2008 Chevrolet Silverado 1500 Steering and Chassis Parts
More 2008 Chevrolet Silverado 1500 Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 2008 Chevrolet Silverado 1500, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 2008 Chevrolet Silverado 1500 Steering and Chassis Parts
Carquest Premium – 3/8 Cap Seal – .370 (Part No.70018)
from
$30.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
See More
Belltech – Camber Adjustment, With 4 Control Arm Bushings (Part No.4955)
from
$98.99
If more adjustment for proper rear driveline angle is required, then our driveline alignment kits are your solution. A combination of driveshaft spacers, Pinion Shim Kit, center carrier bearing kit. Belltech driveline alignment kits can help make your driveline problems are a thing of the past
Product Features:
See More
Product Features:
- Engineered Application Specific Aluminum Spacers Allow For Angle Correction Of The Driveshaft
- Two Wedge Shaped Shims With Ranges From 1 To 6 Degrees New Spring Center Bolts And Nuts
- Adjustable Bracketry That Allows For Fine Tuning Of The Carrier Bearing Position To Your Vehicles Specific Needs
- Combination Of Driveshaft Spacers, Pinion Shim Kit, Center Carrier Bearing Kit
Powercraft – Pump Seal Kit (Part No.7918)
from
$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Dorman – Steering Shaft Double Cardan Joint (Part No.425-184)
from
$292.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
Product Features:
See More
Product Features:
- Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant – salt spray testing and premium coating help ensure future longevity
Powercraft – Pump Complete Rebuild Kit (Part No.7910)
from
$62.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rare Parts – Stab Bar Link Kit (Part No.RP22200)
from
$33.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Driveworks – Ball Joint (Part No.DW-K6540)
from
$57.99
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot provides extended temperature range and better wear resistance
- Test-proven stud material helps prevent premature stud failure
- Provides premium gauge steel construction for strength and durability
- Performance tested to ensure durability
Carquest Premium – Pressure Hose Assembly (Part No.37158)
from
$40.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Cardone – Power Steering Filter (Part No.20-0012F)
from
$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
MOOG – Tie Rod End (Part No.ES800948)
from
$88.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG – Caster/Camber Adjusting Kit (Part No.K100026)
from
$57.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Driveworks – Tie Rod End (Part No.DW-ES800223)
from
$40.49
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
Powercraft – Steering Gear Lower Pitman Shaft Seal Kit (Part No.8717)
from
$32.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
MOOG – Caster/Camber Adjusting Kit (Part No.K100159)
from
$72.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Carquest Premium – Return Hose Assembly (Part No.40149)
from
$46.49
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Heat/abrasion tubing protects vital areas
MOOG – Alignment Guide Pin, sold by each (Part No.K6716)
from
$2.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Replaces broken OEM pins
- Box of 12
Carquest Premium – R and P Bellow Kit (Part No.250-713093)
from
$23.49
CARQUEST PREMIUM Chassis parts are engineered and benchmarked to Original Equipment (OE) performance standards. CARQUEST PREMIUM Chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. CARQUEST PREMIUM Chassis has been rigorously quality-tested, meeting or exceeding OE specifications. CARQUEST PREMIUM Chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Engineered to protect steering rack from road contamination
- Hardware included for easier installation (where applicable)
Cardone – Rack and Pinion Assembly (Part No.22-1036)
from
$435.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Powercraft – Rack Pinion Seal Kit (Part No.9045)
from
$119.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Steering Gear Input Shaft Seal Kit (Part No.8777)
from
$15.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Steering Gear Major Seal Kit (Part No.8776)
from
$57.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Air Bag Connector (Part No.PTA2152)
from
$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Designed for the OE distributor as a direct replacement part
Rare Parts – Ball Joint (Part No.RP13200)
from
$105.99
Ball Joint
Dorman – Suspension Control Arm (Part No.522-803)
from
$207.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Power Steering Pump Pulley (Part No.300-200)
from
$29.99
This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
- Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Lares – Remanufactured Power Steering Pump (Part No.2237)
from
$111.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
PWR – New Power Steering Pump with Reservoir (Part No.60-5001R)
from
$298.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function
Product Features:
See More
Product Features:
- PWR Power Steering Pumps are 100% NEW and Engineered In North America
- All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
- Features our EXCLUSIVE DIE CUT FOAM PACKAGING, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
- Supplied with a Pre-Installed Reservoir, Reservoir Cap, EVO By-Pass Fitting, as well as the required Installation Seals, Washers, Return Line Clamp, and Instructions
- Enables you to achieve a more efficient, durable, and professional installation
Popular 2008 Chevrolet Silverado 1500 Steering and Chassis Parts Categories
2008 Chevrolet Silverado 1500 Steering and Chassis Parts
You count on your 2008 Chevrolet Silverado 1500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 119 Steering and Chassis Parts ranging in price from $2.99 to $1,046.99, you’re sure to find everything you need for your 2008 Chevrolet Silverado 1500.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 18 different brands like Moog, Driveworks, and Carquest Premium. 2008 Chevrolet Silverado 1500 Steering and Chassis Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 14,558 extensive product reviews on 2008 Chevrolet Silverado 1500 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Oil Cooler with 3.7 stars and Power Steering Filter with 3.8 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2008 Chevrolet Silverado 1500 below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 2008 Chevrolet Silverado 1500
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2008 Chevrolet Silverado 1500 running right for years to come. In our inventory you’ll find brands like Moog, Driveworks, Carquest Premium, and even more.
Popular MOOG Steering and Chassis Parts
You’ll find popular MOOG brand products across Camber Kits and Sway Bars. All are waiting to get your 2008 Chevrolet Silverado 1500 back on the road. Some of the top-rated MOOG products in these categories are:
Top-Rated MOOG Steering and Chassis Parts
If MOOG are what you’re looking for, our inventory holds plenty. We stock MOOG brand Steering and Chassis Parts for your 2008 Chevrolet Silverado 1500, and some of our most reviewed MOOG parts include:
FAQs for 2008 Chevrolet Silverado 1500 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 2008 Chevrolet Silverado 1500?
Out of 119 Steering and Chassis Parts for the 2008 Chevrolet Silverado 1500, the most popular in our inventory are:
What are the top-rated 2008 Chevrolet Silverado 1500 Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 2008 Chevrolet Silverado 1500 based on customer reviews/ratings are:
