Connector

from

$36.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest – A/C and Heater Relay (Part No.R3177)

A/C and Heater Relay

from

$23.29
Product Features:
  • Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
  • Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
  • All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
See More

KAI – A/C Compressor (Part No.ACP010635)

A/C Compressor

from

$323.99
New Standard Replacement A/C Compressor, FS18, 6 Groove

Product Features:
  • FS18, 6 Groove
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C Suction and Liquid Line Hose Assembly w/o Orifice Tube (Part No.T56042)

A/C Suction and Liquid Line Hose Assembly w/o Orifice Tube

from

$92.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Motorcraft – A/C Relief Valve (Part No.R1028680239MTR)

A/C Relief Valve

from

$60.75
A/C Relief Valve

Dorman – Power Outlet Socket (Part No.926-331)

Power Outlet Socket

from

$40.99
This 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles
  • Ideal solution – this socket is a reliable replacement for an original socket that is damaged or has failed due to fatigue or electrical malfunction
  • Durable construction – this socket is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – AC Pressure Switch (Part No.ABA1036)

AC Pressure Switch

from

$18.79
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
  • All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.
See More

Factory Air – Harness Connector (Part No.37235)

Harness Connector

from

$15.79
OE style connectors; Molded plastic construction; Quality contacts ensure proper conductivity; Universal applications
See More

Motorcraft – A/C Compressor Clutc (Part No.R1202680526MTR)

A/C Compressor Clutc

from

$19.27
A/C Compressor Clutc

Carquest Premium – A/C Compressor and Component Kit (Part No.5160K)

A/C Compressor and Component Kit

from

$491.99
Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators are helium leak tested prior to packaging.
  • Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • The specific PAG oil required by your vehicle application is included.
  • O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.
See More

Carquest Premium – HVAC Mode Selector Switch (Part No.BLC1028)

HVAC Mode Selector Switch

from

$47.99
Many systems within a motor vehicle provide the ability to control the function of the circuit with a common control switch. This replacement switch is a direct replacement for the original switch providing like-new operation and appearance.
See More

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26724)

O-Ring & Gasket A/C System Seal Kit

from

$24.49
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • Application specific
  • SUV & rear air applications
See More

Carquest Premium – A/C Liquid Line Hose Assembly w/o Orifice Tube (Part No.T56061)

A/C Liquid Line Hose Assembly w/o Orifice Tube

from

$56.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Compressor Clutch Connector (Part No.PTA1369)

A/C Compressor Clutch Connector

from

$40.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – A/C Clutch Cycle Switch Connector (Part No.PTA1128)

A/C Clutch Cycle Switch Connector

from

$20.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

TYC – A/C Evaporator (Part No.R1130358537TYC)

A/C Evaporator

from

$94.10
TYC brand Evaporators are designed to compliment and optimize a vehicle’s air conditioning system with years of trouble-free service. Tubes and fins are manufactured from high grade aluminum to improve longevity. Precision cut and stamped aluminum plates reduce weight and increase lifespan of the Evaporator. TYC brand Evaporators will fit perfectly and perform comparable to the original equipment.

Product Features:
  • OE Quality
  • All aluminum core
  • Precision cut and stamped aluminum plates
See More

Carquest Premium – A/C Black White Orifice Tube (Part No.T39071)

A/C Black White Orifice Tube

from

$4.99
Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • Color coded
See More

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T56143)

A/C Discharge Line Hose Assembly

from

$139.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Factory Air – System Mounted High Cut-Out Pressure Switch (Part No.20916)

System Mounted High Cut-Out Pressure Switch

from

$57.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

Dorman – Help – Air Conditioning Service Port Caps (Part No.54374)

Air Conditioning Service Port Caps

from

$7.99
This A/C service valve cap is designed to match the fit and function of the original cap on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this A/C service valve cap is designed to match the fit and function of the original cap on specified applications
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Factory Air – Cap and Valve A/C System Seal Kit (Part No.26780)

Cap and Valve A/C System Seal Kit

from

$25.99
Compatible with both R12 And R134a refrigerants; All the seals needed to complete the job; SUV And rear air applications; Application specific
See More

Carquest Premium – ABS sensor (Part No.ARC1005)

ABS sensor

from

$29.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

2008 Ford E-250 Air Conditioning Parts

Maybe you’re in the middle of a full rebuild of that 2008 Ford E-250. Maybe you just need a couple of Air Conditioning Parts. Either way, Advance Auto Parts has 59 different Air Conditioning Parts in our inventory ranging from $2.99 to $538.59. That means you can find the exact parts or products you need to keep that 2008 Ford E-250 running smoothly.

Air Conditioning Parts are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 2008 Ford E-250. Carquest Premium, Carquest, and Factory Air are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Air Conditioning Parts for your 2008 Ford E-250, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 128 reviews in this category, some of the top rated parts include System Mounted High Cut-Out Pressure Switch with 4.8 stars and O-Ring & Gasket A/C System Seal Kit with 5.0 stars.

So if you’re in the market for aftermarket Air Conditioning Parts to keep your 2008 Ford E-250 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Air Conditioning Parts Brands To Make Your 2008 Ford E-250 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2008 Ford E-250 demands trusted brand parts and products to keep it running. Many trusted brands of Air Conditioning Parts make up Advance Auto Parts’ inventory, and all are ready to help make your E-250 the best it can be. Be sure to browse some of our top Air Conditioning Parts brands and parts.

Popular Carquest Premium Air Conditioning Parts

We carry Carquest Premium parts in our stock across Expansion Valve and Orifice Tubes categories, plus more. For a 2008 Ford E-250, our most popular Carquest Premium Air Conditioning Parts include:
A/C Black White Orifice Tube
from $4.99
(2)
A/C Black White Orifice Tube
Expansion Valve and Orifice Tubes

FAQs for 2008 Ford E-250 Air Conditioning Parts

What are the most purchased Air Conditioning Parts for the 2008 Ford E-250?

Out of 59 Air Conditioning Parts for the 2008 Ford E-250, the most popular in our inventory are:
A/C and Heater Relay
from $23.29
(24)
A/C and Heater Relay
Air Conditioning Relays
Multi Purpose Relay
from $19.99
This product is not rated
Multi Purpose Relay
Air Conditioning Relays
Multi Purpose Relay
from $10.49
This product is not rated
Multi Purpose Relay
Air Conditioning Relays

What are the top-rated 2008 Ford E-250 Air Conditioning Parts?

Top-rated Air Conditioning Parts for your 2008 Ford E-250 based on customer reviews/ratings are:
System Mounted High Cut-Out Pressure Switch
from $57.99
(4)
System Mounted High Cut-Out Pressure Switch
“needed high pressure so I bought the low pressure too,put high pressure first work fine so I change both to be on the safe side”
O-Ring & Gasket A/C System Seal Kit
from $24.49
(2)
O-Ring & Gasket A/C System Seal Kit
“Great selection of sizes.”
Harness Connector
from $15.79
(2)
Harness Connector
“Cool”